CRESTRON HT-CAM HomeTime Video Conference System User Manual

CRESTRON HT-CAM HomeTime Video Conference System

The Crestron HomeTime video conferencing system (HT-CAM) supports at-home Zoom Rooms™ meetings. The HT-CAM can function as a standalone system, or it can be integrated into an existing Crestron® control system with or without DM NVX® technology. The Crestron HomeTime add-a-room upgrade (HT-CAM-AUX) provides the necessary devices for multi-room video conferencing. The upgrade must be used in a Crestron HomeTime system (HT-CAM) that utilizes DM NVX technology.

Minimum Requirements:
Standalone System

• A video display, connected to the UC-ENGINE-SD-Z
• A Zoom Rooms™ software account or activation code
• Tablet device with the Zoom Rooms controller app installed

NOTE: For compatible tablet devices, refer to Zoom Rooms Controller Requirements at System Requirements for Zoom Rooms.

Integrated System

• Existing Crestron control system installation
• Control device such as a TSR- series remote, TSW- series touchpanel, or mobile device running either the custom user interface provided or another compatible custom user interface

Integrated System with DMNVX technology

• Existing Crestron control system installation that utilizes DM NVX with a DM-NVX-350 or DM-NVX-351 to connect to the UC Engine
• A second video display
• Control device such as a TSR- series remote, TSW- series touchpanel, or mobile device running either the custom user interface provided or another compatible custom user interface

In the Box

• 1 HT-CAM, Crestron HomeTime™ Video Conferencing System for Zoom Rooms™ Software or
• 1 HT-CAM-AUX, Crestron HomeTime™ Video Conferencing System Add-a-Room Upgrade

LOGI-960-001101, USB Camera (HT-CAM and HT-CAM-AUX)

• 1 Logitech® MeetUp Conferencing Camera (6511549)

UC-BRKT-100-SD-Z-ASSY, UC Engine Bracket Assembly (HT-CAM Only)

• 1 UC-BRKT-100-SD-Z-ASSY (6511147)
• 1 Power cord, 6 ft (1.8 m) (2053985)

Mounting Hardware
Accessories (HT-CAM Only)

• 1 CBL-CAT5E-7, CAT5e cable, RJ-45-to-RJ-45, Black, 7 ft (2.1 m) (6509924)
• 1 CBL-USBC-HD-9, USB 3.0 to HDMI® Converter cable, 9 ft (2.7 m) (6510718)

DM-NVX-350, Network AV Encoder/Decoder (HT-CAM-AUX Only)

• 1 DM-NVX-350 (6508251)
• 1 Power Pack, 24 VDC, 2.5 A, 100-240 VAC (2045873)
• 1 Power Cord, 5 ft 10 in. (1.78 m) (2042043)
• 1 Connector, 4-Pin (2003576)
• 2 Connector, 5-Pin (2003577)

Mounting
Mount the Bracket Assembly
To mount the bracket assembly, refer to the UC-BRKT-100-SD-Z-ASSY Quick Start (Doc. 8527).

Mount the DM-NVX-350
To mount the DM-NVX-350, refer to the DM-NVX-350 Quick Start (Doc. 8391).

Connect

1. Remove the connector covers prior to making UC-ENGINE-SD-Z connections on the UC-BRKT-100-SD-Z-ASSY bracket assembly.

2. Connect the UC-BRKT-100-SD-Z-ASSY bracket assembly, LOGI-960-001101 USB camera, and display based on the system types shown below.
   NOTE: In router based control systems such as the CP3N or PRO3, ensure all system devices are connected to the LAN and not the control subnet.
   Integrated and Standalone HT-CAMSystems: When the HT-CAM is connected to a control system, connect the devices as shown below. When the HT-CAM is not connected to a control system, make LAN connections directly from the UC- ENGINE-SD-Z to the home’s network. Integrated HT-CAMSystem with DMNVX: When the HT-CAM is connected to a control system that utilizes DM NVX technology, connect the devices as shown below.

   • Make network, HDMI, and USB connections as shown below.
   • Make HT-CAM and HT-CAM-AUX connections as shown below. If an HT-CAM-AUX is not used, only make the connections specified for the HT-CAM.
     NOTE: When using the HT-CAM-AUX upgrade, only one display in the HT-CAM system can be used to video conference at a time.

3. Connect control peripherals such as TSW- series touch screen, a TSR- series remote, a mobile device, or a tablet (none included) as shown below. In a standalone system, only a tablet running the Zoom Rooms controller app can be used as a control peripheral.
   NOTE: Only TSR- series remotes and iPhone® mobile devices are supported with the Crestron provided module. Other control peripherals, such as a TSW- series touch screen, will require a custom built module. Tablet devices can use the Zoom Rooms controller app.

4. Bundle the cables with the integrated cable tie wraps. The cable tie wraps are reusable.

Complete the Installation
After completing UC-ENGINE-SD-Z connections, secure the connector covers using a #1 Phillips head screwdriver to replace the screws.

NOTE: For additional security, replace the screws with the spanner screws included with the bracket assembly. A 1/4 in. bit is also supplied with the bracket assembly to install the spanner screws.

Configure
Apply Power
Press the power button on the UC-ENGINE-SD-Z and apply power to all of the other devices in the system.

Configuring the System
For system configuration, refer to the Crestron HomeTime™ Video Conferencing System Product Manual (Doc. 8760).

Visit the Product Page
Scan the QR code to visit the product page.

HT-CAM

www.crestron.com/model/6511547

HT-CAM-AUX

www.crestron.com/model/6511548

Additional Information

Original Instructions
The U.S. English version of this document is the original instructions. All other languages are a translation of the original instructions. Crestron product development software is licensed to Crestron dealers and Crestron Service Providers (CSPs) under a limited nonexclusive, nontransferable Software Development Tools License Agreement. Crestron product operating system software is licensed to Crestron dealers, CSPs, and end-users under a separate End-User License Agreement. Both of these Agreements can be found on the Crestron website at www.crestron.com/legal/software_license_agreement. The product warranty can be found at www.crestron.com/warranty. The specific patents that cover Crestron products are listed at www.crestron.com/legal/patents. Certain Crestron products contain open source software. For specific information, visit www.crestron.com/opensource. Crestron, the Crestron logo, Crestron HomeTime, and DM NVX are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. iPhone is either a trademark or registered trademark of Apple Inc. in the United States and/or other countries. HDMI is either a trademark or registered trademark of HDMI Licensing LLC in the United States and/or other countries. Logitech is either a trademark or registered trademark of Logitech International SA in the United States and/or other countries. Wi- Fi is either a trademark or a registered trademark of Wi-Fi Alliance in the United States and/or other countries. Zoom Rooms is either a trademark or registered trademark of Zoom Video Communications, Inc. in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography.
©2020 Crestron Electronics, Inc.

References

• HT-CAM [Crestron Electronics, Inc.]
• HT-CAM-AUX [Crestron Electronics, Inc.]
• p.widencdn.net/aucqia/mg_qs_uc-brkt-100-sd-z-assy
• p.widencdn.net/i0seob/mg_qs_dm-nvx-350-351-352
• Zoom Rooms system requirements - Zoom Support
• crestron.com/docs/8760
• Patents [Crestron Electronics, Inc.]
• Software License Agreements (Embedded Software and Software Tools) [Crestron Electronics, Inc.]
• HT-CAM [Crestron Electronics, Inc.]
• HT-CAM-AUX [Crestron Electronics, Inc.]
• Standard Terms & Conditions and Warranties [Crestron Electronics, Inc.]

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>