IPRO WV-U1542LA Network Camera Instruction Manual

WV-U1542LA Network Camera
Instruction Manual
Model No.
WV-U1542LA/WV-U1532LA/WV-U2542LA/WV-U2532LA

About the user manuals

Product documentation is composed of the following documents.

• Installation Guide (accessory): Provides information about “Precautions”, “Precautions for installation” and the installation method.

• Basic Information (this document): Provides information about “Precautions for use” and “Detail specifications”.

• Operating Instructions (in the following manual website): Explains how to perform the settings and how to operate this camera.
  https://i-pro.com/global/en/surveillance/documentation_database
  “<Control No.: C****>” used in these documents should be used to search for information on our support website
  (https://i-pro.com/global/en/surveillance/training-support/support/technical- information) and will guide you to the right information.

• microSDXC/ microSDHC/ microSD memory card is described as a microSD memory card.

• The external appearance and other parts shown in this manual may differ from the actual product within the scope that will not interfere with normal use due to improvement of the product.

Limitation of liability

THIS PUBLICATION IS PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR ANY PARTICULAR PURPOSE, OR NON-INFRINGEMENT OF THE THIRD PARTY’S RIGHT.
THIS PUBLICATION COULD INCLUDE TECHNICAL INACCURACIES OR TYPOGRAPHICAL ERRORS. CHANGES ARE ADDED TO THE INFORMATION HEREIN, AT ANY TIME, FOR THE IMPROVEMENTS OF THIS PUBLICATION AND/OR THE CORRESPONDING PRODUCT (S).

Disclaimer of warranty

IN NO EVENT SHALL i-PRO Co., Ltd. BE LIABLE TO ANY PARTY OR ANY PERSON, EXCEPT FOR REPLACEMENT OR REASONABLE MAINTENANCE OF THE PRODUCT, FOR THE CASES, INCLUDING BUT NOT LIMITED TO BELOW:

1. ANY LOSS OR DAMAGE, INCLUDING WITHOUT LIMITATION, DIRECT OR INDIRECT, SPECIAL, CONSEQUENTIAL OR EXEMPLARY, ARISING OUT OF OR RELATING TO THE PRODUCT;
2. ANY INCONVENIENCE, LOSS, OR DAMAGE CAUSED BY INAPPROPRIATE USE OR NEGLIGENT OPERATION OF THE USER;
3. ALL MALFUNCTIONS OR TROUBLES FROM UNAUTHORIZED DISASSEMBLE, REPAIR OR MODIFICATION OF THE PRODUCT BY THE USER, REGARDLESS OF THE CAUSE OF THE MALFUNCTION OR TROUBLE;
4. INCONVENIENCE OR ANY LOSS ARISING WHEN IMAGES ARE NOT DISPLAYED, DUE TO ANY REASON OR CAUSE INCLUDING ANY FAILURE OR PROBLEM OF THE PRODUCT;
5. ANY PROBLEM, CONSEQUENTIAL INCONVENIENCE, OR LOSS OR DAMAGE, ARISING OUT OF THE SYSTEM COMBINED BY THE DEVICES OF THIRD PARTY;
6. ANY CLAIM OR ACTION FOR DAMAGES BROUGHT BY ANY PERSON OR ORGANIZATION AS A PHOTOGRAPHED SUBJECT DUE TO VIOLATION OF PRIVACY CONCERNING A SURVEILLANCE CAMERA’S PICTURE OR SAVED DATA, FOR SOME REASON (INCLUDING USE WHEN USER AUTHENTICATION ON THE AUTHENTICATION SETTING SCREEN IS SET TO OFF), BECOMING PUBLIC OR BEING USED FOR ANY PURPOSE;
7. LOSS OF REGISTERED DATA CAUSED BY ANY FAILURE (INCLUDING INITIALIZATION OF THE PRODUCT DUE TO FORGOTTEN AUTHENTICATION INFORMATION SUCH AS A USER NAME AND PASSWORD).

About notations

The following notations are used when describing the functions limited to specified models.
The functions without the notations are supported by all models.
U1542 The functions with this notation are available when using the model WV-U1542LA.
U1532 The functions with this notation are available when using the model WV-U1532LA.
U2542 The functions with this notation are available when using the model WV-U2542LA.
U2532 The functions with this notation are available when using the model WV-U2532LA.

System requirements for a PC

CPU:| Intel ® TM Core 1 Processor family * ® TM
– Intel Core i5-6500 or faster ® TM
– Intel Core i7-6700 or faster recommended
---|---
Memory:| 4 GB (2 GB x 2, Dual Channel) or more recommended.
Network interface:| 10BASE-T/100BASE-TX 1 port
Monitor:| Image capture size: 1024 x 768 pixels or more
High-resolution monitoring: 3840 x 2160 pixels or more U1542/U2542
Color: 24-bit True color or better
OS:| Microsoft Windows 10
Microsoft Windows 8.1
Web browser:| Internet Explorer 11 (32-bit)
Microsoft Edge
Firefox
Google chrome™
Others:| Adobe® Reader® or Acrobat Reader® (It is necessary to view the PDF file.)

*1 For details on using the hardware decode function, refer to our support website .
IMPORTANT:

• For information on the operation verification of the supported operating systems and web browsers, refer to our support website <Control No.: C0104, C0122>.
• When using a PC that does not meet the above requirements, displaying images may become slower or the web browser may become inoperable.
• When using Microsoft Windows 8.1, use it on the desktop. The software cannot be used in Modern UI design.

Network security

As you will use this unit connected to a network, your attention is called to the following security risks.

1. Leakage or theft of information through this unit
2. Use of this unit for illegal operations by persons with malicious intent
3. Interference with or stoppage of this unit by persons with malicious intent

It is your responsibility to take precautions such as those described below to protect yourself against the above network security risks.

• Use this unit in a network secured by a firewall, etc.
• If this unit is connected to a network that includes PCs, make sure that the system is not infected by computer viruses or other malicious entities (using a regularly updated anti-virus program, anti-spyware program, etc.).
• To prevent unauthorized access, use user authentication, set user names and passwords, and limit which users can log in.
• Apply measures such as user authentication to protect your network against leakage or theft of information, including image data, authentication information (user names and passwords), alarm mail information, and DDNS server information.
• After the unit is accessed by the administrator, make sure to close the browser.
• Change the administrator password periodically. Additionally, save user authentication information (user names and passwords) in such a way that it is kept out of the hands of third parties.
• Do not install the camera in locations where the camera or the cables can be destroyed or damaged by persons with malicious intent.

Precautions for use

When the product is accessible from the Internet
To prevent unauthorized access, note the following.

• Leave user authentication turned on.
• Periodically change passwords that are used to access the product.
  Refer to the Operating Instructions for information about how to change passwords.

To keep on using with stable performance
Do not use this product in hot and humid conditions for a long time. Failure to observe this causes component degradation resulting in the life-shortening of this product. Do not expose this product to direct heat sources such as a heater.
Turning the power supply ON and OFF frequently can lead to malfunctions.
Handle this product with care.
Do not drop this product, nor apply shock or vibration to the product. Failure to observe this may cause trouble.

U1542/U1532
Do not subject the front cover to strong impact.
Doing so may cause damage or immersion.
U2542/U2532
Do not subject dome cover to strong impact.
Doing so may cause damage or immersion.
U1542/U1532
Do not touch the front panel with your bare hands.
A dirty front panel causes deterioration of picture quality.
U2542/U2532
Do not touch the dome cover with your bare hands.
A dirty dome cover causes deterioration of picture quality.
When an error is detected, this product will restart automatically.
This product will be inoperable for around 2 minutes after the restart just as when the power is turned on.
About the automatic status detection function
When this product malfunctions due to exogenous noise, etc. for 30 seconds or more, the product will automatically reset and will return to its normal state. When the product is reset, initialization will be carried out when the power of the product is turned on. When the product repeatedly resets, the exogenous noise levels around the product may be high and that may cause malfunction. Contact your dealer for instructions.
Periodically images on the screen appear to be distorted
When the camera is installed in a location where it is subject to small vibrations (for example, when it is installed near devices that vibrate), images may appear distorted and stretched lengthways. This phenomenon is a characteristic of image-pickup devices that use CMOS sensors and is caused by the relationship between the periodic movements of the camera and the timing that the image sensor reads images. This is not a problem with the camera. To reduce the possibility of this phenomenon occurring, install the camera in a secure location.
What to do if “WARMING UP-PLEASE WAIT” appears on the display.
This message indicates that the temperature inside the camera has become extremely low. The camera will be automatically restarted when the inside camera is warmed up by the built-in heater. Please wait for a while.
We shall not be liable for content compensation, losses of recorded or edited content, and any direct or indirect consequential damages caused by failure to record or edit due to faults with this unit or the microSD memory card. In addition, the same provisions apply after the unit is repaired.

