KOHLER K-1219 Drop in Bath Owner’s Manual
- July 21, 2024
- Kohler
Table of Contents
KOHLER K-1219 Drop in Bath
Specifications
- Product : 60 x 32 drop-in bath K-1219
- Material : Not specified
- Weight : 80 lbs (36.3 kg)
- Water Depth : 14-1/2″ (368 mm)
- Water Capacity : 64 gal (242.3 L)
**Product Information
**
The 60 x 32 drop-in bath K-1219 is a high-quality bathtub designed for comfortable and relaxing baths. It features a reversible drain location, a basin area of 47 x 20 inches at the bottom and 53 x 23 inches at the top, and a sturdy construction that can hold up to 80 lbs of weight. The water depth is approximately 14-1/2 inches with a water capacity of 64 gallons.
Installation
- Measure your actual product for rough-in details before installation.
- Install the product according to the provided installation instructions.
- Ensure that the hot water supply is at least 70% of the bath capacity or greater.
- Drop-in
Required Products/Accessories
- K-T37391 Rotary-turn bath drain trim
- K-T37392 Rotary-turn bath drain trim or
- K-37385 rough-in cable drain, PVC, 45” cable
- K-78439 45″ cable bath drain
Recommended Products/Accessories
- K-1181 Vinyl Tiling-in Bead
- K-1491 Bath/Whirlpool Pillow
- K-1601 Bath/whirlpool footstep, removable
- K-7213 27″ Cable Bath Drain
- K-7214 27″ Cable Bath Drain
- K-7259 Brass toe tap bath drain
- K-706000-D3 Frameless Sliding Bath Door
- K-706000-L 62″ H sliding bath door with 1/4″-thick glass
- K-706004-D3 Frameless Sliding Bath Door
- K-706004-L Frameless Sliding Bath Door
- K-23726 Drain treatment
- K-23732 Tub & shower cleaner
- K-31796 Above-the-floor bath drain kit
- K-31798 Bath drain kit
Features
- • 60″L x 32″W x 20″H
- • Standard-sized bath designed for quick and easy installation
- • Models available featuring integral apron and nailing flange
- • Textured bottom surface
Material
Acrylic
Codes/Standards
- CSA B45.5/IAPMO Z124
- ASTM E162
- ASTM E662
- IAPMO Certification
KOHLER® Plastic Baths and Shower Bases Lifetime Limited Warranty
See website for detailed warranty information
DIMENSION
Technical Information
All product dimensions are nominal.
- Drain location: Reversible
- Basin area, bottom: 47″ x 20″ (1194 mm x 508 mm)
- Basin area, top: 53″ x 23″ (1346 mm x 584 mm)
- Weight: 80 lbs (36.3 kg)
- Minimum floor load : 48 lbs/ft² (234.4 kg/m²)
- Water depth: 14-1/2″ (368 mm)
- Water capacity: 64 gal (242.3 L)
- Cutout: Drop-in, 58-1/2″ x 30-1/2″ (1486 mm x 775 mm)
- Minimum flat for the door: 2-3/8″ (60 mm)
Notes
- Measure your actual product for rough-in details.
- Install this product according to the installation instructions.
- The hot water supply should be 70% of the capacity of the bath or greater. Installations will vary.
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product
specifications. For the most current Specification Sheet, go to
www.kohler.com USA or
www.kohler.ca Canada 2-28-2024 21:38 – US
FAQ
Q: Can I install this bathtub without professional help?
A: While it’s recommended to have a professional install the bathtub for
optimal results, if you have experience with plumbing and installation, you
may be able to install it yourself by following the provided instructions
carefully.
Q: How do I clean and maintain this bathtub?
A: To clean the bathtub, use mild soap and water with a soft cloth or sponge.
Avoid abrasive cleaners that may damage the surface. Regularly check and clean
the drain to prevent clogs.