DK2 EWX004 Wireless Snowplow Remote User Guide
- June 17, 2024
- DK2
Table of Contents
DK2 EWX004 Wireless Snowplow Remote
Product Information
Specifications
- Model: EWX004
- Manufacturer: DK2
- Location: DK2 USA West, 3311 Meade Avenue Ste E Dock 13, Las Vegas, Nevada 89102, USA
- Corporate Head Office: DK2 Corporate Head Office, 5330 Mainway, Burlington, Ontario L7L6A4, Canada
- DK2 USA East: 3750 South Avenue North Unit, Toledo, Ohio 43615, USA
- Customer Service: 1 888-277-6960 | www.dk2.com
- Language: English
Product Usage Instructions
Troubleshooting
If your wireless snowplow remote has stopped working, follow these troubleshooting techniques:
- If the light on your wireless remote is flashing red, ensure:
- The ground wiring coming from your transmitter box is connected to the negative terminal of your battery.
- You have tried changing the battery on your remote.
- You have tried resetting your wireless remote.
- If you have attempted all techniques and your remote is still not functional, you may need to replace it.
Resetting Your Wireless Remote
- Take off one of the leads from the battery (positive or negative).
- Turn on the remote’s wireless emitter and press the IN and OUT buttons simultaneously for 3 seconds. After 3 seconds, the wireless remote light will turn a solid green.
- Reconnect your lead back to the battery.
Note: The buttons mentioned here are labeled “IN” and “OUT” on the remote.
FAQ
Is your remote within the warranty period?
If your remote is within the warranty period, please visit https://detailk2.com/warranty to fill out our product warranty form. We will send you a replacement covered by your included 1-year limited warranty.
Is your remote outside its warranty period?
If your remote is outside its warranty period, you can purchase a brand new wireless remote kit for your DK2 Snowplow. US customers can visit the DK2 parts store at https://detailk2.com/parts/snowplow-parts, while Canadian customers can visit https://detailk2.ca/parts/snowplow-parts.
EWX004
RESETTING YOUR WIRELESS SNOWPLOW REMOTE
TROUBLESHOOTING
HAS YOUR WIRELESS SNOWPLOW REMOTE STOPPED WORKING?
Not to worry, there are several different troubleshooting techniques to get
you controlling your snowplow from the comfort of your vehicle.
IF THE LIGHT ON YOUR WIRELESS REMOTE IS FLASHING RED, MAKE SURE THAT:
- The ground wiring coming from your transmitter box is going back to the negative terminal on your battery.
- You have tried changing the battery on your remote.
- You have tried resetting your wireless remote.
RESETTING YOUR WIRELESS REMOTE
- Take off one of your leads from the battery (positive or negative).
- Turn on the remote’s wireless emitter and press the IN and OUT buttons simultaneously for 3 seconds. After 3 seconds, the wireless remote light will turn a solid green.
- Reconnect your lead back to the battery.
If you have attempted all techniques and are still not getting a functional remote, you may need to replace your wireless remote.
IS YOUR REMOTE WITHIN THE WARRANTY PERIOD?
Please visit https://detailk2.com/warranty to fill out our product warranty
form so we can send you a replacement covered by your included 1-year limited
warranty.
IS YOUR REMOTE OUTSIDE ITS WARRANTY PERIOD?
Please visit the DK2 parts store at https://detailk2.com/parts/snowplow-
parts (US Customers) or https://detailk2.ca/parts/snowplow-parts (Canadian
Customers) to purchase a brand new wireless remote kit for your DK2 Snowplow.
DK2 USA WEST
3311 MEADE AVENUE STE
E DOCK 13, LAS VEGAS, NEVADA 89102 USA
DK2 CORPORATE HEAD OFFICE
5330 MAINWAY
BURLINGTON, ONTARIO L7L6A4 CANADA
DK2 USA EAST
3750 SOUTH AVENUE NORTH UNIT, TOLEDO, OHIO 43615 USA
CUSTOMER SERVICE 1 888-277-6960 | WWW.DK2.COM