About the CMOS image sensor

• When continuously shooting a bright light source such as a spotlight, the color filter of the CMOS image sensor may become deteriorated and this may cause discoloration. Even when changing the fixed shooting direction after continuously shooting a spotlight for a certain period, the discoloration may remain.
• When shooting fast-moving subjects or objects crossing the shooting area may look to be bending askew.

Cleaning this product’s body
Be sure to turn off the power before cleaning.
Failure to observe this may cause injury.
Do not use benzine, thinner, alcohol, or any other types of solvents or detergents. Otherwise, it may cause discoloration. When using a chemical cloth for cleaning, read the caution provided with the chemical cloth product.

• Do not loosen or remove screws unless instructed to do so in the product documentation.

Cleaning the lens
Use lens cleaning paper (used to clean camera lenses or lenses of spectacles). When using solvent, use an alcohol solvent and do not use a thinner or a glass cleaner.

U1542/U1532
Cleaning of the front panel
Use lens cleaning paper (used to clean camera or spectacles lenses) to remove any dirt on the front panel. If dust or the like adheres at this time, the front panel may get scratched. We recommend rinsing for stubborn stains.
U2542/U2532
Cleaning of the dome cover
Use lens cleaning paper (used to clean camera or spectacles lenses) to remove any dirt on the dome cover. The mark of light-shielding parts left inside the dome or dirt on the dome cover may influence the reflection of infrared rays. Therefore, likewise, remove those marks and dirt using cleaning paper.

AVC Patent Portfolio License
THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE FOR THE PERSONAL USE OF A CONSUMER OR OTHER USES IN WHICH IT DOES NOT RECEIVE REMUNERATION TO (i) ENCODE VIDEO IN COMPLIANCE WITH THE AVC STANDARD (“AVC VIDEO”) AND/OR (ii) DECODE AVC VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED TO PROVIDE AVC VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION MAY BE OBTAINED FROM MPEG LA, L.L.C.
SEE http://www.mpegla.com
Product disposal/transfer
Data saved on this product or a storage device used with this product may lead to personal information leakage. When it is necessary to dispose of or give this product to someone, even when for repair, make sure that there is no data on this product.
When abandoning the memory media, it is recommended to destroy it physically after deleting data by PC.
Effects on images and image quality
Under the following conditions, image quality may deteriorate or images may become difficult to see.

• When there are raindrops on the dome cover or the front panel due to wind during rainfall.
• When there is snow on the dome cover or the front panel due to wind during snowfall. (varies depending on the amount and quality of snowfall).
• When the dome cover or the front panel is dirty due to dust in the air or vehicle exhaust.

Router
When connecting this product to the Internet, use a broadband router with the port forwarding function (NAT, IP masquerade). Refer to the Operating Instructions for further information about the port forwarding function.
Time & date setting
It is necessary to set the time & date before putting this product into operation. Refer to the Operating Instructions for descriptions of how to perform the settings.

Troubleshooting

Before asking for repairs, check the symptoms with the following table.
Contact your dealer if a problem cannot be solved even after checking and trying the solution in the table or if a problem is not described below.

compliant) and the RJ45 Network connector connected using an Ethernet cable? Check whether the connection is appropriately established.
• Depending on the PoE device, the power supply will stop when the demanded power exceeds its total power limit for all PoE ports.
Refer to the operating instructions of the PoE device in use.| Installation Guide
The LINK indicator does not light in orange even when the Ethernet cable is connected to the camera.| • Is the Ethernet cable connected appropriately? Connect the Ethernet cable appropriately.
• Is the hub or router connected to the camera operating appropriately?
Check if the hub or router in use is operating appropriately.
• Is the Ethernet cable connected to the camera broken? Replace the cable with another one.| Installation Guide
The focus can not be able to be automatically adjusted.| • In the following locations or with the following subjects, the focus may not be able to be automatically adjusted. In this case, manually adjust the focus.
• When the subject moves a lot
• When there are large changes to the lighting intensity
• When the light level is low
• When the subject or location is extremely bright or reflective
• When viewing through windows
• When
the front panel U1542 U1532
the dome cover U2542 U2532 is in a location where it can easily become dirty
• Locations where there is not much contrast such as a white wall
• When there is harsh flickering| Operating Instructions

