AOC C32G2AE LCD Monitor User Manual

AOC C32G2AE LCD Monitor User Manual

Safety

National Conventions

The following subsections describe notational conventions used in this document.

Notes, Cautions, and Warnings

Throughout this guide, blocks of text may be accompanied by an icon and printed in bold type or in italic type. These blocks are notes, cautions, and warnings, and they are used as follows:

NOTE: A NOTE indicates important information that helps you make better use of your computer system.

CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem.

WARNING: A WARNING indicates the potential for bodily harm and tells you how to avoid the problem. Some warnings may appear in alternate formats and may be unaccompanied by an icon. In such cases, the specific presentation of the warning is mandated by regulatory authority

Power

The monitor should be operated only from the type of power source indicated on the label. If you are not sure of the type of power supplied to your home, consult your dealer or local power company.

The monitor is equipped with a three-pronged grounded plug, a plug with a third (grounding) pin. This plug will fit only into a grounded power outlet as a safety feature. If your outlet does not accommodate the three-wire plug, have an electrician install the correct outlet, or use an adapter to ground the appliance safely. Do not defeat the safety purpose of the grounded plug.

Unplug the unit during a lightning storm or when it will not be used for long periods of time. This will protect the monitor from damage due to power surges.

Do not overload power strips and extension cords. Overloading can result in fire or electric shock.

To ensure satisfactory operation, use the monitor only with UL listed computers which have appropriate configured receptacles marked between 100-240V AC, Min. 5A.

The wall socket shall be installed near the equipment and shall be easily accessible.

Installation

Do not place the monitor on an unstable cart, stand, tripod, bracket, or table. If the monitor falls, it can injure a person and cause serious damage to this product. Use only a cart, stand, tripod, bracket, or table recommended by the manufacturer or sold with this product. Follow the manufacturer’s instructions when installing the product and use mounting accessories recommended by the manufacturer. A product and cart combination should be moved with care.

Never push any object into the slot on the monitor cabinet. It could damage circuit parts causing a fire or electric shock. Never spill liquids on the monitor.

Do not place the front of the product on the floor.

 If you mount the monitor on a wall or shelf, use a mounting kit approved by the manufacturer and follow the kit instructions.

Leave some space around the monitor as shown below. Otherwise, air-circulation may be inadequate hence overheating may cause a fire or damage to the monitor.

See below the recommended ventilation areas around the monitor when the monitor is installed on the wall or on the stand:

Installed with stand

Cleaning

Clean the cabinet regularly with cloth. You can use soft-detergent to wipe out the stain, instead of strong-detergent which will cauterize the product cabinet.

When cleaning, make sure no detergent is leaked into the product. The cleaning cloth should not be too rough as it will scratch the screen surface.

Please disconnect the power cord before cleaning the product.

Other

If the product is emitting a strange smell, sound or smoke, disconnect the power plug IMMEDIATELY and contact a Service Center.

Make sure that the ventilating openings are not blocked by a table or curtain.

Do not engage the LCD monitor in severe vibration or high impact conditions during operation.

Do not knock or drop the monitor during operation or transportation.

Setup

Contents in Box

Not all signal cables will be provided for all countries and regions. Please check with the local dealer or AOC branch office for confirmation.

Setup Stand & Base

Please setup or remove the base following the steps as below.

Setup:

Remove:

Adjusting Viewing Angle

For optimal viewing it is recommended to look at the full face of the monitor, then adjust the monitor’s angle to your own preference. Hold the stand so you will not topple the monitor when you change the monitor’s angle.

You are able to adjust the monitor as below:

NOTE:
Do not touch the LCD screen when you change the angle. It may cause damage or break the LCD screen.

