CRESTRON DM-MD8X1-4K-C 4K Scaling Auto-Switcher User Guide
- June 6, 2024
- CRESTRON
Table of Contents
- 4K Scaling Auto-Switcher w/DM 8G+® & HDBaseT® Output
- SPECIFICATIONS
- Video
- Audio – General
- Audio – Microphone Input
- Audio – Source Inputs
- Audio – Analog Line Output
- **Audio – Digital Output
- Connectors – AudioNideo Inputs
- Connectors — Audio/Video Outputs
- Connectors – Control & Power
- Power Requirements
- Environmental
- Enclosure
- Dimensions
- Weight
- DM 8G+ & HDBaseT Maximum Cable Lengths
- MODELS & ACCESSORIES
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
DM-MD8X1-4K-C
4K Scaling Auto-Switcher w/DM 8G+® & HDBaseT® Output
The DM-MD8X1-4K-C from Crestron® provides an ultra-high-definition presentation switcher with advanced features optimally suited for installation in a huddle room, conference room, or classroom. It integrates a multi-format auto-switcher, 4K video scaler, mic preamp, audio DSP, and control interface, all into one compact device that mounts conveniently under a table or in an equipment rack. Built-in Crestron Connect It™ functionality affords a complete collaboration solution that’s easy and affordable to deploy in any meeting space. Built-in DM 8G+® and HDBaseT® connectivity afford a one-wire, long-distance wiring solution for a single display device, or for integration as part of a larger DigitalMedia™ distribution system.
The DM-MD8X1-4K-C works out-of-the-box to provide automatic switching between four HDMI® or VGA sources, plus on/off control of the display device. Outputs include HDMI, DM 8G+ or HDBaseT, and balanced stereo audio. Built-in 4K scaling ensures the highest possible image quality and compatibility with the widest range of sources and displays. Easy web browser setup allows for configuration of the microphone input, audio DSP, and other settings. Centralized monitoring is supported using Crestron Fusion® Cloud, and fully-programmable control can be enabled through integration with a 3-Series Control System®.[1]
Crestron Connect It™
Crestron Connect It is a cost-effective, simple-to-use presentation solution that works seamlessly with the DM-MD8X1-4K-C. Simply add up to four Crestron Connect It Cable Caddies ( TT-100 series [2]) to provide BYOD connectivity and one-touch control for multiple participants around a conference table. Four USB ports on the DM-MD8X1-4K-C provide power and communications for each cable caddy.
- Ultra high-definition, multi-format presentation switcher, scaler, mic preamp, audio DSP, and control interface
- Out of the box Crestron Connect It™ collaboration system functionality
- Supports up to four TT-100 series Crestron Connect It Cable Caddies [2]
- Includes four auto-switching HDMI®, VGA, and stereo analog audio inputs [5]
- Also supports Dual-Mode DisplayPort, DVI, and analog video sources [3,4]
- Input auto-detection configures each input automatically
- QuickSwitch HD™ technology manages HDCP keys for fast, reliable switching
- Performs automatic AV signal format management via EDID
- Provides adjustable input level compensation on each audio input
- Includes a single microphone input with EQ, gating, and compression
- Provides parallel HDMI and DM 8G+ outputs for one or more display devices
- DigitalMedia 8G+® connectivity enables long-distance wiring over CAT type twisted pair cable [8]
- Integrates with DigitalMedia™ matrix switchers to allow facility-wide signal distribution [9]
- HDBaseT Certified — Enables direct connection to other HDBaseT certified equipment
- Features a built-in, high-performance 4K scaler
- Upscales input signals to match the native resolution of any screen — including 4K and Ultra HD displays!
- Downscales 4K, UHD, and ultra high-resolution computer signals to fit 1080p and other lower-resolution displays
- Handles any input resolution from standard NTSC 480i or PAL 576i, to UHD and 4K
- Provides intelligent frame rate conversion, content-adaptive noise reduction, and motion-adaptive de-interlacing
- Provides 3D to 2D signal conversion, and passes 3D video (without scaling) to 3D displays [6]
- Provides a balanced stereo audio output with graphic EQ, limiting, and delay
- Enables analog-to-HDMI audio embedding and de-embedding [5]
- Handles Dolby® TrueHD, Dolby Atmos®, DTS-HD®, and uncompressed 7.1 linear PCM audio [7]
- Includes onboard IR and RS-232 control ports [10]
- Supports universal remotes via built-in RC-5 compatible IR receiver [10]
- Provides a 10/100 Ethernet LAN connection
- Includes front panel controls for switching and volume adjustment
- Includes customizable front panel label strips
- Allows complete AV setup and adjustment via a web browser
- Fully controllable over Ethernet from a Crestron® 3-Series Control System® [1]
- Communicates natively with Crestron Fusion® Cloud
- Features an internal universal power supply for worldwide compatibility
- Furnishes power over DM® or HDBaseT for PoDM/PoH-powered devices
- Mounts under the table or in a single 19″ rack space
DM-MD8X1-4K-C — Rear View
4K Ultra HD
The DM-MD8X1-4K-C handles 4K and Ultra HD video signals, which is essential to
ensure support for the latest generation of computers and monitors with native
resolutions beyond 1080p and WUXGA.
Multi-Format Auto-Switcher
The DM-MD8X1-4K-C provides high-performance automatic switching between four
groups of inputs, each including HDMI, VGA, and unbalanced stereo audio. The
HDMI inputs are compatible with DVI and Dual-Mode DisplayPort sources [3], and
the VGA inputs can handle RGB, composite, S-Video, and component video sources
[4]. Digital audio is supported by the HDMI inputs, plus each analog audio
input may be used in combination with its corresponding VGA or HDMI video
input.[5] Input auto-detection eliminates the need to configure the inputs —
simply connect your source and the DM-MD8X1-4K-C selects the right audio and
video combination. The switched video signal is routed to one HDMI output and
one DM 8G+ output simultaneously. The DM 8G+ output is compatible with
HDBaseT.
4K Scaler
With its high-performance 4K video scaler on board, the DM-MD8X1-4K-C ensures
an optimal image from every video source on practically any display device. It
allows SD, HD, and all types of computer sources to look their best on Ultra
HD and 4K displays, and it allows sources with resolutions above HD 1080p to
be viewed reliably on 1080p and lower resolution displays. It accepts any
input resolution, from standard definition NTSC 480i to ultra-high-definition
4K DCI, and scales it perfectly to match the native resolution of any screen
up to 4K DCI (4096 x 2160). Interlaced sources are converted to progressive
scans using motion-adaptive deinterlacing. Intelligent frame rate conversion
enables support for 24p and PAL format sources. And, 3D to 2D conversion
allows 3D content to be viewed on 2D-only displays.[6] The output of the
scaler feeds both the HDMI and DM 8G+ outputs.
Flexible Audio Outputs
The switched audio signal is routed to the HDMI output as well as to a
separate balanced analog audio output, with individual-level adjustments
provided for each output. The HDMI output signal is also fed simultaneously to
the DM 8G+ output. All inputs and outputs support stereo audio, with the
option to configure the analog output for mono. Dolby® TrueHD, Dolby Atmos®,
DTS-HD®, and 7.1 linear PCM audio signals can also be routed through the HDMI
inputs and output, as well as the DM 8G+ output.[7]
Professional Audio DSP
The analog audio output includes professional digital signal processing,
allowing the signal to be adjusted for optimum performance and sound quality.
The analog output is ideally designed to be connected to an external power
amplifier and used to drive a set of ceiling or wall mount speakers. In
addition to volume, bass, treble, and mute controls, the DSP provides 10-band
graphic equalization, fully-adjustable limiting, and up to 80 ms of delay. All
settings are adjustable using the DM-MD8X1-4K-C’s web browser user interface
for easy setup. The output volume level is also adjustable using the front
panel volume knob.
Microphone Input with DSP
A full-featured microphone preamp is included to support the connection of a
single wired or wireless mic. Advanced features include fully-adjustable
gating and compression, 4-band semi-parametric EQ, and switchable 48V phantom
power. The microphone signal can be routed to the analog output, the digital
output (HDMI and DM 8G+), or both, with separate level adjustments provided
for each.
