CHRISTIE 020-101264-03 Vive Audio LA5 Speaker User Manual
- June 17, 2024
- CHRISTIE
Table of Contents
Christie Vive Audio LA5
Speaker
User Manual
020-101264-03
020-101264-03 Vive Audio LA5 Speaker
NOTICES
COPYRIGHT AND TRADEMARKS
© 2017 Christie Digital Systems USA Inc. All rights reserved.
All brand names and product names are trademarks, registered trademarks or
trade names of their respective holders.
GENERAL
Every effort has been made to ensure accuracy, however in some cases changes
in the products or availability could occur which may not be reflected in this
document. Christie reserves the right to make changes to specifications at any
time without notice.
Performance specifications are typical, but may vary depending on conditions
beyond Christie’s control such as maintenance of the product in proper working
conditions. Performance specifications are based on information available at
the time of printing. Christie makes no warranty of any kind with regard to
this material, including, but not limited to, implied warranties of fitness
for a particular purpose. Christie will not be liable for errors contained
herein or for incidental or consequential damages in connection with the
performance or use of this material. Canadian manufacturing facility is ISO
9001 and 14001 certified.
WARRANTY
Products are warranted under Christie’s standard limited warranty, the
complete details of which are available by contacting your Christie dealer or
Christie. In addition to the other limitations that may be specified in
Christie’s standard limited warranty and, to the extent relevant or applicable
to your product, the warranty does not cover:
a. Problems or damage occurring during shipment, in either direction.
b. Projector lamps (See Christie’s separate lamp program policy).
c. Problems or damage caused by use of a projector lamp beyond the recommended
lamp life, or use of a lamp other than a Christie lamp supplied by Christie or
an authorized distributor of Christie lamps.
d. Problems or damage caused by combination of a product with non-Christie
equipment, such as distribution systems, cameras, DVD players, etc., or use of
a product with any non-Christie interface device.
e. Problems or damage caused by the use of any lamp, replacement part or
component purchased or obtained from an unauthorized distributor of Christie
lamps, replacement parts or components including, without limitation, any
distributor offering
Christie lamps, replacement parts or components through the internet
(confirmation of authorized distributors may be obtained from Christie).
f. Problems or damage caused by misuse, improper power source, accident, fire,
flood, lightening, earthquake or other natural disaster.
g. Problems or damage caused by improper installation/alignment, or by
equipment modification, if by other than Christie service personnel or a
Christie authorized repair service provider.
h. Problems or damage caused by use of a product on a motion platform or other
movable device where such product has not been designed, modified or approved
by Christie for such use.
i. Problems or damage caused by use of a projector in the presence of an oil-
based fog machine or laser-based lighting that is unrelated to the projector.
j. For LCD projectors, the warranty period specified in the warranty applies
only where the LCD projector is in “normal use” which means the LCD projector
is not used more than 8 hours a day, 5 days a week.
k. Except where the product is designed for outdoor use, problems or damage
caused by use of the product outdoors unless such product is protected from
precipitation or other adverse weather or environmental conditions and the
ambient temperature is
within the recommended ambient temperature set forth in the specifications for
such product.
l. Image retention on LCD flat panels.
m.Defects caused by normal wear and tear or otherwise due to normal aging of a
product.
The warranty does not apply to any product where the serial number has been
removed or obliterated. The warranty also does not apply to any product sold
by a reseller to an end user outside of the country where the reseller is
located unless (i) Christie has an office in the country where the end user is
located or (ii) the required international warranty fee has been paid.
The warranty does not obligate Christie to provide any on site warranty
service at the product site location.
PREVENTATIVE MAINTENANCE
Preventative maintenance is an important part of the continued and proper
operation of your product. Please see the Maintenance section for specific
maintenance items as they relate to your product. Failure to perform
maintenance as required, and in accordance with the maintenance schedule
specified by Christie, will void the warranty.
Environmental
The product is designed and manufactured with high-quality materials and
components that can be recycled and reused. This symbol means that electrical
and electronic equipment, at their end-of-life, should be disposed of
separately from regular waste. Please dispose of the product appropriately and
according to local regulations. In the European Union, there are separate
collection systems for used electrical and electronic products. Please help us
to conserve the environment we live in!
Safety Information
- Read this information thoroughly before installing or operating a speaker.
