DK2 POWER OPS227 27 Ton Horizontal and Vertical Hydraulic Log Splitter Owner’s Manual

October 30, 2023
DK2 POWER

DK2-POWER-logo

DK2 POWER OPS227 27 Ton Horizontal and Vertical Hydraulic Log Splitter

DK2-POWER-OPS227-27-Ton-Horizontal-and-Vertical-Hydraulic-Log-Splitter-
product

Product Information

The OPS227 is a 27-ton horizontal and vertical hydraulic log splitter. It has a splitting capacity of 13 seconds and a hydraulic flow rate of 15GPM (56.8LPM) with two-stage hydraulic oil capacityof 6.5gal (24.6L). The hydraulic oil filter is 10- micron (1250 mesh) paper with NBR (Buna-N) seals. The splitter has an 8 (20.3cm)high, heat-treated steel wedge and an 8 (20.3cm) footplate beam. It also features an auto-retract valve with an adjustable detent, 2 (5.08cm) ball coupler with safety chains and a wheelbase of 37 (94cm). The assembled dimensions of the splitter are 87.4 (L) x 49.2 (W) x 35.8 (H) @ 507lb and the shipping dimensions are 70.9 (L) x 31.5 (W) x 19.7 (H) @ 551.2lb.

Product Usage Instructions

Before using the OPS227 log splitter, ensure that you have read and understood the user manual completely.

1. Preparation:

  • Place the splitter on a level surface.
  • Check the hydraulic oil level and add if necessary using AW32/AW46 type hydraulic oil only.
  • Connect the splitter to a power source using a two-prongedplug.
  • Ensure that all moving parts are clear of any obstacles beforestarting the splitter.

2. Operation:

  • Place the log on the splitter beam and adjust it to the desired position.
  • Make sure the log is stable and secure before starting the splitter.
  • Activate the splitter by pulling the lever or pressing the button.
  • Wait until the wedge has split the log before retracting it.
  • Repeat the process for each log.

3. Maintenance:

  • Regularly check the hydraulic oil level and add if necessary using AW32/AW46 type hydraulic oil only.
  • Replace the hydraulic oil filter every 50 hours of operation or as needed.
  • Check the wedge and beam for damage or wear and replace if necessary.

Following these instructions will ensure safe and efficientusage of the OPS227 log splitter.

DESCRIPTION

Introducing the 27-ton horizontal and vertical hydraulic log splitter. The DK2 POWER OPS227 is driven by a powerful KOHLER® SH265 6.5HP 196cc engine. This machine is capable of splitting up to 25.5 inches in length and 19.6 inches in diameter with uncompromising force at a cycle speed of 13 seconds, all while using the full potential of its 8-inch heat-treated steel wedge. The OPS227 sits on a 37-inch wheelbase equipped with 16-inch O.D. 4.8-8 tires and includes a tow bar for easy job site moving.

SPECIFICATION

  • ENGINE KOHLER® SH265 6.5HP 196cc

  • SPLITTING CAPACITY 25.5” (L) x Ø19.6” 64.7cm (L) x Ø54.8cm CYCLE TIME 13 seconds

  • HYDRAULIC CYLINDER Ø4” (Ø10.2cm) x 24” (60.9cm) stroke

  • HYDRAULIC FLOW RATE 15GPM (56.8LPM), two-stage

  • HYDRAULIC OIL CAPACITY 6.5gal (24.6L)

  • TYPE OF HYDRAULIC OIL AW32/AW46

  • HYDRAULIC OIL FILTER 10 micron (1250 mesh) paper with NBR (Buna-N) seals

  • WEDGE 8” (20.3cm) high, heat-treated steel

  • BEAM 8” (20.3cm) foot plate

  • VALVE Auto-retract with adjustable detent

  • WHEELS & TIRES D.O.T. approved 4.80-8 Ø16” (Ø40.6cm) OD

  • WHEELBASE 37” (94cm)

  • COUPLER 2” (5.08cm) ball with safety chains

  • ASSEMBLED DIMENSIONS & WEIGHT
    87.4” (L) x 49.2” (W) x 35.8” (H) @ 507lb 222cm (L) x 125cm (W) x 91cm (H) @ 230kg

  • SHIPPING DIMENSIONS & WEIGHT
    70.9” (L) x 31.5” (W) x 19.7” (H) @ 551.2lb 180cm (L) x 80cm (W) x 50cm (H) @ 250kg

  • WARRANTY 2-year KOHLER® parts and labor 1-year DK2 chassis

ITEM NUMBER
OPS227

UPC
827518008577

FEATURES

  • Powered by a KOHLER® SH265 6.5HP 196cc engine 1
  • 25.5” x Ø19.6” (64.8cm x Ø49.8cm) log capacity
  • 8” (20.3cm) heat-treated steel wedge 2
  • 13-second cycling time
  • D.O.T. approved Ø16” (Ø40.6cm) OD road tires sitting on a 37” (94cm) wheelbase 3
  • Folds 90º for both horizontal and vertical log splitting capability 4
  • Two-stage 15GPM (56.8LPM) pump
  • 6.5 gallon (24.6 litres) hydraulic fluid capacity
  • Auto-retracting adjustable detent valve
  • 2” (5.08cm) ball coupler with safety chains 5
  • Includes 2-year KOHLER® engine parts and labor and 1-year DK2 chassis warranty
  • NOT HIGHWAY TOWABLE AND MAX SPEED 25MPH (40KM/H)

DETAILK2.COM/POWER-EQUIPMENT

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals