AQIRYS LIBERTAS Gaming Keyboard

Packing List

1.Wireless Mechanical Keyboard LIBERTAS

2. Wireless Transmitter
3. USB Type-C charging coble
4. Keycap Puller
5. Key Switch Puller
6. Multi-tool Brush
7. 5-pin tactile switch ( 15 pcs.)
8. Extra Volume Wheel
9. Silencing Foam
10. 1 2 Extro Keycaps
1 1. Microfiber Keyboard Cover

Connectivity

To enjoy the flexibility offered by our wireless keyboard, you have the option to choose between three connectivity modes: Type-C (wired connection), Bluetooth®, and Wireless 2.AG. The following steps will help you change the connectivity mode:

1.  Locate the Connectivity Button: This is located on the bottom of the keyboard, next to the holder for the wireless transmitter.
   

2. Move the Button to the Desired Position:
   Type-C (wired connection): Move the button to the right side. Be aware, ii the keyboard is not connected via a wire, it will be turned off.

Wireless 2.AG: Move the button to the left side.

Bluetooth®: Move the button to the center.

Wireless 2.4 GHz

1. Alter switching the keyboard to 2.4G mode, it will automatically enter Pairing mode (connection).
   If the keyboard does not automatically enter this mode, you can manually switch it by holding down the FN+4 key combination for 3 seconds. The Pairing mode is also indicated by the blue LED indicator labeled “2.4G” on the keyboard, which will flash intermittently in blue when the keyboard is in connection mode.

2. Connect the USB transmitter to an available port on your device. The necessary driver will be automatically installed, and the device will be displayed with the name “AQIRYS LIBERTAS Wireless Gaming Keyboard.” The transmitter will enter Pairing mode.

3. The keyboard and transmitter will automatically connect. Once connected, the LED indicator labeled “2.4G” on the keyboard will remain steadily lit in blue.
   Note: To conserve battery power, the keyboard lights will turn off if no key is pressed for one minute.

Bluetooth®

1. If you’ve moved the connectivity button to the central position (Bluetooth®), the keyboard will automatically enter Pairing mode. The blue LED indicator, labeled “BT” on the keyboard, will start flashing quickly, signaling that the keyboard is ready to connect.
2. Open the Bluetooth® settings on your device and search for “AQIRYS LIBERTAS Wireless Gaming Keyboard.” Select it to begin the connection process.
3. If everything went well, the blue LED indicator (BT) will remain steadily lit, without flashing.
   Note: To conserve battery power, the keyboard lights will turn off if no key is pressed for one minute.

Wired

1. Please switch the connectivity button located on the bottom of the keyboard to the “Type-C” position to enable wired mode.
2. Connect the keyboard to your computer’s USB interface.
3. Visit the website https://www.aqirys.com/product/libertas to download the appropriate software. Alter downloading, unzip and install the software, then use it for detailed keyboard configuration.

Backlight control

Press FN + INS – Select lighting effect
Press FN + Right Arrow – Select lighting color
Press FN + Up Arrow – Increase brightness
Press FN + Down Arrow – Decrease brightness
Press FN + Left Arrow – Change lighting direction
Press FN +DEL-Turn off lighting
Press FN + Right CTRL – Change side lighting effect
Press FN + =+ – Increase lighting effect speed
Press FN + — – Decrease lighting effect speed
Press FN + ESC – Hold for 5 seconds to reset the lighting

Volume wheel control

The volume wheel on our keyboard provides you with optimal control over your audio experience.

• Rotating to the right increases the audio volume level.
• Rotating to the left decreases the audio volume level.
•  short press initiates the play/pause command for audio playback from the last accessed media player.
  

Multimedia shortcuts

Press FN + Fl – File Explorer
Press FN + F2 – Browser
Press FN + F3 – Calculator
Press FN + F4 – Media Player
Press FN + F5 – Previous Song
Press FN + F6 – Next Song
Press FN + F7 – Play/ Pause
Press FN + F8 – Stop
Press FN + F9 – Mute
Press FN + Fl0 – Volume –
Press FN + Fl l -Volume+
Press FN + Fl2 – Email
Press FN + WIN – Lock Windows Key/ Unlock Windows Key

Auto disconnect and reconnect

If the keyboard remains inactive for 3 minutes, it enters the initial standby mode, with the light indicator off but the Bluetooth® or 2.4G connection still functional. To reactivate, press any key and the keyboard will become immediately functional. If the keyboard is inactive for 10 minutes, it enters advanced standby mode and disconnects from the Bluetooth® or 2.4G receiver. Press any key to reactivate; initially, the first key press will not generate an input, but the connection will automatically restore and the keyboard functionality will be restored.

Battery Status & Charging

The light indicator located under the spoce bar provides essential information about the battery status. A flashing red light indicates that the battery level is critically low. In this case, the user is advised to plug in the charging cable included in the package. During the charging phase, the indicator will display a green light. The 8000mAh battery will reach a 100% charge in approximately 14 hours. Upon completion of the charging process, the green light will turn off, signaling that the battery is fully charged.

Keycap removal

Using the keycap extraction tool, line up diagonally with the key you want to replace and gently pull while holding down the clips.