DigitalMedia 8G+®
Its DM 8G+ output endows the DM-MD8X1-4K-C with great potential for connecting
to a display device and integrating with larger systems. DM 8G+ provides a
true one-wire interface for transporting ultra-high-definition video, audio,
control, power, and networking signals over CAT-type cable at distances up to
330 feet (100 meters).[8,9] Connecting a DM 8G+ receiver to the DM 8G+
output provides a streamlined AV and control interface for a single projector
or flat panel display located anywhere in the room. DM 8G+ can also provide
the interface to a centralized DigitalMedia matrix switcher, allowing the
DM-MD8X1-4K-C’s output signal to be distributed to multiple displays anywhere
in the same room, other rooms, other buildings, or around the world.
HDBaseT® Certified
Crestron DM 8G+ technology is designed using HDBaseT Alliance specifications,
ensuring interoperability with other HDBaseT certified products. Via DM 8G+,
the DM-MD8X1-4K-C can be connected directly to an HDBaseT compliant display
device without requiring a DM 8G+ receiver.
EDID Format Management
The DM-MD8X1-4K-C provides comprehensive management of the EDID (Extended
Display Identification Data) information that passes between display devices
and input sources, ensuring that each source gets displayed at its optimal
resolution and format. Most applications require no changes to the default
settings. For applications requiring custom configuration, the DM-MD8X1-4K-C
allows for easy assessment of each device’s format and resolution
capabilities, with the ability to configure signals appropriately for the most
desirable and predictable behavior.
QuickSwitch HD™ Technology
Handling digital media signals means handling HDCP (High-bandwidth Digital
Content Protection), the encryption scheme used by content providers to
protect their DVDs, Blu-ray™ discs, and broadcast signals against unauthorized
copying. Viewing HDCP encrypted content requires a source device to
“authenticate” each display and signal processor in the system and issue it a
“key” before delivering an output signal. Crestron QuickSwitch HD manages
these keys to ensure fast, reliable switching and immunity to “blackouts,”
whether using a single display or distributing to multiple displays through a
larger DigitalMedia system.
Embedded Device Control
The DM-MD8X1-4K-C includes built-in IR and RS-232 control ports, which may be
utilized through integration with a Crestron 3-Series Control System to enable
programmable control of local AV equipment and other devices. Some video
devices can also be controlled through their HDMI or HDBaseT connections using
CEC (Consumer Electronics Control). Without a control system, control
capability is limited to turning a single display device on and off via CEC,
RS-232, or Ethernet-based on the detection of an active video signal.[1,10]
Note: For a version of the DM-MD8X1-4K-C with the built-in 3-Series Control system, see model DMPS3-4K-100-C.
SPECIFICATIONS
Communications
Ethernet: 10/100 Mbps, auto-switching, auto-negotiating, auto-discovery,
full/half-duplex, DHCP
USB: USB host ports for Crestron Connect It devices and firmware update
via USB flash drive; USB device port for computer console (setup)
RS-232: 2-way device control and monitoring up to 115.2k baud with
hardware and software handshaking [10] IR/Serial: 1-way device control via
infrared up to 1.2 MHz or serial TTL/RS-232 (0-5 Volts) up to 115.2k baud;