Detail specifications

• Basic

U1542
PoE DC 48 V : 140 mA/ Approx. 6.7 W (Class 0 device) U1532
PoE DC 48 V : 150 mA/ Approx. 7.2 W (Class 0 device) U2542
PoE DC 48 V : 140 mA/ Approx. 6.7 W (Class 0 device) U2532
Operating environment
Ambient operating temperature:
Ambient operating humidity:| –30 °C to +50 °C {–22 °F to +122 °F}
(Power On range: –20 °C to +50 °C {–4 °F to +122 °F})
10 % to 100 % (no condensation)
Storage environment
Storage temperature:
Storage humidity:| –30 °C to +60 °C {–22 °F to +140 °F}
10 % to 95 % (no condensation)
Waterproof ²:| IP66 (IEC 60529), Type 4X (UL50E) NEMA 4X compliant
Shock resistance:| IK10 (IEC 62262)
Wind resistance:| Up to 40 m/s {approx. 89 mph}
Dimensions:| U1542/U1532
112.5 mm (W) × 112.5 mm (H) × 262 mm (D) {4-7/16 inches (W) × 4-7/16 inches (H) × 10-5/16 inches (D)}
U2542/U2532
ø154 mm × 103 mm (H) {ø6-1/16 inches × 4-1/16 inches (H)} Dome radius 42 mm {1-21/32 inches}
Mass:| U1542/U1532
Approx. 860g {1.90 lbs.}
U2542/U2532
Approx. 1.0 kg {2.21 lbs}
Finish:| Main body: Aluminum die cast/ PC resin, i-PRO white
Outer fixing screws: Stainless steel (Corrosion-resistant treatment)
U1542/U1532
Front panel: Polycarbonate resin, Clear
U2542/U2532
Dome cover: Polycarbonate resin, Clear
Other U2542/U2532| Tamper-resistant enclosure³

1 Refer to our support website for further information about Power source and Power consumption information.
2 Only when installation work is properly performed according to the Installation Guide and appropriate waterproof treatment is performed.
*3 The component that has a structure on which the screws that are accessible after installation cannot be screwed or unscrewed using an ordinary screwdriver.
• Camera

Image sensor:| Approx. 1/2.7 type CMOS image sensor U1542/U2542
Approx. 1/3 type CMOS image sensor U1532/U2532
---|---
Effective pixels:| Approx. 5.2 megapixels U1542/U2542
Approx. 2.4 megapixels U1532/U2532
Scanning area:| U1542/U2542
5.38 mm (H)×3.02 mm (V) {7/32 inches (H) × 1/8 inches (V)}
U1532/U2532
5.28 mm (H)×2.97 mm (V) {7/32 inches (H) × 1/8 inches (V)}
Scanning system:| Progressive
Minimum illumination:| U1542/U2542
Color : 0.21 lx {0.0195 footcandle}
(30IRE, F2.0, Maximum shutter: Off (1/30 s), AGC: 11)
0.3 lx {0.0279 footcandle}
(50IRE, F2.0, Maximum shutter: Off (1/30 s), AGC: 11)
0.019 lx {0.0018 footcandle}
(50IRE, F2.0, Maximum shutter: max. 16/30 s, AGC: 11)
BW : 0 lx {0 footcandle}
(50IRE, F2.0, Maximum shutter: OFF (1/30 s), AGC: 11, when the IR LED is lit)
0.12 lx {0.0111 footcandle}
(50IRE, F2.0, Maximum shutter: Off (1/30 s), AGC: 11)
0.0075 lx {0.0007 footcandle}
(50IRE, F2.0, Maximum shutter: max. 16/30 s, AGC: 11)
U1532/U2532
Color : 0.07 lx {0.0065 footcandle}
(30IRE, F2.0, Maximum shutter: Off (1/30 s), AGC: 11)
0.1 lx {0.0093 footcandle}
(50IRE, F2.0, Maximum shutter: Off (1/30 s), AGC: 11)
0.006 lx {0.0006 footcandle}
(50IRE, F2.0, Maximum shutter: max. 16/30 s, AGC: 11)
BW : 0 lx {0 footcandle}
(50IRE, F2.0, Maximum shutter: OFF (1/30 s), AGC: 11, when the IR LED is lit)
0.04 lx {0.0037 footcandle}
(50IRE, F2.0, Maximum shutter: Off (1/30 s), AGC: 11)
0.0025 lx {0.0002 footcandle}
(50IRE, F2.0, Maximum shutter: max. 16/30 s, AGC: 11)

