levelone GEU-1621 16 Port Gigabit Switch Installation Guide
- June 3, 2024
- LevelOne
Table of Contents
levelone GEU-1621 16 Port Gigabit Switch
Hardware Installation Figures
Flat Surface Installation
Installation
LED Indicator
LEDIndicator | Status | Meaning |
---|
Power
| Solid green| Power is on.
Off| Power is off.
Link/Act/Speed
| Solid green| A device is connected to the port at a speed of 1000Mbps
Solid orange| A device is connected to the port at a speed of 10/100Mbps
Off| The port is NOT connected.
Mode Control:
You can select the switch mode.
- Normal mode: All ports can communicate with each other.
- Flow control mode: The flow control function is close, all ports can communicate with each other.
- VLAN mode: 1~14 ports can not communicate with each other but can communicate with 15~16 ports.
- Extend mode: Speed of 1~8 ports is reduced to 10 Mbps, transmission the distance can reach 250m
Connecting Equipment
- Step1. Inspect the PowerAdapter carefully, and make sure that it is properly connected to a power source.
- Step2. Plug-in the Power Adapter to the Switch.
- Step3. Connect your network devices with the switch by using an Ethernet cable. (e.g. Cat-5e)
Declaration of Conformity
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>