built-in RC-5 compatible IR receiver [10] DigitalMedia™: DM 8G+®, HDCP,
EDID, CEC, PoDM, Ethernet [9] HDBaseT®: HDCP, EDID, CEC, PoH, Ethernet
HDMI®: HDCP, EDID, CEC
NOTE: Supports management of HDCP and EDID; supports management of CEC between the connected HDMI and HDBaseT devices and a 3-Series Control System®
Video
Switcher: 8×1 (organized as multi-format 4×1), auto-switching,
autodetecting multi-format digital/analog source inputs, QuickSwitch HDTM
technology
Scaler: 4K video scaler, motion-adaptive deinterlacer, intelligent frame
rate conversion, Deep Color support, 3D to 2D conversion [6], content-adaptive
noise reduction, widescreen format selection (zoom, stretch, maintain aspect-
ratio, or 1:1)
Input Signal Types: HDMI w/Deep Color, 3D, & 4K (DVI & Dual-Mode
DisplayPort compatible [3]); RGB/VGA (RGBHV, RGBS, RGsB); component (YPbPr);
S-Video (Y/C); composite (NTSC, PAL) [4] Output Signal Types: HDMI w/Deep
Color, 3D, & 4K (DVI compatible [3]); DM 8G+ & HDBaseT w/Deep Color, 3D, & 4K
Analog-To-Digital Conversion: 10-bit 165 MHz per each of 3 channels
Maximum Pass-Through Resolutions:
Input Type| Scan Type| Resolution| Frame Rate| Color
Sampling| Color Depth
---|---|---|---|---|---
HDMI| Progressive| 4096×2160 4K DCI or 3840×2160 Ultra HD| 24 Hz| 4:4:4| 30
bit
30 Hz| 4:4:4| 24 bit
30 Hz| 4:2:2| 36 bit
60 Hz| 4:2:0| 24 bit
2560×1600 WQXGA| 60 Hz| 4:4:4| 36 bit
1920×1080 HD1080p| 60 Hz| 4:4:4| 36 bit
Interlaced| 1920×1080 HD1080i| 30 Hz| 4:4:4| 36 bit
RGBNGA| Progressive| 1600×1200 UXGA| 60 Hz| n/a
1920×1200 WUXGA| 60 Hz| n/a
Component
(41
| Progressive| 1920×1080 HD1080p| 60 Hz| n/a
Interlaced| 1920×1080 HD1080i| 30 Hz| n/a
Composite or S-Video ml| Interlaced| 480i NTSC or 576i PAL| 60 Hz| n/a
Maximum Scaler Input Resolutions:
Input Type | Scan Type | Resolution | Frame Rate | Color Sampling | Color Depth |
---|---|---|---|---|---|
HDMI | Progressive | 4096×2160 4K DCI Or 3840×2160 Ultra HD | 24 Hz | 4:4:4 | 30 |
bit
30 Hz| 4:4:4| 24 bit
30 Hz| 4:2:2| 36 bit
2560×1600 WQXGA| 60 Hz| 4:4:4| 36 bit
1920×1080 HD1080p| 60 Hz| 4:4:4| 36 bit
Interlaced| 1920×1080 HD1080i| 30 Hz| 4:4:4| 36 bit
RGBNGA| Progressive| 1600×1200 UXGA| 60 Hz| n/a
1920×1200 WUXGA| 60 Hz| n/a
Component
MI
| Progressive| 1920×1080 HD1080p| 60 Hz| n/a
Interlaced| 1920×1080 HD1080i| 30 Hz| n/a
Composite
or S-Video l41| Interlaced| 480i NTSC
or 576i PAL| 60 Hz| n/a
Maximum Scaler Output Resolutions:
Output Type | Scan Type | Resolution | Frame Rate | Color Sampling | Color Depth |
---|---|---|---|---|---|
HDMI, DM, or HDBaseT | Progressive | 4096×2160 4K DCI or 3840×2160 Ultra HD | 24 | ||
Hz | 4:4:4 | 30 bit | |||
30 Hz | 4:4:4 | 24 bit | |||
30 Hz | 4:2:2 | 36 bit | |||
2560×1600 WQXGA | 60 Hz | 4:4:4 | 36 bit | ||
1920×1080 HD1080p | 60 Hz | 4:4:4 | 36 bit |
NOTE: Common resolutions are shown; other custom resolutions are supported at pixel clock rates up to 300 MHz for digital inputs and outputs, or 165 MHz for analog inputs
Audio – General
Switcher/Mixer: 8×1 (organized as multi-format 4×1) stereo source switcher, auto-detecting digital/analog source inputs, single-channel gated mic preamp w/DSP, two independent mic/source mixers (one for analog output, one for digital outputs), stereo DSP for analog output, 4×1 multichannel source switcher, digital audio mixer bypass mode for multichannel pass-through to digital outputs Microphone input channel:
Analog-To-Digital Conversion: | 24-bit 48 kHz |
---|---|
Digital-To-Analog Conversion: | 24-bit 48 kHz |