- Read these instructions.
- Keep these instructions.
- Do not install near any heat sources such as radiators, heat registers, stoves, or other devices (including amplifiers) that produce heat.
- Do not use this apparatus near water.
- Do not install the speaker near water where the electrical components can be exposed to moisture. Do not place objects containing liquids, such as vases, on the product.
- Clean only with a dry cloth.
- Do not overpower or underpower speaker systems.
- Use only in accordance with manufacturer’s specifications and installation guidelines.
- Exposure to extremely high noise levels may cause permanent hearing loss. Individuals vary considerably in their susceptibility to noise-induced hearing loss, but nearly everyone will lose some hearing if exposed to sufficiently intense noise for a sufficient time. These are the permissible noise level exposures specified by the United States Occupational Safety and Health Administration (OSHA):
Duration (Consecutive) | Sound Pressure Level (dbA), Slow Responses |
---|---|
8 hrs | 90 |
6 hrs | 92 |
4 hrs | 95 |
3 hrs | 97 |
2 hrs | 100 |
1.5 hrs | 102 |
1 hr | 105 |
30 min | 110 |
≤15 min | 115 |
- According to the OSHA, any exposure in excess of the above permissible limits could result in some hearing loss. Earplugs or protectors to the ear canals or over the ears must be worn when operating this amplification system to prevent permanent hearing loss, if exposure is in excess of the described limits.
- Two people are required to safely lift and install the speaker.
- Speakers and speakers mounted to brackets must be affixed to a suitable structure following all local safety standards and regulations.
- Always install all legally required additional redundant safety straps or cables.
- Install the minimum number of rigging wires (refer to Installation for more details) that are required to suspend the speaker. Observe load ratings and all applicable local safety codes.
- Only use attachments or accessories specified by Christie.
- To reduce the risk of system damage, turn off the power amplifier and then disconnect the speaker wire before performing a repair or maintenance.
- All servicing must be completed by qualified service personnel. Servicing is required when the apparatus has been damaged in any way. For example, liquid has been spilled or objects have fallen onto the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
- Changes or modifications to the product not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Technical support
Technical support for Christie products is available at:
- North and South America: +1-800-221-8025 or Support.Americas@christiedigital.comEurope, Middle East, and Africa: +44 (0) 1189 778111 or Support.EMEA@christiedigital.com
- Asia Pacific: +65 6877-8737 or Support.APAC@christiedigital.com
- Coolux: +49 221 99 512 300 or Support.PandorasBox@christiedigital.com
- Christie Managed Services: +1-800-550-3061 or NOC@christiedigital.com
Introduction
This user manual provides speaker installation, troubleshooting, and
specification information.
Speaker overview
The LA5 articulated coaxial ribbon line array speaker is designed for use as
part of a screen channel in auditoriums with approximately 500 or more seats,
or for use as a corner surround speaker in auditoriums with approximately 500
or more seats when paired with two S215 subwoofers and triamped.
It may also be used for a range of other applications, where vertical coverage
and maximum throw distance are appropriate.
The speaker contains an internal passive crossover, allowing it to operate
with a single channel amplifier. Multiple hardware attachment points on the
speaker allow for multiple installation options.
What’s in the box?
This table lists the components that are shipped with the LA5.
Quantity | Description | Part number |
---|---|---|
1 | Christie LA5 speaker |
or
Christie LA5 speaker with grill| 145-122106-XX
or
145-123107-XX
Warning! Failure to comply with the following could result in death or serious injury.
- Before installation, inspect all components for cracks, deformations, corrosion, and missing or damaged parts that could reduce their installation strength.
- A minimum of two people are required to safely lift and install the speaker.
- Speakers must be affixed to a suitable structure following all local safety standards and regulations.
- Only use attachments or accessories specified by the manufacturer.
Notice. Failure to comply with the following may result in property damage.
- Allow speakers exposed to extremely low temperatures to warm for a minimum of one hour before playing them at typical application levels. Failure to comply may result in equipment or property damage.
- Speaker wire affects sound quality. Make sure the speaker wire quality and gauge are appropriate for your application.
Complete the following procedures to install the speaker.
Connect the speaker wire
Notice. Failure to comply with the following may result in property damage.
- The amplifier must be turned off and unplugged before you start this procedure.
