CRESTRON DM-NVX-D80-IOAV Best Price Pune Rahi Systems Private User Guide
- June 17, 2024
- CRESTRON
Table of Contents
CRESTRON DM-NVX-D80-IOAV Best Price Pune Rahi Systems Private
Specifications
| Product | DM-NVX-D80-IOAV |
|---|---|
| Description | DM NVXTM 4K60 4:4:4 HDR Network AV OPS Decoder |
The OPS port of the DM-NVX-D80-IOAV is located on the rear panel of the device. When the DM-NVX-D80-IOAV is installed into the OPS slot of a display, the OPS port of the DM-NVX-D80-IOAV connects to the OPS port of the display.
- Disconnect mains power from the display. The DM-NVX-D80-IOAV is not hot-swappable.
- Remove the OPS slot cover on the display by loosening the two slot cover screws. Retain the screws for use in step 4 below.
- With the fan of the DM-NVX-D80-IOAV facing you or the display (display dependent), insert the DM-NVX-D80-IOAV into the OPS slot until the device clicks into place.
- Using the two screws removed in Step 2 and the two mounting holes of the DM-NVX-D80-IOAV, secure the DM-NVX-D80-IOAV in the slot.
- Reconnect mains power to the display.
- Verify that the input source of the display is set to use the DM-NVX-D80-IOAV in the OPS slot.
LED Indicators
| LED Indicator | Colour | Meaning |
|---|---|---|
| PWR | Amber | Power is being applied to the device via the OPS-supported |
display. The device is booting.
SETUP| Green| The SETUP button is pressed. The device is online with a control
system.
OL| Red| Power is being applied to the device via the OPS-supported display.
The device is operational.
NV| Green| The device receives and decodes network video.
LAN| Green| An Ethernet link is established.
LAN| Flashing amber| Data activity is occurring on the Ethernet link.
Configure the Device
- Configure the device using the web interface. To access the web interface, open a web browser and then go to the IP address of the device.
- To log in to the web interface, enter the user name and password. The default user name and password are both admin.
Upgrade the Firmware
- Before using the device, upgrade the firmware. The latest firmware can be downloaded from the DM-NVX-D80-IOAV product page on the Crestron website.
Connect to the Crestron XiO Cloud Service
- The Crestron XiO CloudTM service allows supported Crestron devices across an enterprise to be managed and configured from one central and secure location in the cloud. Supported devices are preconfigured to connect to the service. Use of the service requires a registered Crestron XiO Cloud account.
- For detailed information about using the Crestron XiO Cloud service, refer to the Crestron XiO Cloud Service User Guide (Doc. 8214).
Compliance and Legal
- Regulatory Model: M1848001
- The device complies with part 15 of the FCC Rules. Changes or modifications not approved by the manufacturer could void the user’s authority to operate the equipment.
FAQ
- What is the default IP address for a DM NVX device?
- By default, the IP address is assigned by a DHCP server on the network. If a DHCP server does not exist, it defaults to a link-local address in the 169.254.xxx.xxx range.
- How do I upgrade the firmware of the DM-NVX-D80-IOAV?
- The latest firmware can be downloaded from the DM-NVX-D80-IOAV product page on the Crestron website.
- What should I do if I experience interference with the DM-NVX-D80-IOAV?
- You can try to correct the interference by turning the equipment off and on, increasing the separation between the equipment and receiver, or consulting a professional.
DM-NVX-D80-IOAV
DM NVX™ 4K60 4:4:4 HDR Network AV OPS Decoder
The Crestron® DM-NVX-D80-IOAV is a compact DM NVX™ decoder that is compatible with the Intel® Open Pluggable Specification (OPS). Equipped with an OPS port, the DM-NVX-D80-IOAV is designed for installation into the OPS slot of an OPS- supported display.
Check the Box
| Item | Qty |
|---|---|
| DM-NVX-D80-IOAV | 1 |
Install the Device
- The OPS port of the DM-NVX-D80-IOAV is located on the rear panel of the device. When the
- DM-NVX-D80-IOAV is installed into the OPS slot of a display, the OPS port of the
- DM-NVX-D80-IOAV connects to the OPS port of the display.
- OPS Port of DM-NVX-D80-IOAV (Rear Panel)
To install the DM-NVX-D80-IOAV into an OPS slot of a display:
NOTE: The display shown below is for illustrative purposes only. Your
display may differ from the one shown below. If desired, refer to the OPS
device installation instructions in the display documentation in addition to
the instructions below.
-
Disconnect the main power from the display. The DM-NVX-D80-IOAV is not hot-swappable.
-
Remove the OPS slot cover on the display by loosening the two slot cover screws.
Retain the screws for use in step 4 below. -
With the fan of the DM-NVX-D80-IOAV facing you or the display (display dependent), insert the DM-NVX-D80-IOAV into the OPS slot until the device clicks into place.
-
Using the two screws removed in Step 2 and the two mounting holes of the DM-NVX-D80-IOAV, secure the DM-NVX-D80-IOAV in the slot.
-
Reconnect the main power to the display.
-
Verify that the input source of the display is set to use the DM-NVX-D80-IOAV in the OPS slot.
Installation of DM-NVX-D80-IOAV into OPS Slot of Display
Connect the Device
No external HDMI®, USB, RS-232, and power cables are required to connect to
the DM-NVX-D80-IOAV. Console and Ethernet port connections are made to the
front panel as shown below.