Frequency Response: | 20 Hz to 20 kHz ±0.5 dB (digital source); |
20 Hz to 20 kHz ±0.5 dB (analog line source);
20 Hz to 20 kHz ±0.7 dB (microphone source)
S/N Ratio:| 108 dB, 1 kHz, A-weighted (digital source);
103 dB, 1 kHz, A-weighted (analog line source)
THD+N:| <0.002%, 20 Hz to 20 kHz (digital source);
<0.005%, 20 Hz to 20 kHz (analog line source);
<0.05%, 20 Hz to 20 kHz (microphone source)
Stereo Separation:| 108 dB (digital source);
103 dB (analog source)
Audio – Microphone Input
Input Signal Type: Mono analog mic level
Phantom Power: Enable/Disable
Gain: 0 to +60 dB Gain adjustment, plus Mute
EQ Center Frequencies: 50 to 200 Hz (Band 1); 200 to 800 Hz (Band 2); 800
to 3.2k Hz (Band 3); 3.2k to 12.8k Hz (Band 4)
EQ Gain: ±12.0 dB per band
Gating Threshold: -80 to 0 dB
Gating Depth (Attenuation): -80 to 0 dB
Gating Attack: 1 to 250 ms
Gating Release: 1 to 1000 ms
Gating Hold: 1 to 200 ms
Compression Threshold: -80 to 0 dB
Compression Ratio: 1:1 to 10:1
Compression Attack: 1 to 250 ms
Compression Release: 1 to 1000 ms
Compression Hold: 1 to 200 ms
Compression Curve: Hard or soft knee
Audio – Source Inputs
Typical of 8 source input channels (Audio Inputs 1 — 4 & HDMI Inputs 1 — 4)
Input Signal Types: Analog 2-channel [51, HDMI (Dual-Mode DisplayPort
compatible [3])
Analog Formats: Stereo 2-channel
Digital Formats: Dolby Digital®, Dolby Digital EX, Dolby Digital Plus,
Dolby® TrueHD, Dolby Atmos®, DTS®, DTS-ES, DTS 96/24, DTS-HD High Res, DTS-HD
Master Audio’TM, LPCM up to 8 channels in
Input Compensation: ±10.0 dB M
Audio – Analog Line Output
Output Signal Type/Format: Stereo 2-channel
Mic: -80 to +10 dB Level adjustment range, plus Mute and Pan Source: -80
to +10 dB Level adjustment range, plus Mute and Balance
Master Volume: -80 to +10 dB Level adjustment range, plus Mute and Mono
Bass: ±12.0 dB
Treble: ±12.0 dB
Equalization: 10-band graphic
GEQ Center Frequencies: 31.5, 63, 125, 250, 500, 1k, 2k, 4k, 8k, 16k Hz
GEQ Gain: ±12.0 dB per band
Delay: 0.0 to 80.0 ms
Limiter Threshold: -80 to 0 dBz
Limiter Ratio: 1:1 to 10:1
Limiter Attack: 1 to 250 ms
Limiter Release: 1 to 1000 ms
Limiter Curve: Hard or soft knee
**Audio – Digital Output
**
Output Signal Types: HDMI, DM 8G+ & HDBaseT
Formats: Dolby Digital, Dolby Digital EX, Dolby Digital Plus, Dolby
TrueHD, Dolby Atmos, DTS, DTS-ES, DTS 96/24, DTS-HD High Res, DTS-HD Master
Audio, LPCM up to 8 channels in
Mic: -80 to +10 dB Level adjustment range, plus Mute and Pan In Source:
-80 to +10 dB Level adjustment range, plus Mute and Balance Master Volume: -80
to +10 dB Level adjustment range, plus Mutein
Connectors – AudioNideo Inputs
VGA IN 1- 4: (4) HD15 female;
Analog VGA/RGB/video inputs;
Signal Types: VGA, RGB, component, S-Video, or composite 141;
Formats: RGBHV, RGBS, RGsB, YPbPr, Y/C, NTSC or PAL;
Input Level: 0.5 to 1.5 Vp-p with built-in DC restoration;
Input Impedance: 75 Ohms nominal;
Sync Detection: RGBHV, RGBS, RGsB, YPbPr;
Sync Input Level: 3 to 5 Vp-p;
Sync Input Impedance: 2.2k Ohms
AUDIO IN 1 — 4: (4) 3.5 mm TRS mini phone jacks;
Unbalanced stereo line-level analog audio inputs;
Input Impedance: 32k Ohms unbalanced;
Maximum Input Level: 2.8 Vrms unbalanced;
Note: If an HDMI input is selected but no digital audio signal is detected, the corresponding analog audio input is activated (AUDIO 1 for HDMI 1, etc.). Please note, the analog audio inputs do not pass audio if the HDMI video input resolution is higher than 1920×1200.
HDMI IN 1 – 4: (4) 19-pin Type A HDMI female; Digital video/audio inputs;
Signal Types: HDMI, DVI, or Dual-Mode DisplayPort13,4]
MIC IN: (1) 3-pin 3.5 mm detachable terminal block; Balanced microphone
audio input;
Input Level: -60 to 0 dB, 1 Vrms maximum;
Input Impedance: 6.5k Ohms balanced;
Phantom Power: 48 Volts DC, software-enabled/disabled
Connectors — Audio/Video Outputs
HDMI OUT: (1) 19-pin Type A HDMI female; Digital video/audio output;
Signal Types: HDMI, DVI
DM OUT: (1) 8-pin RJ45 female, shielded;
DM 8G+ output, HDBaseT compliant;
Poll and PoDM PSE (Power Sourcing Equipment) port;
Connects to an HDBaseT device, or to the DM 8G+ input of a DM receiver or
other DM device, via CAT5e, Crestron DM-CBL-8G, or Crestron DM-CBL-ULTRA cable
[8s]
AUDIO OUT: (1) 5-pin 3.5 mm detachable terminal block;
Balanced/unbalanced stereo line-level audio output;
Output Impedance: 200 Ohms balanced, 100 Ohms unbalanced;
Maximum Output Level: 4 Vrms balanced, 2 Vrms unbalanced
Connectors – Control & Power
IR OUT: (1) 3.5 mm mini-phone jack, IR/Serial output port001; IR output
up to 1.2 MHz;
1-way serial TTURS-232 (0-5 Volts) up to 115.2k baud
COM: (1) 5-pin 3.5 mm detachable terminal block;
Bidirectional RS-232 port 001;
Up to 115.2k baud, hardware and software handshaking support
LAN: (1) 8-pin RJ45 female; 10Base-T/100Base-TX Ethernet port
USB 1 — 4: (4) USB Type-A female;
USB 2.0 host ports for TT-100 series Crestron Connect It Cable Caddies 121;
Also enables firmware update via USB flash drive
G: (1) 6-32 screw, chassis ground lug 100-240V-1.4A 50/60Hz: (1) IEC 60320 C14 main power inlet; Mates with removable power cord, included COMPUTER (front): (1) USB Type B female; USB computer console port; For setup only
IR IN (front): (1) Infrared sensor00];
IR Frequency: 36 to 38 kHz;
IR Formats: Crestron format, RCS;
Allows control from IR wireless remotes using the Crestron or RC-5 command
sets
Controls & Indicators
PWR: (1) Bi-color green/amber LED, indicates operating power supplied from AC line power, turns amber while booting and green when operating
MSG: (1) Red LED, indicates internal control system has generated an
error message
HW-R: (1) Recessed pushbutton for hardware reset, reboots the control
system
SW-R: (1) Recessed pushbutton for software reset, restarts the software
program
AUTO INPUT SELECT: (1) Pushbutton and bi-color green/amber LED, select
the auto-switching mode
VGA INPUT SELECT 1 – 4: (4) Pushbuttons for manual input selection, and
(4) bi-color green/amber LEDs to indicate the currently active input and
signal presence at each corresponding VGA input
HDMI INPUT SELECT 1 – 4: (4) Pushbuttons for manual input selection, and
(4) bi-color green/amber LEDs to indicate the currently active input and
signal presence at each corresponding HDMI input
VOLUME: (1) Continuous turn rotary encoder, adjusts the analog audio
output volume
DM OUT (rear): (2) LEDs, green LED indicates DM link status, amber LED
indicates video and HDCP signal presence, for the DM output
LAN (rear): (2) LEDs, bi-color LED (left) indicates Ethernet speed and
activity, the green LED (right) indicates Ethernet link status
Power Requirements
Main Power: 1.4 Amps @ 100-240 Volts AC, 50/60 Hz
Power Consumption: 36 Watts typical, 26 Watts idle
Power over HDBaseT (PoH): PoH PSE (Power Sourcing Equipment), each DM 8G+
port supplies up to 15.4W (Class 0-3) to one PoH PD (Powered Device)
Power over DM (PoDM): PoDM PSE (Power Sourcing Equipment), each DM 8G+
port supplies up to 15.4W (Class 0-3) to one PoDM PD (Powered Device)
Environmental
Temperature: 41° to 104° F (5° to 40° C)
Humidity: 10% to 90% RH (non-condensing)
Heat Dissipation: 122 BTU/hr typical, 89 BTU/hr idle
Enclosure
Chassis: Metal, black finish, fan-cooled, vented sides
Front Panel: Metal, black finish with polycarbonate label overlay
Mounting: Freestanding, 1 RU 19-inch rackmount, or under-table mount
(adhesive feet, rack ears, and under-table mounting brackets included)
Dimensions
Height: 1.74 in (45 mm) without feet
Width: 17.28 in (439 mm); 18.94 in (482 mm) with rack ears
Depth: 10.47 in (266 mm)
Weight
6.4 lb (2.9 kg)
DM 8G+ & HDBaseT Maximum Cable Lengths
Cable Type: Resolution:| DM-CBL-ULTRA DM® Ultra Cable| DM-CBL-8G
DM 8G® Cable| CAT5e (or better) UTP or STP [8]
---|---|---|---
1080p60 Full HD| 330 ft (100 m)| 330 ft (100 m)| 330 ft (100 m)
1920×1200 WUXGA
1600×1200 UXGA
2048×1080 2K DCI
2560×1440 WOHD| 230 ft go m)| 165 ft (50 m)
2560×1600 WIRGA
3840×2160 Ultra HD
4096×2160 4K DCI
MODELS & ACCESSORIES
Available Models
DM-MD8X1-4K-C: 4K Scaling Auto-Switcher w/DM 8G+® & HDBaseT ® Output
Available Accessories
TT-100 Series: Crestron Connect It™ Cable Caddy
AM-100: AirMedia™ Presentation Gateway
MP-AMP30: Media Presentation Audio Amplifier
MP-AMP40 Series: Media Presentation Audio Amplifiers, 70 or 100 Volt AMP
Series: Commercial Power Amplifiers
DM-RMC-4K-100-C-1 G: Wall Plate 4K DigitalMedia 8G+® Receiver & Room
Controller 100
DM-RMC-4K-100-C: 4K DigitalMedia 8G+ Receiver & Room Controller 100
DM-RMC-4K-SCALER-C: 4K DigitalMedia 8G+ Receiver & Room Controller
w/Scaler
DM-RMC-4K-SCALER-C-DSP: 4K DigitalMedia 8G+– Receiver & Room Controller
w/Scaler & Downmixing
DM-RMC-200-C: DigitalMedia 8G+”’) Receiver & Room Controller 200 DM-RMC-
SCALER-C: DigitalMedia 8G-Ft-.) Receiver & Room Controller w/Scaler
STIRP: IR Emitter Probe w/3.5mm Mini Phone Plug
CNSP-XX: Custom Serial Interface Cable
Crestron Fusion®: Enterprise Management Platform DM-CBL-ULTRA-NP:
DigitalMedia” Ultra Cable, Non-Plenum Type CMR DM-CBL-ULTRA-P: DigitalMedia
Ultra Cable, Plenum Type CMP DM-CBL-ULTRA-LSZH: DigitalMedia m Ultra Cable,
Low Smoke Zero Halogen
DM-CONN: Connector for DM-CBL-ULTRA
DM-CBL-8G-NP: DigitalMedia 8G1° Cable, non-plenum
DM-CBL-8G-P: DigitalMedia 8G’° Cable, plenum
DM-8G-CONN: Connector for DM-CBL-BG
DM-8G-CRIMP: Crimping Tool for DM-8G-CONN
DM-8G-CONN-WG: Connector with Wire Guide for DM-CBL-8G DM-8G-CRIMP-WG:
Crimping Tool for DM-8G-CONN-WG
CBL Series: Crestron® Certified Interface Cables
MP-WP Series: Media Presentation Wall Plates
MPI-WP Series: Media Presentation Wall Plates – International Version
Notes:
- Compatible with 3-Series® control systems only. Not compatible with 2-Series or prior generation control systems.
- Item(s) sold separately.
- HDMI requires an appropriate adapter or interface cable to accommodate a DVI or Dual-Mode DisplayPort signal. CBL-HD-DVI interface cables are available separately.
- The VGA inputs can accept component, composite, and S-Video signals using an appropriate adapter (not included). However, input sync detection is not provided for composite or S-Video signal types.
- When using an analog audio input in combination with an HDMI video input, the source’s video resolution must be 1920×1200 or lower. The analog audio input will not pass audio if the source’s video resolution is higher than 1920×1200.
- Automatically passes 3D video if the display device supports it (reverts to pass-through mode without scaling). Provides automatic 3D-to-2D conversion (with scaling) if the display device does not support 3D.
- Routing of a multichannel audio signal via a digital input and output (HDMI, HDBaseT, or DM) requires the input to be set for “mixer bypass” mode. When that input is selected, all audio controls on the digital output are disabled and the ability to route the microphone signal to that output is defeated. Mixer bypass mode also disables the Input Compensation control on that input.
- The maximum cable length for DigitalMedia 8G+ (DM 8G+) or HDBaseT is dependent upon the type of cable and resolution of the video signal. Refer to the “DM 8G+ & HDBaseT Maximum Cable Lengths” table for a detailed overview. Crestron legacy cable models DM-CBL DigitalMedia Cable and DM-CBL-D DigitalMedia D Cable support the same resolutions and cable lengths as CAT5e. Shielded cable and connectors are recommended to safeguard against unpredictable environmental electrical noise which may impact performance at resolutions above 1080p. Refer to the Crestron DigitalMedia Design Guide, Doc. #4546 for complete system design guidelines. DM 8G+ is compatible with HDBaseT Alliance specifications for connecting to HDBaseT compliant equipment. All wire and cables are sold separately.
- The DM-MD8X1-4K-C cannot connect to an Ethernet LAN over a DM connection. It must be connected using its onboard LAN port. Ethernet over DM is only utilized on the DM-MD8X1-4K-C for connecting a single DM receiver
- When used without a control system, the IR OUT port and IR IN sensor are not utilized, and the COM port supports only basic display device control. The IR OUT port, IR IN sensor, and COM port may all be utilized for fully-customizable applications through integration with an external 3-Series Control System with custom programming.
This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/saIesreps or by calling 800-237-2041.
The specific patents that cover Crestron products are listed online at patents.crestron.com.
Certain Crestron products contain open-source software. For specific information, please visit www.crestron.com/opensource.
Crestron, the Crestron logo, 3-Series, 3-Series Control System, AirMedia, Crestron Connect It, Crestron Fusion, DigitalMedia, DigitalMedia 8G, DigitalMedia 8G+, DM, DM 8G+, and QuickSwitch HD are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Blu-ray is either a trademark or registered trademark of the Blu-ray Disc Association in the United States and/or other countries. Dolby, Dolby Atmos, and Dolby Digital are either trademarks or registered trademarks of Dolby Laboratories in the United States and/or other countries. DTS, DTS-HD, and DTS-HD Master Audio are either trademarks or registered trademarks of DTS, Inc. in the United States and/or other countries. HDBaseT and the HDBaseT Alliance logo are either trademarks or registered trademarks of the HDBaseT Alliance in the United States and/or other countries. HDMI and the HDMI Logo are either trademarks or registered trademarks of HDMI Licensing LLC in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice.
©2016 Crestron Electronics, Inc.
Crestron Electronics, Inc. 15 Volvo Drive
Rockleigh, NJ 07647
Tel: 800.237.2041 / 201.767.3400
Fax: 201.767.1903
www.crestron.com
All brand names, product names, and trademarks are the property of their
respective owners.
©2016 Crestron Electronics, Inc.
Specifications are subject to change without notice. Revised 04/22/16
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>