shadow-caster SCM-ZC-Kit Multi-zone Lighting Controller Kit Instruction Manual

shadow-caster SCM-ZC-Kit Multi-zone Lighting Controller Kit

SCM-ZC-KIT BOX CONTENTS

• Multi-Zone Lighting Controller (SCM-MZ-LC)
• Zone Controller Remote (SCM-ZC-REMOTE)
• 1m Shadow-NET® Communication Cable (SCM-SCNET-01)
• 4 x SS316 Pan Head 8 x ¾” Mounting Screws
• Installation & Operation Manual
• Warranty and Registration Information

SCM-ZC-KIT OVERVIEW
The Shadow-Caster® Multi-Zone Lighting Controller Kit (SCM-ZC-KIT) includes a Multi-Zone Lighting Control box (SCM-MZ-LC) and Zone Control Remote (SCM- ZCREMOTE).  The SCM-MZ-LC Lighting Controller supplies fused power connections for up to 4 separate zones of user-selectable RGB or RGBW lighting. It can receive an analog music input, and also broadcasts multiple channels of digital commands to other devices on the Shadow-NET® bus (orange and yellow wires).

PRODUCT SERIAL NUMBER
You can add your product serial number here for warranty and product registration purposes. The serial number is located on a white label inside the housing of the SCM-MZ-LC. The SCM-ZC-REMOTE is an input device that sends commands to the SCM-MZ-LC. It is connected to the controller through a dedicated control bus with the supplied 1meter SC-NET cable. When connecting with optional Shadow-NET® devices, underwater lights will respond to Zone 1 commands, Down Lights will respond to Zone 2 commands and Spreader Lights will respond to Zone 3 commands. At initial power up the Shadow-NET® bus will broadcast messages to tell connected devices to turn off. This allows these devices to be used without a dedicated switch. When the MZ-LC controller receives a command to turn on, it will send a corresponding command to devices connected on the Shadow-NET® bus.

SCM-ZC-KIT TYPICAL WIRING DIAGRAM

SCM-ZC-REMOTE OPERATION

The Shadow-Caster® SCM-ZC-REMOTE provides individual or simultaneous control of 4 independent lighting zones when connected to the Multi-Zone Lighting Controller (SCM-MZ-LC). Use the tactile keypad to quickly change colors, brightness and lighting effects such as multi-color fade and music synchronization.

TURN CONTROLLER ON/OFF
To turn the controller On press the button. To turn the controller Off press the button for 2 seconds.

RETURN TO PREVIOUS SETTING AFTER POWERING OFF
If the remote gets powered off and you would like to restore the settings you previously applied, simply click the button twice.

APPLYING ADJUSTMENTS TO ZONES
To make adjustments to a specific zone, press the zone number, then make the desired adjustments. To apply to all zones, click the button instead of a zone number.

TURNING ZONES OFF
Select the desired zone(s) and press OFF. E.g. Press then turns zone 3 off.

ADJUST BRIGHTNESS
Select the desired zone(s) and use the buttons. E.g. Press then turns zone 3 brightness down by 2 steps.
CHANGING COLORS
Select the desired zone(s) and press a color (white, red, green or blue) or press or to advance to the previous/next color in the Color Index (see Color Index Cycle below).
E.g. Press then turns all zones red.

COLOR INDEX CYCLE

CHANGING MODES
Press the button to cycle through lighting effects:

1. Single Color Fade: The selected color will fade off and on.
2. Multi-Color Fade: Fades up and down and cycles between colors depending on selected color sequence.
   • Blue / White
   • Red / Green / Blue / White
   • All Colors
3. Multi-Color Change: Same color sequences as Multi-Color Fade, but maintains brightness on a color before fading to the next color.
4. Strobe / Flash: Flashes a specified color at a specified rate.
   • To adjust the color of a mode, use the or buttons.
   • To adjust the rate, press and hold the button and use either of the or buttons at the same time.

MUSIC SYNC
Select the desired zone(s) and press the button to activate music sync.
There are 3 different music sync modes:

1. Full-Color Frequency: Different frequency ranges from the music drive the intensity of different colors.
2. Single Color Amplitude: The brightness of lights is driven by the different intensities of the music. In this use the or buttons to select a single color.
3. Multi-Color Amplitude: Similar to Single Color Amplitude, but colors are rotating continuously.

