CRESTRON AV3 Series Control System Instructions
- June 17, 2024
- CRESTRON
Table of Contents
CRESTRON AV3 Series Control System
Getting Started
Scan the QR code to view the Quick Start Guide available at www.crestron.com/docs/7721.
For additional information on the AV3, visit www.crestron.com/model/6504878.
For additional information on the PRO3, visit www.crestron.com/model/6504880.
Certification and Compliance
regulatory Models: AV3, PRO3
FCC Statement
Federal Communications Commission (FCC) Compliance Statement
This device complies with part 15 of the FCC Rules. Operation is subject to
the following conditions:(1) This device may not cause harmful interference
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
CAUTION: Changes or modifications not expressly approved by the
manufacturer responsible for compliance could void the user’s authority to
operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Industry Canada (IC) Compliance Statement
CAN ICES-3 (B)/NMB-3(B)
As of the date of manufacture, the product has been tested and found to comply with specifications for CE marking.
This product is Listed to applicable UL® Standards and requirements tested by Underwriters Laboratories Inc.
Rack Mounting Safety Precautions
-
Elevated Operating Ambient Temperature: If installed in a closed or multi-unit rack assembly, the operating ambient temperature of the rack environment may be greater than room ambient temperature. Therefore, consideration should be given to installing the equipment in an environment compatible with the maximum ambient temperature (Tma) specified by the manufacturer.
-
Reduced Airflow : Installation of the equipment in a rack should be such that the amount of airflow required for safe operation of the equipment is not compromised.
-
Mechanical Loading: Mounting of the equipment in the rack should be such that a hazardous condition is not achieved due to uneven mechanical loading.
-
Circuit Overloading: Consideration should be given to the connection of the equipment to the supply circuit and the effect that overloading of the circuits might have on overcurrent protection and supply wiring. Appropriate consideration of equipment nameplate ratings should be used when addressing this concern.
-
Reliable Earthing: Reliable earthing of rack-mounted equipment should be maintained. Particular attention should be given to supply connections other than direct connections to the branch circuit (e.g., use of power strips).
Legal
The product warranty can be found at
The specific patents that cover Crestron products are listed at
Certain Crestron products contain open-source software. For specific information, visit
Crestron, the Crestron logo, and 3-Series are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. UL and the UL logo are either trademarks or registered trademarks of Underwriters Laboratories, Inc. in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. ©2020 Crestron Electronics, Inc.
Specifications
Model| Regulatory Model| FCC Compliance| IC Compliance| CE Marking| DocType|
Date
---|---|---|---|---|---|---
AV3/PRO3| AV3, PRO3| Part 15 of the FCC Rules| CAN ICES-3 (B)/NMB-3(B)|
Compliant as of the date of manufacture| 8664A (2055345)| 01/30/20
FAQ
- What should be considered when mounting the AV3/PRO3 in a rack?
- Considerations include ambient temperature, airflow, mechanical loading, circuit overloading, and reliable earthing.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>