Connecting the Monitor

Cable Connections In Back of Monitor and Computer:

1. HDMI-2
2. HDMI-1
3. DisplayPort
4. D-SUB
5. Audio in
6. Earphone
7. Power

Connect to PC

1. Connect the power cord to the back of the display firmly.
2. Turn off your computer and unplug its power cable.
3. Connect the display signal cable to the video connector on the back of your computer.
4. Plug the power cord of your computer and your display into a nearby outlet.
5. Turn on your computer and display.
   If your monitor displays an image, installation is complete. If it does not display an image, please refer Troubleshooting.
   To protect equipment, always turn off the PC and LCD monitor before connecting.

Adaptive-Sync function

1. Adaptive-Sync function is working with DP/HDMI
2. Compatible Graphics Card: Recommend list is as the below, also could be checked by visiting www.AMD.com
3. Radeon™ RX Vega series
4. Radeon™ RX 500 series
5. Radeon™ RX 400 series
6. Radeon™ R9/R7 300 series （R9 370/X, R7 370/X, R7 265 except）
7. Radeon™ Pro Duo (2016)
8. Radeon™ R9 Nano series
9. Radeon™ R9 Fury series
10. Radeon™ R9/R7 200 series (R9 270/X, R9 280/X except)

Adjusting

Hotkeys

Menu/Enter
Press to display the OSD or confirm the selection.

Power
Press the Power button to turn on the monitor.

Dial Point
When there is no OSD, press Dial Point button to show / hide Dial Point.

Game Mode
When there is no OSD, press “ ” key to open game mode function, then press “ ” or “ ” key to select game mode (FPS, RTS, Racing, Gamer 1, Gamer 2 or Gamer 3) basing on the different game types.

Source/Auto/Exit
When the OSD is closed, press Source/Auto/Exit button will be Source hot key function. When the OSD is closed, press Source/Auto/Exit button continuously about 2 second to do auto configure (Only for the models with D-Sub).

OSD Setting

Basic and simple instruction on the control keys.

1. Press the MENU-button to activate the OSD window.
2. Press Left or Right to navigate through the functions. Once the desired function is highlighted, press the MENU-button to activate it, press Left or Right to navigate through the sub-menu functions. Once the desired function is highlighted, press MENU-button to activate it.
3. Press Left or to change the settings of the selected function. Press to exit. If you want to adjust any other function, repeat steps 2-3.
4. OSD Lock Function: To lock the OSD, press and hold the MENU-button while the monitor is off and then press power button to turn the monitor on. To un-lock the OSD – press and hold the MENU-button while the monitor is off and then press power button to turn the monitor on.

Notes:

1. If the product has only one signal input, the item of “Input Select” is disable to adjust.
2. ECO modes (except Standard mode), DCR, DCB mode and Picture Boost, for these four states that only one state can exist.

Luminance

| Contrast| 0-100| Contrast from Digital-register.
---|---|---|---
Brightness| 0-100| Backlight Adjustment
Eco mode| Standard| | Standard Mode
Text| | Text Mode
Internet| | Internet Mode
Game| | Game Mode
Movie| | Movie Mode
Sports| | Sports Mode
Reading| | Reading Mode
Gamma| Gamma1| Adjust to Gamma 1
Gamma2| Adjust to Gamma 2
Gamma3| Adjust to Gamma 3
DCR| Off| | Disable dynamic contrast ratio
On| | Enable dynamic contrast ratio
HDR Mode| Off| | Select HDR Mode.
HDR Picture|
HDR Movie|
HDR Game|

Note:
When “HDR Mode” is set to “non-off”, the items “Contrast”, “Brightness”, “Gamma” cannot be adjusted.

Image Setup

| Clock| 0-100| Adjust picture Clock to reduce Vertical-Line noise.
---|---|---|---
Phase| 0-100| Adjust Picture Phase to reduce Horizontal-Line noise
Sharpness| 0-100| Adjust picture sharpness
H. Position| 0-100| Adjust the horizontal position of the picture.
V. Position| 0-100| Adjust the vertical position of the picture.