OPTIMIZING MUSIC SYNC

1. Turn music to typical listening volume, and press PAUSE on your stereo system. This will provide the lighting controller with an input signal representative of the audio system background noise.
2. Press and hold while repeatedly clicking the button until the lights start blinking, then clickbutton one click at a time until the lights do not blink or flicker – this sets the system sensitivity to just above the audio systems noise floor.
3.  While still holding press PLAY on your stereo system, now adjust or to set the signal averaging. This adjusts how quickly the sound responds to the music.

ADJUST THE BACKLIGHTS OF THE CONTROLLER
Press and hold the button and use either of the or buttons until the desired brightness is achieved.
SAVING SETTINGS
Once everything is configured as you wish press the button to save the your settings.

INSTALLATION

SCM-ZC-REMOTE INSTALLATION
The backlit lighting controller should be panel mounted and installed in an easy-to-reach location. The sealed keypad is washdown rated (IP66) and installation in exposed areas is acceptable.

1. Drill a 3″ diameter mounting hole.
2. Use the included clamshell bracket to secure.

SCM-ZC-LC LIGHTING CONTROLLER INSTALLATION
Central mounting locations under the helm or in the bilges are acceptable.

1. Orient the cable glands facing down or to the side so that they do not collect water.
2. Cinch cable glands as tightly as possible and fill unused glands so that the box is water tight.
3. Use the included four 8 x ¾” SS pan head screws for mounting.

SELECTING RGB OR RGBW LIGHTING
Set the RGB(W) dip switch within the SCM-MZ-LC, depending on whether a zone is using RGB or RGBW lighting, from left to right, as follows:

POWER REQUIREMENTS
See the Shadow-Caster® wire awg recommendations for detailed calculations. It is very important to have sufficient gauge wire feeds for RGB lighting. It is recommended to separate feeds for lighting and for sensitive stereo power feeds with direct runs to the battery or a heavy gauge distribution point. The SCM-MZ-LC will support 15 amps per zone. For a total of 60 amps in the entire box. The SCM-MZ-LC comes with 10 amp fuses installed. The SCM-MZ-LC will work in 12V or 24V systems. Please note that 12V or 24 compatible RGB(W) products should be used depending on the application.
RECOMMENDED WIRE GAUGES
Scan the QR Code below or click here to view our recommended wire gauge chart.

ADDING ADDITIONAL REMOTES AND  MULTI-FUNCTION DISPLAYS
Additional SCM-ZC-REMOTES or a Multi-Function Display (MFD) can be added to your installation with our Y-cable and 1m, 2m & 4m extension cables. See Optional Parts section on page 7 for details.

SHADOW-NET® DEVICES
Connect Shadow-NET® enabled devices to the orange and yellow Shadow-NET® wires coming from the MultiZone Lighting Controller.As soon as the Multi-Zone Lighting Controller receives power, multiple channels of digital messages start broadcasting on these wires. These messages allow Shadow-NET® enabled devices to be connected without a switch. Initially these commands instruct the attached lights to turn off. As soon as a command is given to the Multi- Zone Lighting Controller to go to color, these attached devices will receive a message to go to the corresponding color and brightness. Please note that different products are pre-programmed to respond to a certain channel. For example, Underwater Lights respond to Zone 1, Down Lights respond to Zone 2 and Spreader Lights respond to Zone 3.

OPTIONAL PARTS

• SCM-ZC-REMOTE
  Additional Remote (SCM-ZC-REMOTE)

• SCM-MFD-BRIDGE-STANDARD
  MFD-Bridge for connection to Multi-Function Display

• SCM-SCNET-01 1 meter Cable

• SCM-SCNET-02 2-meter Cable

• SCM-SCNET-04 4-meter Cable

• SCM-SCNET-Y Y Cable

BEST PRACTICES FOR MITIGATING NOISE ISSUES
Noise interface is common in systems with RGB lighting controls and amplified stereo systems. The advanced circuitry in the lighting controller does everything possible to protect from this. Utilizing installation best practices will further mitigate these issues.

1. Make sure to supply ample gauge power and separate distribution for stereo power and RGB power.
2. Run RGB power wires separately and as far as possible from the speaker feeds for the stereo. Run separate bundles where possible.

CONNECTING STEREO INPUT FOR STEREO MUSIC SYNC INPUT

TROUBLESHOOTING

MUSIC SYNC NOT WORKING
Verify that an appropriate 3.5mm stereo jack is being used and that there is a usable signal. If a separate output zone is used, verify that the outputis enabled and the output is set to a usable volume. It is not recommended to use a subwoofer output, as certain sync modes require the full audio range.
SCM-MZ-LC NOT LIGHTING UP
When power is first applied to the lighting controller, the box will flash blue very briefly. Once it receives a valid control input from a connected controller it will stay blue continuously. If it is not lighting up please double-check for correct orientation and reseat the SC-NET cable.
MY SHADOW-NET® LIGHTS STAY ON
If the connected Shadow-NET® lights are not turning off at initial power up then there is a challenge with the Shadow-NET® connection. Reset the power to the entire controller and lighting system. The Shadow-NET® bus connections will stop broadcasting if issues are detected, such as making connections when the power is on. Check the orange and yellow wire connections are not reversed and are fully connected.

OPERATION GUIDE

The Shadow-Caster Lighting Controller Remote (SCM-ZC-REMOTE) provides individual or simultaneous control of 4 independent lighting zones when connected to the Multi-Zone Lighting Controller (SCM-ZC-SA). This Controller Remote will only work in conjunction with the Lighting controller and not as a standalone unit. With the tactile keypad remote users can quickly change colors, brightness and lighting effects such as multicolor fade, and music synchronization. The Shadow-Caster Lighting Controller Remote (SCM-ZC-REMOTE) is a simple tactile way to control your Shadow-Caster Multi-Zone Lighting Controller (SCM-ZC-SA). Note, the SCM-ZC-SA is required in order to control your lights. The SCM-ZC-SA currently supports 4 analog RGB zones as well as any Shadow-Net enabled devices. When using with optional Shadow-Net devices, Underwater lights will respond to zone 1 commands (SCR-24-CC), and Down Lights (SCM-DL-CC) will respond to zone 2 commands.

GETTING TO KNOW YOUR REMOTE

Applying Adjustments
To make adjustments to a specific zone, press the zone number, then make the desired adjustments. To apply to all zones, click the “ALL” button instead of a zone number. 1234 ALL
Adjust Brightness
Select the desired zone(s) and use the O G buttons Example: 2 then O O O O turns Zone 2 down by 4 steps.
Turning Zones Off
Select the desired zone(s) and press CD Example: 1 then OFF turns Zone 1 off.

HOW TO OPERATE

All Press twice to turn all zones on Zone (1-4) Press and then set desired color and effect for the zone
Mode Press to step through modes: Single Color Fade / Multi-Color Fade / Multi-Color Change / Strobe
Sync Press to step through sync options: Full Spectrum Music Sync / Color Rotate Music Sync / Single Color Music Sync Click here to view our ‘Zone Controller Operations Guide’ for full instructions.

RECOMMENDED WIRE GAUGES devices
Scan the QR Code or click here to view our recommended wire gauge chart.

DESCRIPTION
Control all of your boat or recreational vehicle’s RGB lighting with Shadow- Caster®’s easy-to-use multi-zone push-button lighting controller. Our unique system provides 4 independent zones of color, brightness, multiple fade, strobe and music sync modes. The waterproof backlit controller can be mounted conveniently at your helm for quick and easy access.

FEATURES

• Easy to use, tactile push button interface
• No extra power switches are required. Our system will control all on/off power requirements for the lighting including optional Shadow-Net® lights
• Dimmable backlights
• Compatible with all standard RGB or RGBW lighting
• Control unique color and brightness for each zone
• Control speed and color sequence for multiple fades and strobe modes
• 3 versions of music synchronization
• Visual indication backlight to indicate zone color

SPECIFICATIONS

• 4 individually fused 15 amp RGBW lighting connections
• Compatible with 12/24 volt systems
• 3.5mm female audio connection for music sync input
• IP65 washdown rated enclosure
• Round controller size: 3.6” (92mm) OD x 0.5” (13mm) height, mounting hole size 3” (76mm)
• UV stabilized polycarbonate housing with stainless steel bezel
• Machined aluminum rear housing
• 16 Illuminated buttons

INCLUDES

• Multi-Zone Lighting Controller (SCM-MZ-LC)
• Round Zone Controller Remote (SCM-ZC-REMOTE)
• Mounting hardware
• 1-meter Shadow-NET® communication cable PN: SCM-CNET-01
• Quick start guide
• Standard 2-year warranty

Designed & Manufactured
in Clearwater, FL © 2020 Shadow-Caster ® LEDs. All Right Reserved.

Shadow-Caster® LED Lighting | 2060 Calumet Street | Clearwater, FL 33765
p: +1 727.474.2877 e: [email protected] w: shadow-caster.com

References

• Trending | Caster.com
• LED Lighting for Boats & Yachts | Shadow-Caster

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>