• Converted value
  Intelligent Auto:| On/ Off
  Super Dynamic:| On/ Off
  The level can be set in the range of 0 to 31.
  Dynamic range:| Max. 102 dB U1542/U2542
  Max. 120 dB U1532/U2532
  (Super Dynamic: On, Level: 31)
  Maximum gain:| The level can be set in the range of 0 to 11.
  Backlight compensation (BLC)/
  Highlight compensation (HLC):| BLC/ HLC/ Off
  (only when Super Dynamic/ Intelligent auto: Off)
  Fog compensation:| On/ Off
  The level can be set in the range of 0 to 8.
  (only when Intelligent Auto/auto contrast adjust: Off)
  Light control mode setting:| ELC/ Indoor scene (50 Hz)/ Indoor scene (60 Hz)
  Color/BW:| [30fps mode]
  Max.1/10000s, Max. 1/4000 s, Max. 1/2000 s, Max. 1/1000 s, Max. 1/500 s, Max. 1/250 s, Max. 1/120 s, Max. 1/100 s, Max. 2/120 s, Max. 2/100 s, Max. 3/120 s, Max. 1/30 s, Max. 2/30 s, Max. 4/30 s, Max. 6/30 s, Max. 10/30 s, Max. 16/30 s
  [25fps mode]
  Max.1/10000s, Max. 1/4000 s, Max. 1/2000 s, Max. 1/1000 s, Max. 1/500 s, Max. 1/250 s, Max. 1/100 s, Max. 2/100 s, Max. 3/100 s, Max. 1/25 s, Max. 2/25 s, Max. 4/25 s, Max. 6/25 s, Max. 10/25 s, Max. 16/25 s
  Maximum shutter:| Off/ On(IR Light Off)/ On(IR Light On)/
  Auto1(IR Light Off)/ Auto2(IR Light On)/ Auto3(SCC)
  IR LED Light:| High/ Middle/ Low
  U1542/U2542
  Maximum irradiation distance:
  28 m {Approx. 91 ft} (30IRE)
  20 m {Approx. 65 ft} (50IRE)
  U1532/U2532
  Maximum irradiation distance:
  40 m {Approx. 131 ft} (30IRE)
  30 m {Approx. 100 ft} (50IRE)
• Converted value
  White balance:| ATW1/ ATW2/ AWC
  Digital noise reduction:| The level can be set in the range of 0 to 255.
  Privacy zone:| On/ Off
  Up to 8 zones are available
  VIQS:| On/ Off
  Up to 8 zones are available
  Camera title on screen:| On/ Off
  Up to 20 characters (alphanumeric characters, marks)
  Video Motion Detection (VMD): Scene| On/ Off
  4 areas available
  Change Detection (SCD):| On/ Off
  1 area available
    Image rotation:| 0° (Off)/ 90°/ 180° (Upside-down)/ 270°