Color Setup

| **** Color Temp.| Warm| | Recall Warm Color Temperature from EEPROM.
---|---|---|---|---
Normal| | Recall Normal Color Temperature from EEPROM.
Cool| | Recall Cool Color Temperature from EEPROM.
sRGB| | Recall SRGB Color Temperature from EEPROM.
User| | Restore Color Temperature from EEPROM.
**** DCB Mode| Full Enhance| On or Off| Disable or Enable Full Enhance Mode
Nature Skin| On or Off| Disable or Enable Nature Skin Mode
Green Field| On or Off| Disable or Enable Green Field Mode
Sky-blue| On or Off| Disable or Enable Sky-blue Mode
AutoDetect| On or Off| Disable or Enable AutoDetect Mode
DCB Demo| | On or Off| Disable or Enable Demo
Red| | 0-100| Red gain from Digital-register.
Green| | 0-100| Green gain from Digital-register.
Blue| | 0-100| Blue gain from Digital-register.

Note:
When “HDR Mode” under “Luminance” is set to “non-off”, all items under “Color Setup” cannot be adjusted.

Picture Boost

| Bright Frame| on or off| Disable or Enable Bright Frame
---|---|---|---
Frame Size| 14-100| Adjust Frame Size
Brightness| 0-100| Adjust Frame Brightness
Contrast| 0-100| Adjust Frame Contrast
H. position| 0-100| Adjust Frame horizontal Position
V. position| 0-100| Adjust Frame vertical Position

Note:

Adjust the brightness, contrast, and position of the Bright Frame for better viewing experience.

When “HDR Mode” under “Luminance” is set to “non-off”, all items under “Picture Boost” cannot be adjusted.

  OSD Setup

| Language| | Select the OSD language
---|---|---|---
Timeout| 5-120| Adjust the OSD Timeout
**** DP Capability| **** 1.1/1.2| If the DP video content supports DP1.2, please selectDP1.2 for DP Capability; otherwise, please select DP1.1.Please be noted that only DP1.2 support Adaptive-Sync function
H. Position| 0-100| Adjust the horizontal position of OSD
V. Position| 0-100| Adjust the vertical position of OSD
Volume| 0-100| Volume Adjustment.
Transparence| 0-100| Adjust the transparence of OSD
Break Reminder| on or off| Break reminder if the user continuously work for more than 1hrs
Frame Counter| Off / Right-up/ Right-Down / Left-Down / Left- Up| Display V frequency on the corner selected

Game Setting

| Game Mode| FPS| For playing FPS (first Person Shooters) games.Improves dark theme black level details.
---|---|---|---
RTS| For playing RTS (Real Time Strategy). Improves the image quality.
Racing| For playing Racing games, Provides fastest response time and high color saturation.
Gamer 1| User’s preference settings saved as Gamer 1.
Gamer 2| User’s preference settings saved as Gamer 2.
Gamer 3| User’s preference settings saved as Gamer 3.
Off| No optimization by Smart image game
Shadow Control| **** 0-100| Shadow Control Default is 50, then end-user can adjustfrom 50 to 100 or 0 to increase contrast for clear picture.1.     If picture is too dark to be saw the detail clearly, adjusting from 50 to100 for clear picture.2.     If picture is too white to be saw the detail clearly,adjusting from 50 to0 for clear picture
Game Color| 0-20| Game Color will provide 0-20 level for adjustingsaturation to get better picture.
Low Blue Mode| Reading / Office/ Internet /Multimedia / Off| Decrease blue light wave by controlling color temperature.
Low Input Lag| On/Off| Turn off frame buffer to decrease input lag
**** Overdrive| Weak| Adjust the response time.
Medium
Strong
Boost
Off
MBR| 0 ~ 20| Adjust the Motion Blur Reduction.
Adaptive-Sync| on or off| Disable or Enable Adaptive-Sync .Adaptive-Sync Run Reminder: When the Adaptive-Sync feature is enabled, there may be flashing in some game environments.

