TESLA PC502WDW Panel Heater User Guide
- June 17, 2024
- Tesla
Table of Contents
TESLA PC502WDW Panel Heater
Specifications:
- Operation: Via a mobile application using WiFi
- Compatibility: Android devices with Google Play
- Power Button: Long press for 5 seconds to enter WiFi network pairing mode
- Indicator Light: Flashes quickly when in pairing mode, stays lit when connected
- Control: Remote control of the heater through the mobile application
Product Usage Instructions
Step 1: Download the Mobile Application
In order to control the Panel Heater PC502WDW using your mobile device, you
need to download the Tesla Smart application. Follow the steps below:
- Scan the QR code to download the application from Google Play. You can find the QR codes on the heater’s housing or packaging.
- Alternatively, search for “Tesla Smart” in Google Play and click on the download button to install the application.
Step 2: Register and Connect
Once you have downloaded the Tesla Smart application, follow the
registration process to connect your Panel Heater:
- Open the Tesla Smart application and click on “Register”.
- Follow the on-screen instructions to complete the registration process.
- Long press the power button on the Panel Heater for 5 seconds until the indicator light starts flashing quickly. This puts the heater in WiFi network pairing mode.
- Once the heater is in pairing mode, the indicator light will stay lit continuously, indicating a successful connection.
- In the Tesla Smart application, select “Small Home Appliance” and scroll down to select “Panel Heater (Wi-Fi)”.
Step 3: Control the Heater
After completing the registration process and installation, you can now
start controlling the Panel Heater PC502WDW using the Tesla Smart application.
Use the application to adjust temperature settings, set timers, and monitor
the heater’s status.
Frequently Asked Questions
Q: Where can I find the QR code to download the Tesla Smart application?
A: The QR code can be found on the housing of the Panel Heater PC502WDW or
on its packaging.
Q: How do I enter WiFi network pairing mode?
A: Long press the power button on the Panel Heater for 5 seconds until the
indicator light starts flashing quickly. This indicates that the heater is in
WiFi network pairing mode.
Q: How can I control the heater after connecting it to the mobile
application?
A: Once connected, you can control the Panel Heater PC502WDW using the
Tesla Smart application. Use the application to adjust temperature settings,
set timers, and monitor the heater’s status.
OPERATION VIA A MOBILE APPLICATION USING WIFI
- Scan the QR code to download the application from Google Play. QR codes can also be found on the heater’s housing and packaging.
- In order to correctly carry out the registration process:
- After searching for the Tesla Smart, click “Download
- After downloading the application, go to the registration process, the process is shown in the instructions as follows
- At this point, long press for power button for 5 seconds, when the indicator light flashes quickly, then enter WiFi network pairing mode. When connected, the LED lights up continuously. Select Small Home Appliance, scroll down and select Panel Heater (Wi-Fi)
- After completing the registration process and installation, you can start controlling the heater with the application
tesla.info
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>