DK2 SAW8020 Snowplow Winch Strap User Guide
- June 17, 2024
- DK2
Table of Contents
DK2 SAW8020 Snowplow Winch Strap
SAW8020
SNOWPLOW WINCH STRAP REPLACEMENT
*OLD STYLE WINCH
INSTALLATION
- Locate the hex screw on the winch spool 1
- Remove the screw using an allen key 2 and set aside. Do not lose the screw, as you will need it to reinstall your new winch strap.
- Use the tool that was provided in your plow kit 3 to begin removing the winch pin (you may be able to use needle nose pliers as well)
- Screw in the provided tool 3 and pull the pin 4 free from the winch. Once removed, you will be able to pull the strap away freely.|
-
You’ve now successfully removed your old winch strap. Now it’s time to take your new winch strap and reverse the steps above to complete your winch strap replacement.
-
NOTE: When re-installing the new winch strap, make sure the pin is inserted the correct way.
The hole in the pin 4 should always align with the hex screw 1 so that you can lock the winch pin in place.
If you have any questions, please contact us at support@detailk2.com or call us at 1 888-277-6960. Our hours are Monday-Friday 8am-4pm EST.
DK2 USA WEST
3311 MEADE AVENUE STE E DOCK 13, LAS VEGAS, NEVADA 89102 USA
DK2 CORPORATE HEAD OFFICE
5330 MAINWAY BURLINGTON, ONTARIO L7L6A4 CANADA
DK2 USA EAST
3750 SOUTH AVENUE NORTH UNIT, TOLEDO, OHIO 43615 USA
CUSTOMER SERVICE 1 888-277-6960 | WWW.DK2.COM
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>