- Install the speaker according to the mounting instructions provided in this manual.
- Connect the speaker wire to the positive (A) and negative (B) terminals on the back of the speaker.
Use a #8 spade lug (part number: 145-159106-XX) if you are creating crimped spade lug terminations.A| Positive (+) connection (one of two)
---|---
B| Negative (-) connection (one of two) - Connect the negative and positive speaker wires from the speaker to the corresponding terminals on the amplifier.
- Turn on the amplifier and verify that the speaker is receiving power.
Platform mount the LA5 with two S215 subwoofers
Use the BKT-LA5 and BKS-SUB brackets to install the LA5 speaker and two
S215 subwoofers on a platform.
For mounting instructions, see the Christie Vive Audio BKT-LA5 Bracket User
Manual and Christie Vive Audio BKS-SUB User Manual.
A | LA5 speaker |
---|---|
B | BKT-LA5 bracket |
C | S215 subwoofer |
D | BKS-SUB brackets (1 of 4) |
Fly the LA5 and S215 subwoofer side by side
The LA5 and S215 are independently flown, according to installer best
practices, using seven rigging wires and any legally required redundant safety
cables.
A | S215 subwoofer |
---|---|
B | LA5 speaker |
Fly the LA5 below one or two S215 subwoofers
The S215 subwoofers are flown, according to installer best practices, using
four rigging wires and any legally required redundant safety cables. The LA5
is mounted to the S215 subwoofers with the BKL-LA4 or BKL-LA5 bracket kit.
For mounting instructions see the Christie Vive Audio BKL-LA4 Bracket User
Manual or Christie Vive Audio BKL-LA5 Bracket User Manual.
One subwoofer
A | S215 subwoofer |
---|---|
B | BKL-LA4 bracket (1 of 2) |
C | LA5 speaker |
Two subwoofers
A | S215 subwoofer |
---|---|
B | BKL-LA5 bracket (1 of 2) |
C | LA5 speaker |
Wall mount the LA5
- Remove the four pre-installed M8 button head screws on the back of the speaker.
- Attach the following bracket to the back of the speaker using the four M8 button head screws.
Description| Part number
---|---
Wall mount bracket (MM-120)| 111-693200-XX - Mount the speaker to the wall using the manufacturer documentation provided with the bracket.
A | LA5 speaker |
---|---|
B | Wall mount bracket |
Troubleshooting
Caution! Failure to comply with the following could result in minor or moderate injury or damage.
- Do not service the speaker. All servicing must be completed by qualified service personnel.
The speaker does not function
The speaker is connected to the amplifier, but is not producing any sound.
Resolution
- Verify that the speaker is receiving power from the amplifier.
- Verify that the circuit breaker for the main circuit to the amplifier is closed.
- Reset the circuit breaker. If the AC mains breaker continues to open, check the voltage and amperage of the circuit.
- Verify that the negative and positive speaker wires from the speaker are correctly connected to the terminals on the amplifier.
The speaker sound is degraded
The speaker is powered on and sound is being produced, but it is distorted.
Resolution
- Visually inspect the speaker for deterioration or holes.
- Reduce the output level of the source.
- Verify that the negative and positive speaker wires from the speaker are securely connected to the terminals on the amplifier.
- Verify that there are no missing screws. Replace all screws that you removed during installation.
- Have an authorized dealer complete an audio test (for example, pink noise, frequency sweeps, and content and program material).
There is speaker noise or hiss
The speaker is producing static noise or hiss when powered.
Resolution
- Mute channels, one at a time, to isolate the problem.
- Verify that the cables are in good working condition.
- Reroute audio cables away from AC power and lighting cables.
- Verify correct gain structuring of B Chain and input and output levels of source devices and amplifiers.
- Check the polarity.
Specifications
Audio
Specification | Description |
---|---|
System type | Coaxial articulated line array, ribbon high-frequency drivers, |
two-way, biamplified, single sealed enclosure.
Driver components| Twelve 6 in. ribbon drivers with Neodymium magnets and
twelve 6.5 in. paper/ Kevlar composite cone drivers.
Recommended crossover| Electronic, linear phase, symmetric 2-way.