Front Panel Connections
LED Indicators
Refer to the following table for information about the LED indicators on the device.
| LED Indicator | Colour | Meaning |
|---|---|---|
| PWR | Amber | Power is being applied to the device via the OPS-supported |
display. The device is booting.
Green| Power is being applied to the device via the OPS-supported display. The
device is operational.
SETUP| Red| The SETUP button is pressed.
OL| Green| The device is online with a control system.
NV| Green| The device receives and decodes network video.
LAN| Green| An Ethernet link is established.
Flashing amber| Data activity is occurring on the Ethernet link.
Configure the Device
Configure the device using the web interface. To access the web interface,
open a web browser and then go to the IP address of the device.
NOTE: By default, the IP address of a DM NVX device is assigned by a DHCP
server on the network. If a DHCP server does not exist on the network, the IP
address defaults to a link-local address in the 169.254.xxx.xxx range. Refer
to RFC 3927 for detailed information about link-local addressing. To display
the IP address on the connected display, press the SETUP button on the front
panel of the device.
To log in to the web interface, enter the user name and password. The default
user name and password are both admin.
Upgrade the Firmware
Before using the device, upgrade the firmware. The latest firmware can be
downloaded from the
DM-NVX-D80-IOAV product page on the Crestron website
(www.crestron.com).
Connect to the Crestron XiO Cloud Service
The Crestron XiO Cloud™ service allows supported Crestron devices across an
enterprise to be managed and configured from one central and secure location
in the cloud. Supported devices are preconfigured to connect to the service.
Use of the service requires a registered Crestron XiO Cloud account.
To connect the device to the Crestron XiO Cloud service:
- Record the MAC address and serial number that are labelled on the shipping box or front panel of the device. The MAC address and serial number are required to add the device to the Crestron XiO Cloud environment.
- Do either of the following:
- If you have a Crestron XiO Cloud account, go to https://portal.crestron.io to access the
- Crestron XiO Cloud service.
- If you do not have a Crestron XiO Cloud account, go to www.crestron.com/xiocloud to register for an account.
- For detailed information about using the Crestron XiO Cloud service, refer to the Crestron XiO Cloud Service User Guide (Doc. 8214) at www.crestron.com/manuals.
Additional Information
Scan or click the QR code for detailed product information.
FCC STATEMENT
Compliance and Legal
Original Instructions: The U.S.-English version of this document is the
original instructions. All other languages are translation
of the original instructions.
Regulatory Model: M1848001
Federal Communications Commission (FCC) Compliance Statement
This device complies with part 15 of the FCC Rules. Operation is subject to
the following conditions:
- This device may not cause harmful interference and
- this device must accept any interference received, including interference that may cause undesired operation.
CAUTION: Changes or modifications not expressly approved by the
manufacturer responsible for compliance could void the user’s authority to
operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, under part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used under the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Industry Canada (IC) Compliance Statement
- CAN ICES-3 (B)/NMB-3(B)
- As of the date of manufacture, the product has been tested and found to comply with specifications for CE marking.
The Waste Electrical & Electronic Equipment (WEEE) directive marking on a product indicates that it should not be disposed of with general waste. Instead, you are encouraged to reuse or recycle the product under Directive 2012/19/EU of the European Union. Proper disposal of this product will help prevent potential negative effects on the environment and human health, which could otherwise be caused by inappropriate waste handling. Penalties may be applicable for incorrect disposal of this waste, under your national legislation. For information about recycling this product, please contact your waste disposal service, your original distributor, or Crestron.
WARRANTY
The product warranty can be found at
www.crestron.com/warranty.
The specific patents that cover Crestron products are listed at
www.crestron.com/legal/patents.
Certain Crestron products contain open-source software. For specific
information, please visit
www.crestron.com/opensource.
Crestron, the Crestron logo, Crestron XiO Cloud, and DM NVX are either
trademarks or registered trademarks of Crestron Electronics, Inc. in the
United States and/or other countries. HDMI is either a trademark or a
registered trademark of HDMI Licensing LLC in the United States and/or other
countries. Intel is either a trademark or a registered trademark of Intel
Corporation in the United States and/or other countries. Other trademarks,
registered trademarks, and trade names may be used in this document to refer
to either the entities claiming the marks and names or their products.
Crestron disclaims any proprietary interest in the marks and names of others.
Crestron is not responsible for errors in typography or photography. ©2019
Crestron Electronics, Inc.
CONTACT
- Crestron Electronics, Inc.
- 15 Volvo Drive, Rockleigh, NJ 07647
- Tel: 888.CRESTRON
- Fax: 201.767.7576
- www.crestron.com.
Quick Start – Doc. 8526A
- (2054410)
- 10/25/19
- Specifications subject to
- change without notice.
References
- Control Systems for Home Automation, Campus & Building Control by Crestron Electronics [Crestron Electronics, Inc.]
- DM-NVX-D80-IOAV [Crestron Electronics, Inc.]
- Search Results [Crestron Electronics, Inc.]
- XIO Cloud Account Registration [Crestron Electronics, Inc.]
- Sign in to your account
- HD-RX-4K-410-C-E [Crestron Electronics, Inc.]