HEANTLE A2-BF WiFi Smart Lock Front Door User Manual

HEANTLE A2-BF WiFi Smart Lock Front Door

Read the user manual before use and keep it for further reference.

Scan me

Using the App

1. Create an Account
   • Android: Search Smart Life on Google Play. iOS: Search Smart Life on the App Store.
   • Sign up and log into your account with an email address.
2. Pair Your Phone with the Smart Lock
   • Step 1: Press any key to wake up the lock first, then tap Add Device. Step 2: Add the lock discovered.
   • Step 3: Name the lock and Tap Done.
3. Choose the Door Opening Direction
   • Settings➔Motor Direction➔Choose Left I Right
   • Face the door from the outside.
   • If the hinge is on the left, your door is left-handed.
   • If the hinge is on the right, the door is right-handed.
4. Change the Admin Passcode
   • Once the lock and your phone are paired, the default admin passcode 123456 is invalid.
   • Tap Member Management➔Admin➔Add Code➔Enter a 6-8 digit password and set a code name.
5. APP Homepage Overview

Temporary Code

**Time-Limited| Use it at least once within 24 hours after it takes effect. Otherwise, it becomes invalid.
---|---
****One- Time**| Validity period: 6 hours.

It can be used only once before it expires.

**Dynamic| Validity period: 5 minutes. It can be used multiple times before it expires.
****Clearing| Choose to clear one/ all used time-limited codes. Validity period: 24 hours. Once entered on the lock, one/all used time-limited codes are cleared.
****Custom**| To set/generate a custom code, your phone must be within 5 meters of the lock if not paired with the gateway.

Note: Please remember the temporary codes you set, as temporary passwords cannot be checked once they have been set.

Set Fingerprints (up to 50)

Tap Member Management➔Admin➔Add Fingerprint➔Follow the on-screen instructions to add a fingerprint.

For the lock to better recognize your fingerprints:

1. Make sure the fingerprint sensor and your finger are clean and dry.
2. Place your finger on the fingerprint sensor. Move your finger around to capture different parts of it.

Auto Lock & Remote Unlock

• Settings➔Auto Lock Delay (Change the interval from Ss-30min as needed)
• Settings➔Remote Unlock (Gateway Required)

Add Member

• The homeowner taps Me➔Home Management Home➔Add Member➔Tap Copy/Messages➔Send the invitation code to the recipient.
• The recipient taps Me➔Home Management a Home and enters the invitation code.
• Once the recipient is a home member, you can change the family role of the recipient.
• Common member: use a device, use a smart setting.
• Administrator: Manage device and room, manage smart settings, manage members.

Smart Home Integration

Enable the Gateway

• For remote control, add the lock to the App first, and then proceed with the steps below.
• Step 1: Plug in the gateway, the blue indicator remains solid and the red indicator flashes slowly.
• (If not, press and hold the reset button of the gateway for about 10 seconds until the blue indicator remains solid and the red indicator flashes slowly.)
• Step 2: Add the Gateway to the App (Pie 1-5). Once the Gateway is successfully added, the red indicator of the Gateway stops flashing and remains solid.
• Step 3: Pair the gateway with your smart lock (Pie 6-9).

Notes:

1. Only supporting a 2.4GHz WiFi network, the Gateway enables you to remotely control your lock via the Smart Life App.
2. For best performance, place the Gateway within 5m/16ft from the smart lock and router.

• Note: If you ignored the step 3, you can follow the steps below.
• Find the gateway on the homepage of the Smart Life App➔Tap Gateway➔Add device➔Add existing➔Choose your smart lock➔Wait for the gateway to establish a connection with the smart lock.

Enabling Amazon Alexa (Gateway Required)

• Step 1: Ensure that the lock and gateway are paired, then enable Remote Unlock in the lock Settings.
• Step 2: Tap Me➔Alexa, then follow the on-screen instructions to complete the setup.
• Step 3: Enable Unlock by App and Unlock by voice in the Alexa App
• Tap Locks➔Select your lock➔Tap the Settings icon➔Enable Unlock by App and Unlock by voice.

Enabling Google Home (Gateway Required)

• Step 1: Pair the Gateway with the lock first, then enable Remote Voice Unlock and set a 4-6 digit security code.
• Google will ask you for this security code when you unlock your door using voice commands.
• Step 2: Tap Google Assistant, then follow the on-screen instructions to complete the setup.

Smart Locks Table

Customer Service

• All HEANTLE products come with lifetime support.
• Feel free to contact us if you have any questions.
• Toll-free : 1-888-223-6660
• Mon-Sun : 12 pm-8 pm, 9 pm-6 am(EDT) Email: heantle@hotmail.com

Documents / Resources

| HEANTLE A2-BF WiFi Smart Lock Front Door [pdf] User Manual
B0CP983CN7, B0BF4TZHFC, B0CNCYBYQV, B0CN4C1VRF, A2-BF, A2-BF WiFi Smart Lock Front Door, WiFi Smart Lock Front Door, Smart Lock Front Door, Lock Front Door, Door
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>