Mid-frequency: Besse! high pass at 111 Hz, 24 dB/octave High-frequency:
Linkwitz-Riley at 1.5 kHz, 24 dB octave
Frequency responses| 60 Hz – 20 kHz 0 -6 dB
Maximum sound pressure level (SPL)b| Mid-frequency: 135.5 dB, continuous,
147.5 dB, peak High-frequency: 129 dB, continuous, 141 dB, peak 135 dB (AES),
146 dB peak
System coverage| 120° horizontal dispersion, 50° vertical dispersion
Sensitivitya, 1 W/1 m| 103.5 dB (mid-frequency), 102 dB (high-frequency)
Recommended amplifier power| 1500 W – 2150 W (FTC) @ 4 Ohms / Christie CDA3 or
Christie CDAS (depending on application)
Rated impedance| Mid-frequency: 4 Ohms
High-frequency: 3 Ohms (linear impedance through entire audio band)
a Measured at distances of 4m and 8m, in free field and on ground plane.
Sensitivity is calculated based on measured SPL response averaged in the 200
Hz-3 kHz range and scaled back to 1 m.
b AES refers to the AES2-2012 standard. IEC refers to the IEC 60268-5
standard. Maximum continuous SPL is calculated based on sensitivity and AES
power handling. IEC short-term power is tested using IEC pink noise with a 9
dB crest factor. The crest factor was specifically increased to reflect real
life parameters of digital cinema soundtracks. Maximum peak SPL is calculated
using peak voltage during the IEC short-term power test.
c Averaged in the 500 Hz-16 kHz range, at -6 dB. Screen scattering effect
results in a slight increase of coverage at high frequency.
Connections
Specification | Description |
---|---|
Inputs | Screw terminal barrier strip |
Power
Specification | Description |
---|---|
Power handlingb | Mid-frequency: 1500W (AES), 2000W (IEC) long term, 3000W |
(IEC) short term
High-frequency: 500W (AES), 1500W (IEC) short term
Physical
Specification | Description |
---|---|
Enclosure | Closed box alignment |
18mm marine plywood
Heavily damped and braced
Dimensions (H x W x D)| 188.8 cm x 26.8 cm x 40 cm
(74.3 in.) x (10.6 in.) x (15.7 in.)
Weight (net)| 53 kg (117 lb)
Parts
Specification | Description |
---|---|
6.5 in. woofer | 003-121023-XX |
6 in. ribbon driver | 003-121021-XX |
Accessories
Specification | Part Number |
---|---|
Christie Vive Audio S215 Subwoofer | 145-103105-XX |
BKT-LA5 Tilt Bracket (for mounting on two Christie S215 subwoofers) |
145-136101-XX
BKL-LA5 “L” Bracket (for flying under two Christie S215 subwoofers)|
145-137102-XX
BKL-LA4 “L” Bracket (for flying under one Christie S215 subwoofer)|
145-147103-XX
BKS-SUB bracket (for platform mounting)| 145-110103-XX
Wall mount bracket (MM-120)| 111-693200-XX
4x fly cables and hardware| 111-685201-XX
lx fly cables and hardware| 111-686202-XX
SpeakON Connector (for amplifier output to speaker)| 145-158105-XX
8 Spade Lug (for speaker input from amplifier)| 145-159106-XX
Corporate offi ces
USA – Cypress
ph: 714-236-8610
Canada – Kitchener
ph: 519-744-8005
Consultant offi ces
Italy
ph: +39 (0) 2 9902 1161
Worldwide offi ces
Australia
ph: +61 (0) 7 3624 4888
Brazil
ph: +55 (11) 2548 4753
China (Beijing)
ph: +86 10 6561 0240
China (Shanghai)
ph: +86 21 6278 7708| Eastern Europe and
Russian Federation
ph: +36 (0) 1 47 48 100
France
ph: +33 (0) 1 41 21 44 04
Germany
ph: +49 2161 664540| India
ph: +91 (080) 6708 9999
Japan (Tokyo)
ph: 81 3 3599 7481
Korea (Seoul)
ph: +82 2 702 1601
Republic of South Africa
ph: +27 (0)11 510 0094| Singapore
ph: +65 6877-8737
Spain
ph: +34 91 633 9990
United Arab Emirates
ph: +971 4 3206688
United Kingdom
ph: +44 (0) 118 977 8000
---|---|---|---
**** For the most current technical documentation, please visit www.christiedigital.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>