Switch removal

1. Using the Switch Removal Tool, align the clamping teeth vertically (on the Y-Axis) at the center of the switch, as shown in the picture above.
2. Grab the switch and apply pressure until the switch releases itself from the PCB plate.
3. Using firm but gentle force pull the switch away from the keyboard using a vertical motion.
   

Switch installation

1. Check that all metallic pins al the switch are perfectly straight and clean.
2. Insert the mechanical switch in the specific location making sure that its position is similar ta the one in the illustration: the lag a lacing the bottom al the keyboard and the recessed area far the LED illumination lacing the tap al the keyboard.
3. Press the switch dawn until you hear a click. This means that the contact pins have correctly entered the socket an the keyboard board .
4. Inspect the switch ta ensure it is correctly attached ta the keyboard, and test it.

WARNING!

If the mechanical switch does not work, you may have bent one al the pins during installation.
Remove the mechanical switch and carefully try ta straighten the bent pin If the installation process is not performed correctly, bath the mechanical contact pins and the socket an the keyboard PCB can be irreparably damaged, requiring their complete replacement, which is not covered by the product warranty.

Multi-tool brush

1. Cleaning brush
2. Pen-type metal tip
3. High density brush
4. High density sponge
   

Sound-absorbing foam

To install the loam, remove the Space key using the keycap extractor, which is included in the product box. Then, stick the two pieces of loam under the key, according to the sketch in the manual. Make sure the loam pieces are securely attached and do not interfere with the keyboard mechanism. Reattach the Space key and press firmly to ensure it is properly fixed.

Warnings

1. Keep the keyboard in a room-temperature environment; avoid direct exposure to sunlight.
2. Keep the keyboard away from lire and hot objects.
3. Ensure the keyboard remains dry; avoid exposure to humid conditions and da not submerge it in liquid .
4. Use only the USB cable provided in the package for charging.
5. The keyboard allows for the replacement al mechanical contacts. For details, refer ta the dedicated section in the manual.
6. If the key board show physical am age (bends, deformities, corrosion, tic.), contact authorized service.
7. In case of issues such as abnormal smell, high operating temperature, or abnormal changes in color or shape, immediately stop using the keyboard and contact authorized service.
8. Incorrect battery replacement may result in the risk al explosion. The battery should only be replaced with a similar or equivalent type. Contact authorized service for replacement.
   This product is not a toy. It is recommended that children under 14 use the keyboard under adult supervision.
   WARNING: Improper use of the keyboard may lead to its deterioration are other potential risks.

REGULATORY

• * Unauthorized repairs or disassembly of the product will void the warranty and may cause its damage.

  • This product is safe and complies lo EU requirements. (compliant with directive EMC (2014/30/EU)) Manual de utilizer User Manual REGULATORY
  • This product is manufactured conforming with the European Ro HS standard. (compliant with directive Ro HS 2.0 (2015/863/EU)l
  • Using the WEEE symbol (the crossed-out bin) indicates that the electrical ad electronic equipment inside the package con be recycled. When recycling waste properly, you protect the environment on people health. Segreg1;1ted household waste collection, ooids recycle::lemgleriol5cmd opponents used the production of this device. For detailed information about recycling, please contact your retailer or a local authority.
  • The batteries must not be disposed of with your other household waste; treat them in compliance with the local regulations or contact your local city office, your household waste disposal service, or the shop where you purchased the product.
    Frequency bands and Powers (Headset and Transceiver) a. Frequency band(s) in which the radio equipment operates:

• WIFI: 2A02 – 2480 MHz
  b. Maximum radio-frequency power transmitted in the frequency bond(soju in which the radio equipment operates:

• GFSK, Pl/A DQPSK, 8DPSK: 10 dBm

  • Reparative reauthorize soul disassembler preductule due la adularia guaranties is pol causa deteriorate Luis.
  • Proudful Este unduly sager, conform cu cerein tele UE. (respell directive EMC (2014/30/EU))
  • Aces! prahus e1te fabricate in concordant cu standardly European RoHS. (respective directive RoHS 2.0 (2015/863/EU))
  • Utilizer symbolled WEEE (pueblo taiaha cu un X) indico fatal catch Pimentel electric is electronica din interaural obloquie pot fi recycle. Cond recirculate casuarina in mod Cora spun Zator protonate medial conjuror. Coelentera selective ajuga la recycler materialled is componential foliate la fabric area acetum equipment. Petur information retaliate Pravind recycler, via rug am so contacted connatural sou authoritative locale.
  • sterile nu tribune truncate imperia cu cellulate dasyure menagerie tattle in concomitate cu elementary locale soul cantatas befoul local al oracular, service de eliminate a da, auditor Minaj are soul magazine de under ate adhibition proudful.

If you encounter errors or any other problems with the product don’t hesitate to contact us.

SUPPORT

[email protected]

MULTUMIM!

Thank you For handpicking LIBERTAS to be the centerpiece of your gaming gear! Please, follow the instructions from the user manual to successfully complete the installation of your new gear.

SOLID #SMOOTH #FAST #ELEMENTAL Welcome to the feel of AQIRYS®!

© AQIRYS”‘. All rights reserved. AQIRYS® name and logo and all other related products, service names, and design marks are trademarks or registered trademarks of PC-coolers SRL.
All other brand names and trademarks are the property of their respective owners.
Specifications and design are subject to change without notice due to product improvements.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>