j5create JTSA302 Ergonomic Dual Monitor Mount with Docking Station User Manual
- June 17, 2024
- j5Create
Table of Contents
j5create JTSA302 Ergonomic Dual Monitor Mount with Docking Station
Product Information
Content
Product Name
- Ergonomic Dual-Monitor Mount with Docking Station JTSA302
Specifications
- Assembly Instructions
- Includes components: A x2, D x1, E x1
- For Clamp Installation: M-B x8, M-C x8
- For Grommet Installation: B x2, C x1, F x1, M-A x8
- Grommet Installation requires a table with a hole or drilling a hole
- Movable Angle feature for adjusting tightness of the pivot and gas spring
Clamp Installation
Step 1: Ensure object A is oriented correctly and install it to the bottom. Tighten the screws on the top first.
Clamp Installation
If you prefer grommet installation please look at the “Grommet Installation”
Step 2: Install object B to the bottom, making sure the orientation
matches the picture. Tighten the screw firmly to prevent the arm from falling
off.
Step 3: Slide the screws into the bracket slot and install objects B and C.
Step 4: Install object D.
Step 5: Install objects E and F. Tighten the screws firmly to prevent the
arm from falling off.
Step.06
Grommet Installation
The table needs to have a hole or you can drill a hole yourself.
Step 1: Ensure object A is oriented correctly and install it to the
bottom. Tighten the screws on the top first.
Step 2 : Install object C.
Step 3: Install objects D and F. Tighten the screws firmly to prevent the
arm from falling off.
Complete
Additional Instructions
- Movable Angle feature: Turn the screw to adjust the tightness of the pivot.
- Turn another screw to adjust the tightness of the gas spring.
- You can place the cable in the storage slot and then assemble the storage cover.
Movable Angle
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>