4ms Company DIY Looping Delay Kit Instructions
- June 17, 2024
- 4ms Company
Table of Contents
4ms Company DIY Looping Delay Kit Instructions
RESISTOR INSTRUCTION
330Ω Resistor x 4
1k Resistor x 3
10k Resistor x 9
33k Resistor x 5
47k Resistor x 9
100k Resistor x 5
1M Resistor x 1
0.1µF Capacitor x 16
10nF Capacitor x 2 101K 101K 101K
100pF Capacitor x 3
47µF Capacitor x 2
Diode x 3
Red 3mm LED
Op-amp x 3 8-pin socket x 3
16-pin header x 1
3-pin header x 1
10-pin sockets x 4
Pot, 10k, 16mm Center Detent x 1
Pot, 100k, 16mm No Detent x 3
Pot nuts x 4
LED Buttons, White Momentary x 3
Switch, 3-position x 1
Switch nuts x 2
Jacks, Mono x 13
Jack Nuts x 13
Knobs x 4
DIY Looping Delay Faceplate
DIY Looping Delay PCB
Drainboard (LD firmware)
Jumper x 1
M3 x 8mm Screw x 4
Euro rack power cable 16-to-16
View the Build Guide at 4mscompany.com/ldkit?manualtab
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>