aruba 7010 Controller MNT Kit Installation Guide
- June 17, 2024
- aruba
Table of Contents
7010 Controller MNT-KIT
Installation Guide
This document provides installation instructions for rack mounting and wall
mounting an Aruba 7010 controller.
This accessory kit includes hardware for mounting the controller on a wall and
in a two-post 19-inch Telco rack.
Package Contents
- Two Mount Bracket (used for rack or wall mounting)
- Eight M4 x 8 mm Phillips Flat Head Screws
- Four M6 x 15 mm Phillips Pan Head Screws
- 7010 Controller MNT-KIT Installation Guide (printed) (this document)
Rack Mounting- Standard
This mounting option allows mounting the 7010 controller in a two-post 19-inch
Telco rack.
Each 7010 controller should have its own mounting equipment. Do not place
other networking equipment directly on top of a mounted 7010 controller.
Failure to do so can damage the device.
Required Tools and Equipment
The following tools and equipment are required for installing a 7010
controller:
- Mounting Bracket (x2) (included in the kit): Do not use for table or shelf installation
- Screws for mounting bracket (x8): M4 x 8 mm Phillips Flat Head Screws (included in the kit)
- Screws for system rack mount (x4): M6 x 15 mm Phillips Pan Head Screws (included in the kit)
- Suitable Screwdrivers for all screw types provided in the box (not included in the kit)
Some racks require screws that differ from those included with the 7010 controller. Ensure that you have the correct screws before installing the 7010 controller.
Installation Steps
To install a 7010 controller into a two-post 19-inch Telco rack:
-
Place the mounting bracket over the mounting holes on the controller (see Figure 1).
-
Secure the bracket to the controller using the eight screws for the mount bracket (four per bracket) and a suitable screwdriver.
Figure 1 Attaching the Mount Brackets for Rack Mount -
Mount the controller within your organization’s rack system using the four screws for system rack mount (two per bracket) and a suitable screwdriver (see Figure 2).
Figure 2 Rack Mounting
Leave a minimum of 10 cm (4 inches) of space on the left and right side of the
controller for proper air flow and ventilation.
Leave additional space in the front and the back of the controller to access
network cables, LED status indicators, and power cord.
Wall Mounting
The mounting brackets can also be used for wall mounting the 7010 controller.
Required Tools and Equipment
The following tools and equipment are required for installing a 7010
controller on a wall:
- Mounting Brackets (x2) (included in the kit)
- Screws for mounting bracket (x8): M4 x 8 mm Phillips Flat Head Screws (included in the kit)
- Wall Anchors: Optional accessory (not included in the kit)
- Wall Mounting Screws: The type of screw depends on the installation surface (not included in the kit)
- Suitable Screwdrivers for all screw types (not included in the kit)
Installation Steps
To install a 7010 controller on a wall:
Ensure that the Ethernet ports are facing down when installing the 7010 controller on a wall.
-
Fasten the mounting brackets over the mounting holes on the sides of the 7010 controller using the eight screws for mounting bracket (four per bracket) and a suitable screwdriver (see Figure 3).
Figure 3 Attaching the Mount Brackets for Wall Mount
-
After you have chosen a mounting location, mark the locations on the wall where you intend to make mounting holes.
-
Create the holes and insert wall anchors if your installation requires them.
-
Align the mounting bracket holes with the holes you created in the wall (see Figure 4).
-
Use appropriate screws to secure the 7010 controller.
Figure 4 Wall Mounting
Contacting Support
Table 1 Contact Information
| Main Site | arubanetworks.com |
|---|---|
| Support Site | support.arubanetworks.com |
| Airheads Social Forums and Knowledge Base |
community.arubanetworks.com
North American Telephone|
1-800-943-4526 (Toll Free)
1-408-754-1200
International Telephones| http://www.arubanetworks.com/support-services
/support-program/contact-support
Software Licensing Site|
licensing.arubanetworks.com
End of Support information| http://www.arubanetworks.com/support-services
/end-of-life-products/end-of-life-policy/
Security Incident Response Team (SIRT)| http://www.arubanetworks.com/support-
services/security-bulletins/
Support Email Addresses|
Americas, APAC, and EMEA|
support@arubanetworks.com
Security Incident Response Team (SIRT)|
sirt@arubanetworks.com
Copyright
© 2014 Aruba Networks, Inc. Aruba Networks trademarks include , Aruba
Networks®, Aruba Wireless Networks®, the registered Aruba the Mobile Edge
Company logo, Aruba Mobility Management System®, Mobile Edge Architecture®,
People Move. Networks Must Follow®, RFProtect®, Green Island®. All rights
reserved. All other trademarks are the property of their respective owners.
Open Source Code
Certain Aruba products include Open Source software code developed by third
parties, including software code subject to the GNU General Public License
(GPL), GNU Lesser General Public License (LGPL), or other Open Source
Licenses. Includes software from Litech Systems Design. The IF-MAP client
library copyright 2011 Infoblox, Inc. All rights reserved. This product
includes software developed by Lars Fenneberg et al. The Open Source code used
can be found at this site:
http://www.arubanetworks.com/open_source
Legal Notice
The use of Aruba Networks, Inc. switching platforms and software, by all
individuals or corporations, to terminate other vendors’ VPN client devices
constitutes complete acceptance of liability by that individual or corporation
for this action and indemnifies, in full, Aruba Networks, Inc. from any and
all legal actions that might be taken against it with respect to infringement
of copyright on behalf of those vendors.
Warranty
This hardware product is protected by an Aruba warranty. For details, see
Aruba Networks standard warranty terms and conditions.
© 2014 Aruba Networks, Inc. All rights
reserved.www.arubanetworks.com
1344 Crossman Avenue
Sunnyvale, California 94089
Phone: 408.227.4500
Fax 408.227.4550
7010 Controller MNT-KIT | Installation Guide
https://manual-hub.com/
References
- Home - Airheads Community
- Home
- Open Source | HPE Aruba Networking
- Contact Support | HPE Aruba Networking
- Manual-Hub.com – Free PDF manuals!
- Home
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>