milwaukee M18 TAL M18 Tradesman Area Light Instructions

June 4, 2024
Milwaukee

milwaukee M18 TAL M18 Tradesman Area Light Instructions

Inductions

Remove the battery pack before starting any work on the machine.

TECHNICAL DATA

Lighting time with one fully charged battery (5.0 Ah) area mode

  • Mode 3 High Level: 4 h
  • Mode 2 MedLevel: 8 h
  • Mode 1 Low Level: 16 h

Lighting time with one fully charged battery (5.0 Ah) flood mode

  • Mode 3 High Level: 6h
  • Mode 2 Med Level: 12h
  • Mode 1 Low Level: 24

Luminous flux area mode

  • High Level: 2200 lm
  • Med Level: 1100 lm
  • Low Level: 550 lm

Luminous flux flood mode

  • High Level: 1000 lm
  • Med Level: 500 lm
  • Low Level: 250 lm

Colour rendering index (CRI)

  • area mode:  70
  • flood mode: 80
  • Colour temperature: 4000 K
  • Battery voltage: 18 V
  • Rated Power Input: 23,4 W
  • Weight without battery: 1,8 kg
  • Weight according EPTA-Procedure 01/2014 (3.0 … 6.0 Ah) : 2,5 kg
  • Weight according EPTA-Procedure 01/2014 (9.0 Ah): 2,9 kg
  • Recommended ambient operating temperature: -18 … +50 °C
  • Recommended battery types: M18B
  • Recommended charger: M12-18C, M12-18AC, M12-18FC, M1418C6

WARNING Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fi re and/or serious injury.
Save all warnings and instructions for future reference.

SAFETY INSTRUCTIONS

Remove the battery pack before starting any work on the appliance.

Do not dispose of used battery packs in the household refuse or by burning them. Milwaukee Distributors off er to retrieve old batteries to protect our environment.

Do not store the battery pack together with metal objects (short circuit risk).
Use only compatible Milwaukee chargers from the same battery platform for charging battery packs. Do not use battery packs from other systems.

Battery acid may leak from damaged batteries under extreme load or extreme temperatures. In case of contact with battery acid wash it off immediately with soap and water. In case of eye contact rinse thoroughly for at least 10 minutes and immediately seek medical attention.

Warning: Do not direct the light beam at persons or animals and do not stare into the light beam yourself (not even from a distance). Staring into the light beam may result in serious injury or vision loss.

The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person.

Warning! To reduce the risk of fi re, personal injury, and product damage due to a short circuit, never immerse your tool, battery pack or charger in fluid or allow a fluid to flow inside them. Corrosive or conductive fluids, such as seawater, certain industrial chemicals, and bleach or bleach containing products, etc., can cause a short circuit.

SPECIFIED CONDITIONS OF USE

The Battery-lamp is intended to be used light independent use away from mains supply.
Do not use this product in any other way as stated for normal use.

BATTERIES

Battery packs which have not been used for some time should be recharged before use.
Temperatures in excess of 50°C (122°F) reduce the performance of the battery pack. Avoid extended exposure to heat or sunshine (risk of overheating).
The contacts of chargers and battery packs must be kept clean.
For an optimum life-time, the battery packs have to be fully charged, after used.
To obtain the longest possible battery life remove the battery pack from the charger once it is fully charged.
For battery pack storage longer than 30 days:
Store the battery pack where the temperature is below 27°C and away from moisture
Store the battery packs in a 30% – 50% charged condition
Every six months of storage, charge the pack as normal.

TRANSPORTING LITHIUM BATTERIES

Lithium-ion batteries are subject to the Dangerous Goods Legislation requirements.
Transportation of those batteries has to be done in accordance with local, national and international provisions and regulations.

  • The user can transport the batteries by road without further requirements.
  • Commercial transport of Lithium-Ion batteries by third parties is subject to Dangerous Goods regulations. Transport preparation and transport are exclusively to be carried out by appropriately trained persons and the process has to be accompanied by corresponding experts.

When transporting batteries:

  • Ensure that battery contact terminals are protected and insulated to prevent short circuit.
  • Ensure that battery pack is secured against movement within packaging.
  • Do not transport batteries that are cracked or leak.
    Check with forwarding company for further advice.

MAINTENANCE

The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person.
Use only Milwaukee accessories and spare parts. Should components need to be replaced which have not been described, please contact one of our Milwaukee service agents (see our list of guarantee/service addresses).
If needed, an exploded view of the tool can be ordered.
Please state the machine type printed as well as the six-digit
No. on the label and order the drawing at your local service agents or directly at: Techtronic Industries GmbH, Max-Eyth-Straße 10, 71364 Winnenden, Germany.

SYMBOLS

  • CAUTION! WARNING! DANGER!

  • Please read the instructions carefully before starting the machine.

  • Do not stare at the operating light source.

  • Safety class III.

  • This tool is only suitable for indoor use. Never expose tool to rain.

  • Do not dispose electric tools, batteries/ rechargeable batteries together with household waste material.
    Electric tools and batteries that have reached the end of their life must be collected separately and returned to an environmentally compatible recycling facility.
    Check with your local authority or retailer for recycling advice and collection point.

  • European Conformity Mark

  • British Confomity Mark

  • Ukraine Conformity Mark

  • EurAsian Conformity Mark

Support

Copyright 2020
Techtronic Industries GmbH
Max-Eyth-Str. 10
71364 Winnenden
Germany
+49 (0) 7195-12-0
www.milwaukeetool.eu

Techtronic Industries (UK) Ltd
Fieldhouse Lane
Marlow Bucks SL7 1HZ
UK

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals