Shadow-Caster SCM-CLX-RGBW-SS RGBW Courtesy Light Instruction Manual
- June 17, 2024
- shadow-caster
Table of Contents
Shadow-Caster SCM-CLX-RGBW-SS RGBW Courtesy Light
Product Information
Specifications
- Product Model: SCM-CLX-RGBW-SS
- Product Type: Front Facing Courtesy Light
- Version: 2024.01
Product Usage Instructions
Single Color Lighting
- To set the CLX Courtesy Light to illuminate in a single color (red, green, blue, or white), simply ground the corresponding wire color.
- For example, to set the light to green only ground the green wire.
Two Color Lighting
- To set the CLX Courtesy Light to illuminate with two colors, connect the selected color wiring to a 3-position switch.
- For example, to achieve a blue-white configuration, connect the blue and white wires to the switch.
Full RGBW Lighting
- To set the CLX Courtesy Light to illuminate with the full-color spectrum, connect all wires to a Shadow-Caster lighting controller.
- In this example, the connection is made to the Single Zone Lighting Controller (SCM-SZ-RGB).
- However, it could also be connected to the Light Commander series controllers (SCM-LC-N2K series).
Mounting Instructions
- Find a flat spot to mount the CLX Courtesy Light.
- Print the mounting template and tape it to your preferred mounting location.
- Drill the pilot holes and center holes according to the dimensions specified in the template.
- Apply a marine sealant around the base and mounting hardware.
- Use Perma-Seal connectors for the wiring.
- Install the stainless steel cover by snapping it into place over the top of the courtesy light to conceal the mounting hardware.
FAQ
Q: How do I set the CLX Courtesy Light to illuminate in a specific color?
- A: To set the light to a specific color, ground the corresponding wire color.
- For example, to set it to green, ground the green wire.
Q: Can I have the CLX Courtesy Light illuminated with two colors?
- A: Yes, you can connect the selected color wiring to a 3-position switch to achieve two-color lighting.
Q: How do I achieve full RGBW lighting with the CLX Courtesy Light?
- A: Connect all wires to a Shadow-Caster lighting controller, such as the Single Zone Lighting Controller (SCM-SZ-RGB) or Light Commander series controllers (SCM-LC-N2K series).
DESCRIPTION
- The Shadow-Caster® CLX Courtesy Light is an innovative solution for lighting accent and functional areas of your vessel.
- These front-facing lights have a true white channel for plenty of light efficiency, are waterproof, and are designed with a low profile to create a seamless look on your boat.
- Beautifully light your boat’s steps, coves, shelves, compartments, and work areas with our CLX Courtesy Lights.
SPECIFICATIONS
- Up to 80 lumens of white light
- Current draw 50mA for each channel (red, green, blue, and white)
- 12V DC, 300mA max current
- 1.5W max power dissipation
- UV-stabilized polycarbonate housing
- Stainless steel 316 polished bezel
- IP67 water-resistant design
- 5 conductor RGBW wire
- 3” x 1” x 0.32” [76.2 x 25.4 x 8.13mm]
LIGHT OUTPUT PATTERN
- The Shadow-Caster® CLX Courtesy Light provides an extra wide 160° angle of illumination to efficiently light your boat’s steps, coves, shelves, compartments, and work areas.
OPERATION, WIRING & USE SCHEMATICS
- The CLX RGBW has four independent color channels: red, green, blue, and a true 6000 Kelvin CCT white.
- Depending on the desired application, the light can be used as a single-color light, a two-color light with a switch, or used with Shadow-Caster® lighting controllers for dimming and full-color control.
SINGLE COLOR LIGHTING
- To set the CLX Courtesy Light to illuminate in a single color (red, green, blue, or white), simply ground the corresponding wire color.
- This example shows the green wire is grounded, fixing the color to green only.
TWO COLOR LIGHTING
- To set the CLX Courtesy Light to illuminate with two colors, connect the selected color wiring to a 3-position switch.
- This example shows a blue-white configuration.
FULL RGBW LIGHTING
- To set the CLX Courtesy Light to illuminate with the full-color spectrum, connect all wires to a Shadow-Caster lighting controller.
- This example shows the connection to the Single Zone Lighting Controller (SCM-SZ-RGB). A connection could instead be made to the Light Commander series controllers (SCM-LC-N2K series).
MOUNTING INSTRUCTIONS
- Find a flat spot to mount the CLX Courtesy Light.
- Print the mounting template and tape it to your preferred mounting location.
- Drill the pilot holes and center holes.
- Use a marine sealant around the base and mounting hardware.
- Use Perma-Seal connectors for the wiring.
- Install the stainless steel cover. This will snap into place over the top of the courtesy light to conceal the mounting hardware.
MOUNTING TEMPLATE & DIMENSIONS
IMPORTANT!
When printing installation templates, please ensure your printer is set to print at ‘Actual Size’ and double-check check all printed dimensions exactly match the specified dimensions.
SCALE 1:1
- Designed & Manufactured in Clearwater, FL
- © 2024 Shadow-Caster® LEDs. All rights reserved.
- Shadow-Caster® LED Lighting
- 2060 Calumet Street, Clearwater, FL 33765
- p: +1 727.474.2877 e: info@shadow-caster.com
- shadow-caster.com
Documents / Resources
|
Shadow-Caster SCM-CLX-RGBW-SS RGBW Courtesy
Light
[pdf] Instruction Manual
SCM-CLX-RGBW-SS, SCM-CLX-RGBW-SS RGBW Courtesy Light, RGBW Courtesy Light,
Courtesy Light, Light
---|---
References
- Trending | Caster.com
- LED Lighting for Boats & Yachts | Shadow-Caster
- LED Lighting for Boats & Yachts | Shadow-Caster
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>