CHRISTIE DWU760-iS Inspire Series WUXGA 1DLP Projectors User Guide

: June 4, 2024
: CHRISTIE

Table of Contents

CHRISTIE DWU760-iS Inspire Series WUXGA 1DLP Projectors
Important Safety Information
Important safeguards
Installation safety and warning guidelines
Power requirements
Technical support for Christie
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

CHRISTIE DWU760-iS Inspire Series WUXGA 1DLP Projectors

CHRISTIE-DWU760-iS-Inspire-Series-WUXGA-1DLP-Projectors-
product

Important Safety Information

Read this document carefully before installing or operating Inspire Series WUXGA projectors. Store the document in a location close to the projectors for future reference.
Product Documentation
For installation, setup, and user information, see the product documentation available on the Christie Digital Systems USA Inc. website at www.christiedigital.com. Read all instructions before using or servicing this product.

Access the documentation from the Christie website:
- Go to this URL: https://bit.ly/3fXJcI3 or https://www.christiedigital.com/products/projectors/all-projectors/inspire-series/
- Scan the QR code using a QR code reader app on a smartphone or tablet.
On the product page, select the model and switch to the Downloads tab.

Related Documentation
Additional information on the projector is available in the following documents.

Christie Inspire Series Installation and Setup Guide (P/N: 020-001933-XX)
Christie Inspire Series User Guide (P/N: 020-001934-XX)
Christie Inspire Series Service Guide (P/N: 020-001935-XX)
Christie Inspire Series Serial API Command Guide (P/N: 020-103542-XX)

Notation
Learn the hazard and information symbols used in the product documentation.

Danger messages indicate a hazardous situation which, if not avoided, results in death or serious injury.
Warning messages indicate a hazardous situation which, if not avoided, could result in death or serious injury.
Caution messages indicate a hazardous situation which, if not avoided, could result in minor or moderate injury.
Notice messages indicate a hazardous situation which, if not avoided, may result in equipment or property damage.
Information messages provide additional information, emphasize or provide a useful tip.

Product labels
Learn about the labels that may be used on the product. Labels on your product may be yellow or black and white.
General hazards
Hazard warnings also apply to accessories once they are installed in a Christie product that is connected to power

Fire and Shock Hazard

To prevent fire or shock hazards, do not expose this product to rain or moisture. Do not alter the power plug, overload the power outlet, or use it with extension cords.
Do not remove the product enclosure. Only Christie-qualified technicians are authorized to service the product.

Electrical Hazard

Risk of electric shock.
Do not remove the product enclosure. Only Christie-qualified technicians are authorized to service the product.

Notice! If not avoided, the following could result in equipment or property damage. General hazard.3

Electrical labels

Indicates the presence of earth ground.

Laser Labels

This projector has been classified as Class 1 Laser Product-Risk Group 2 according to the IEC 60825-1:2014 and IEC 62471- 5:2015 standard. Indicates a light hazard. Do notlook directly into the lens. Extreme high brightness can cause permanent eye damage. Class 1 Laser Product-Risk Group 2 according to Class 1 IEC 60825-1:2014 and IEC 62471-5:2015.
Mount above the heads of children. The use of a ceiling mount is recommended with this product to place it above the eyes of children.

Additional safety hazard

Do not look directly into the lens. The extremely high brightness can cause permanent eye damage. Make sure to adjust the feet of the top projector before stacking to avoid damage to the lower projector.

Important safeguards

To prevent personal injury and to protect the device from damage, read and follow these safety precautions. This projector is intended for use in a non- cinema environment.
Safety and warning guidelines
Read all safety and warning guidelines before installing or operating the projector.

Warning! If not avoided, the following could result in death or serious injury.

Do not expose the product to moisture.
Do not operate the product without all of its covers in place.
FIRE HAZARD! Keep hands, clothes, and all combustible material away from the concentrated light beam of the projector.
TRIP OR FIRE HAZARD! Position all cables where they cannot contact hot surfaces, be pulled, be tripped over, or damaged by persons walking on or objects rolling over the cables.
SHOCK HAZARD! Disconnect the product from AC before installing, moving, servicing, cleaning, removing components, or opening any enclosure.
OPTICAL RADIATION HAZARD! Disconnect the power plug from the AC outlet if the product is not being used for an extended period of time.
Do not allow anything to rest on the power cord.
Always provide proper ventilation for the product to prevent overheating.

Caution! If not avoided, the following could result in minor or moderate injury

Only Christie-qualified technicians are permitted to open product enclosures.
All procedures must be performed by Christie-qualified technicians

Notice! If not avoided, the following could result in equipment or property damage.

Always use a lens plug when installing or moving the product. This prevents contaminants from entering the product.
Only use cleaning solutions recommended by Christie. All other cleaning solutions may cause product damage and will void the warranty.

Installation safety and warning guidelines

Read all installation safety and warning guidelines before installing the projector.

Warning! If not avoided, the following could result in death or serious injury.

High leakage current is present when connected to IT power systems.

Caution! If not avoided, the following could result in minor or moderate injury.

ELECTRICAL and BURN HAZARD! Use caution when accessing internal components.
Only Christie-qualified technicians are authorized to use the tools provided in the toolbox.

AC/power precautions
Read all AC/power precautions before installing or operating the projector.

Warning! If not avoided, the following could result in death or serious injury

FIRE HAZARD! Do not use a power cord, harness, or cable that appears damaged.
FIRE OR SHOCK HAZARD! Do not overload power outlets and extension cords.
SHOCK HAZARD! Only use the AC power cord provided with the product or recommended by Christie.
FIRE AND SHOCK HAZARD! Do not attempt operation unless the power cord, power socket, and power plug meet the appropriate local rating standards.
SHOCK HAZARD! Do not attempt operation if the AC supply is not within the specified voltage and current, as specified on the license label.
SHOCK HAZARD! The AC power cord must be inserted into an outlet with grounding.
SHOCK HAZARD! Disconnect the product from AC before installing, moving, servicing, cleaning, removing components, or opening any enclosure.
Install the product near an easily accessible AC receptacle.

Laser safety precautions
This product is classified as Class 1 Laser Product-Risk Group 2 according to IEC 60825-1:2014 and complies with FDA regulations 21 CFR 1040.10 and 1040.11 as a RiskGroup 2, LIP (Laser Illuminated Projector) as defined in IEC 62471:2006 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007.

Warning! If not avoided, the following could result in death or serious injury

This projector has a built-in Class 4 laser module. Never attempt to disassemble or modify the projector.
Any operation or adjustment not specifically instructed in the User manual creates the risk of hazardous laser radiation exposure.
Do not open or disassemble the projector as this may cause damage or exposure to laser radiation.
Do not stare into the beam when the projector is on. The bright light may result in permanent eye damage.
When turning on the projector, make sure no one within the projection range is looking into the lens.
Follow the control, adjustment, or operating procedures to avoid damage or injury from exposure of laser radiation.
The instructions for the assembly, operation, and maintenance include clear warnings concerning precautions to avoid possible exposure to hazardous laser radiation.