• Lens

Zoom ratio:
Optical zoom
Extra optical zoom| 2.5x (Motorized zoom / Motorized focus)
U1542/U2542
max 10.0x
(2.5x – 3.3x when resolution is 1920×1080) (2.5x – 10.0x when resolution is 640×360)
U1532/U2532
max 7.5x
(2.5x – 3.8x when resolution is 1280×720) (2.5x – 7.5x when resolution is 640×360)
---|---
Digital (electronic) zoom:| Choose from 3 levels of x1, x2, x4
Focal length:| 2.9 mm – 7.3 mm {1/8inches – 9/32inches}
Maximum aperture ratio:| 1:2.0 (WIDE) – 1:3.0 (TELE)
Focus range:| 1 m {39-3/8 inches} – ∞
Aperture range:| F2.0 – F3.0
Angular field of view:| U1542
[16:9 mode] [4:3 mode] is not supported.
Horizontal: 44° (TELE) – 103° (WIDE)
Vertical: 25° (TELE) – 57° (WIDE)
U1532
[16:9 mode] Horizontal: 44° (TELE) – 102° (WIDE)
Vertical: 24° (TELE) – 56° (WIDE)
[4:3 mode] Horizontal:  36° (TELE) – 84° (WIDE)
Vertical: 27° (TELE) – 63° (WIDE)
U2542
[16:9 mode] [4:3 mode] is not supported.
Horizontal: 43° (TELE) – 100° (WIDE)
Vertical: 24° (TELE) – 56° (WIDE)
U2532
[16:9 mode] Horizontal: 43° (TELE) – 100° (WIDE)
Vertical: 24° (TELE) – 55° (WIDE)
[4:3 mode] Horizontal: 35° (TELE) – 82° (WIDE)
Vertical: 27° (TELE) – 61° (WIDE)
DORI 1:
Detect (25 ppm / 8 ppf)
Observe (62.5 ppm / 19 ppf)
Recognize (125 ppm / 38 ppf)
Identify (250 ppm / 76 ppf)
Detect (25 ppm / 8 ppf)
Observe (62.5 ppm / 19 ppf)
Recognize (125 ppm / 38 ppf)
Identify (250 ppm / 76 ppf)| U1542
126.7 m {415.8 ft} (TELE) – 40.7 m {133.6 ft} (WIDE)
50.7 m {166.3 ft} (TELE)     – 16.3 m {53.4 ft} (WIDE)
25.3 m {83.2 ft} (TELE)       – 8.1 m {26.7 ft} (WIDE)
12.7 m {41.6 ft} (TELE)       – 4.1 m {13.4 ft} (WIDE)
U1532
98.5 m {323.1 ft} (TELE)     – 35.5 m {116.6 ft} (WIDE)
39.4 m {129.2 ft} (TELE)     – 14.2 m {46.6 ft} (WIDE)
19.7 m {64.6 ft} (TELE)       – 7.1 m {23.3 ft} (WIDE)
9.8 m {32.3 ft} (TELE)         – 3.6 m {11.7 ft} (WIDE)
DORI 1:
Detect (25 ppm / 8 ppf)
Observe (62.5 ppm / 19 ppf)
Recognize (125 ppm / 38 ppf)
Identify (250 ppm / 76 ppf)
Detect (25 ppm / 8 ppf)
Observe (62.5 ppm / 19 ppf)
Recognize (125 ppm / 38 ppf)
Identify (250 ppm / 76 ppf)| U2542
130.0 m {426.4 ft} (TELE) – 43.0 m {141.0 ft} (WIDE)
52.0 m {170.6 ft} (TELE)     – 17.2 m {56.4 ft} (WIDE)
26.0 m {85.3 ft} (TELE)       – 8.6 m {28.2 ft} (WIDE)
13.0 m {42.6 ft} (TELE)       – 4.3 m {14.1 ft} (WIDE)
U2532
101.5 m {333.0 ft} (TELE) – 36.8 m {120.8 ft} (WIDE)
40.6 m {133.2 ft} (TELE)     – 14.7 m {48.3 ft} (WIDE)
20.3 m {66.6 ft} (TELE)       – 7.4 m {24.2 ft} (WIDE)
10.1 m {33.3 ft} (TELE)       – 3.7 m {12.1 ft} (WIDE)
---|---
Adjusting angle:
U2542/U2532| Horizontal (PAN) angle: -170° – +190°
Vertical (TILT) angle: -30° – +85°
Azimuth (YAW) angle: ±100°

*1 Maximum distance at which a camera’s tele and wide lens can meet DORI specifications. This value does not indicate the performance of the camera. Calculations are made with the camera installed horizontally at a resolution of maximum resolution.
• Camera mount bracket U1542/U1532

Adjusting angle:|
Horizontal: ±180° (Adjust by horizontal (PAN) angle) Vertical:      0° to 100° (Adjust by vertical (TILT) angle)
Yaw: –190° to +100° (Adjust by azimuth (YAW) angle)