Note:

1. The function MBR and Overdrive Boost are available only when Adaptive-Sync is off and the vertical frequency is up to 75 Hz.
2. The screen brightness will be reduced when adjusting MBR or Over driver setting to Boost.
3. When “HDR Mode” under “Luminance” is set to “non-off”, the items “Game Mode”, “Shadow Control”, “Game Color”, “Low Blue Mode” cannot be adjusted.

Extra

| Input Select| | Select Input Signal Source
---|---|---|---
Auto Config.| Yes or No| Auto adjust the picture to default
Off timer| 0-24hrs| Select DC off time
Image Ratio| Wide| Select image ratio for display.
4:3
1:1
17” (4:3)
19” (4:3)
19” (5:4)
19”W (16:10)
21.5”W (16:9)
22”W (16:10)
23”W (16:9)
23.6”W (16:9)
24”W (16:9)
27”W (16:9)
DDC/CI| Yes or No| Turn ON/OFF DDC/CI Support
Reset| Yes or No| Reset the menu to default

Exit

| **** Exit| | **** Exit the main OSD
---|---|---|---

LED Indicator

Troubleshoot

properly connected to a grounded power outlet and to the monitor.
No images on the screen|

• Is the power cord connected properly? Check the power cord connection and power supply.
• Is the cable connected correctly?(Connected using the VGA cable) Check the VGA cable connection. (Connected using the HDMI cable) Check the HDMI cable connection. (Connected using the DP cable) Check the DP cable connection.* VGA/HDMI/DP input is not available on every model.If the power is on, reboot the computer to see the initial screen (the login screen), which can be seen. If the initial screen (the login screen) appears, boot the computer in the applicable mode (the safe mode for Windows 7/8/10) and then change the frequency of the video card.(Refer to the Setting the Optimal Resolution)If the initial screen (the login screen) does not appear, contact the Service Center or your dealer.
• Can you see “Input Not Supported” on the screen?You can see this message when the signal from the video card exceeds the maximum resolution and frequency that the monitor can handle properly.Adjust the maximum resolution and frequency that the monitor can handle properly.
• Make sure the AOC Monitor Drivers are installed.

Picture Is Fuzzy & Has Ghosting Shadowing Problem| Adjust the Contrast and Brightness Controls. Press to auto adjust.Make sure you are not using an extension cable or switch box. We recommend plugging the monitor directly to the video card output connector on the back.
Picture Bounces, Flickers Or Wave Pattern Appears In The Picture| Move electrical devices that may cause electrical interference as far away from themonitor as possible.Use the maximum refresh rate your monitor is capable of at the resolution you are using.
Monitor Is Stuck In Active Off-Mode”| The Computer Power Switch should be in the ON position.The Computer Video Card should be snugly fitted in its slot.Make sure the monitor’s video cable is properly connected to the computer. Inspect the monitor’s video cable and make sure no pin is bent.Make sure your computer is operational by hitting the CAPS LOCK key on the keyboard while observing the CAPS LOCK LED. The LED should either turn ON or OFF after hitting the CAPS LOCK key.
Missing one of the primary colors (RED, GREEN, or BLUE)| Inspect the monitor’s video cable and make sure that no pin is damaged. Make sure the monitor’s video cable is properly connected to the computer.
Screen image is not centered or sized properly| Adjust H-Position and V-Position or press hot-key (AUTO).
Picture has color defects (white does not look white)| Adjust RGB color or select desired color temperature.
Horizontal or vertical disturbances on the screen| Use Windows 7/8/10 shut-down mode to adjust CLOCK and FOCUS. Press to auto-adjust.
 Regulation & Service| Please refer to Regulation & Service Information which is in the CD manual or www.aoc.com (to find the model you purchase in your country and to find Regulation & Service Information in Support page.

Specification

General Specification

Preset Display Modes

STANDARD| RESOLUTION| HORIZONTAL FREQUENCY(kHz)| VERTICAL FREQUENCY(Hz)
---|---|---|---
VGA| 640×480@60Hz| 31.469| 59.94
VGA| 640×480@67Hz| 35| 66.667
VGA| 640×480@72Hz| 37.861| 72.809
VGA| 640×480@75Hz| 37.5| 75
VGA| 640×480@100Hz| 51.08| 99.769
VGA| 640×480@120Hz| 61.91| 119.518
DOS MODE| 720×400@70Hz| 31.469| 70.087
DOS MODE| 720×480@60Hz| 29.855| 59.710
SD| 720×576@50Hz| 31.25| 50
SVGA| 800×600@56Hz| 35.156| 56.25
SVGA| 800×600@60Hz| 37.879| 60.317
SVGA| 800×600@72Hz| 48.077| 72.188
SVGA| 800×600@75Hz| 46.875| 75
SVGA| 800×600@100Hz| 63.684| 99.662
SVGA| 800×600@120Hz| 76.302| 119.97
SVGA| 832×624@75Hz| 49.725| 74.551
XGA| 1024×768@60Hz| 48.363| 60.004
XGA| 1024×768@70Hz| 56.476| 70.069
XGA| 1024×768@75Hz| 60.023| 75.029
XGA| 1024×768@100Hz| 81.577| 99.972
XGA| 1024×768@120Hz| 97.551| 119.989
WXGA+| 1440×900@60Hz| 55.935| 59.887
SXGA| 1280×1024@60Hz| 63.981| 60.02
SXGA| 1280×1024@75Hz| 79.975| 75.025
HD| 1280×720@50Hz| 37.071| 49.827
HD| 1280×720@60Hz| 45| 60
HD| 1280×1080@60Hz| 67.173| 59.976
CVT| 1680×1050@60Hz| 64.674| 59.883
Full HD| 1920×1080@60Hz| 67.5| 60
Full HD| 1920×1080@100Hz| 113.21| 99.93
Full HD| 1920×1080@120Hz| 137.26| 119.982
Full HD| 1920×1080@144Hz| 158.1| 144
Full HD| 1920×1080@165Hz| 183.154| 165

Pin Assignments

Pin No.| Signal Name| Pin No.| Signal Name| Pin No.| Signal Name
---|---|---|---|---|---
1.| TMDS Data 2+| 9.| TMDS Data 0-| 17.| DDC/CEC Ground
2.| TMDS Data 2 Shield| 10.| TMDS Clock +| 18.| +5V Power
3.| TMDS Data 2-| 11.| TMDS Clock Shield| 19.| Hot Plug Detect
4.| TMDS Data 1+| 12.| TMDS Clock-| |
5.| TMDS Data 1Shield| 13.| CEC| |
6.| TMDS Data 1-| 14.| Reserved (N.C. on device)| |
7.| TMDS Data 0+| 15.| SCL| |
8.| TMDS Data 0 Shield| 16.| SDA| |

20-Pin Color Display Signal Cable
Pin No.| Signal Name| Pin No.| Signal Name
---|---|---|---
1| ML_Lane 3 (n)| 11| GND
2| GND| 12| ML_Lane 0 (p)
3| ML_Lane 3 (p)| 13| CONFIG1
4| ML_Lane 2 (n)| 14| CONFIG2
5| GND| 15| AUX_CH(p)
6| ML_Lane 2 (p)| 16| GND
7| ML_Lane 1 (n)| 17| AUX_CH(n)
8| GND| 18| Hot Plug Detect
9| ML_Lane 1 (p)| 19| Return DP_PWR
10| ML_Lane 0 (n)| 20| DP_PWR

15-Pin Color Display Signal Cable

Plug and Play

Plug & Play DDC2B Feature

This monitor is equipped with VESA DDC2B capabilities according to the VESA DDC STANDARD. It allows the monitor to inform the host system of its identity and, depending on the level of DDC used, communicate additional information about its display capabilities.

The DDC2B is a bi-directional data channel based on the I2C protocol. The host can request EDID information over the DDC2B channel.

References

• Homepage | AOC Monitors
• Manual-Hub.com – Free PDF manuals!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>