CAME-TV Dual Battery Charger and Power Inverter and Power Strip User Manual
- June 17, 2024
- CAME-TV
Table of Contents
CAME-TV Dual Battery Charger and Power Inverter and Power Strip
Product Information
Specifications
- Input Voltage: 110V
- Type: Dual Battery Charger & Power Inverter & Power Strip
- USB Output Voltage: 15.8V
- USB Output Current: 3.4A
- AC Output Voltage: 15.8V
- AC Output Current: 3.5A
- Battery Level Indicator: 95%
Product Usage Instructions
Powering on AC Output
To power on the AC output, follow these steps:
- Press and hold the AC button for 2 seconds.
- Release the AC button and wait for 4 seconds for the AC output to stabilize.
Components
- Display screen
- Type-C 65W output
- Main switch button
- USB output
- DC output
- USB &DC switch button
- D-tap output
- LED lighting
- LED light switch button
- AC switch button
- AC output socket
- AC input
- Battery plate
- Storage drawer
Important Notes
- Secure AC Startup: To ensure the longevity of the inverter, initiate AC power by holding the AC button for 2 seconds, then release it and allow 4 seconds for the AC to stabilize before plugging in devices into the AC Outlet.
- Optimal Battery Capacity: For consistent performance and extended battery life, it is recommended to use batteries with a capacity of 99Wh or higher.
- Smaller batteries have lower current protection thresholds, increasing the risk of overcharging or overcharging.
- Built-in Overload Protection: Each inverter side features 9A current protection to safeguard battery health.
- Exceeding 9A on either side will trigger automatic protection and disable the output. To reset, power off the unit, remove any batteries and devices plugged in, and restart the Power Station.
- Balanced Power Utilization: Optimal performance is achieved with two fully charged batteries.
- Uneven voltages may cause the inverter to prioritize the higher-voltage battery while waiting for the other to reach a sufficient level for simultaneous operation.
- Prioritized Charging: During dual battery charging, the charger prioritizes the battery with significantly lower voltage. Once voltages become balanced, simultaneous charging commences.
- Power Overload Recovery: If the device activates automatic protection due to exceeding maximum power draw, simply disconnect it or perform a restart to restore normal functionality.
- D-Tap Output Dependency: The D-Tap output relies on the connected battery for power. With no battery present, the D-Tap port will remain inactive.
- Controlled Power Distribution: 4 power switches control different functions such as the Main power for charging batteries, powering on the LED Light, enabling power on the USB & DC Outputs, and a switch to activate the AC Inverter.
- You can enable and disable each part of the CAME-TV Power Station as required.
FAQ:
Q: What is the input voltage for this product?
- A: The input voltage is 110V.
Q: What is the maximum output power of this product?
- A: The maximum output power is AC 220W (Max.) or DC 180W (Max.) or AC+DC=220W (Max.), depending on the configuration.
Q: What batteries are compatible with this product?
- A: This product is compatible with two batteries or one battery.
- For two batteries, ensure that the voltage difference between them is less than 0.1V.
Q: How do I power on the AC output?
- A: To power on the AC output, press the AC button for 2 seconds, then release it and wait for 4 seconds for the AC to stabilize before plugging in devices into the AC Outlet.
Q: How do I reset the unit if the output is disabled due to exceeding current limits?
- A: To reset the unit, power off the unit, remove any batteries and devices plugged in, and restart the Power Station.
- We are proud to introduce this versatile power station that brings convenience to your life.
- This power station is not only an inverter, capable of converting one or two 14.4V V-mount batteries into AC output but also features multiple interfaces for easy connection to different devices.
- Additionally, it serves as an efficient battery charger, capable of simultaneously charging two V-mount batteries.
- Even without batteries, it can be used as a practical power strip, providing you with even more convenience.
Instructions
OVERVIEW
- Display screen
- Type-C 65W output
- Main switch button
- USB output
- DC output
- USB&DC switch button
- D-tap output
- LED lighting
- LED light switch button
- AC switch button
- AC output socket
- AC input
- Battery plate
- Storage drawer
Specifications
| Cases | AC Input | Mount Battery | Maximum Output |
|---|---|---|---|
| 1 | NO | Two Batteries (The voltage difference between the two batteries are | |
| less than 0.1V） | AC 220W(Max.) or DC 180W(Max.) or AC+DC=220W(Max.) | ||
| 2 | NO | One Battery | AC 100W(Max.) or DC 100W(Max.)or AC+DC=100W(Max.) |
| 3 | YES | Two Batteries | AC 220W(Max.)+ DC 180W(Max.) |
| 4 | YES | One Battery | AC 220W(Max.)+ DC 165W(Max.) |
| 5 | YES | No Battery | AC 220W(Max.)+ DC 65W(Max.) |
Important Notes
- Secure AC Startup: To maximize inverter longevity, initiate AC power by holding the AC button for 2 seconds, then releasing it and allowing 4 seconds for the AC to stabilize before plugging in devices into the AC Outlet.
- Optimal Battery Capacity: For consistent performance and extended battery life, we recommend using 99Wh or higher-capacity batteries. Smaller batteries have lower current protection thresholds, increasing the risk of overcharging or overcharging.
- Built-in Overload Protection: Each inverter side features 9A current protection to safeguard battery health. Exceeding 9A on either side will automatically trigger the automatic protection feature and will disable the output. To reset, power off the unit, remove any batteries and devices plugged in, and restart the Power Station.
- Balanced Power Utilization: Optimal performance is achieved with two fully charged batteries. Uneven voltages may cause the inverter to prioritize the higher-voltage battery while waiting for the other to reach a sufficient level for simultaneous operation.
- Prioritized Charging: During dual battery charging, the charger prioritizes the battery with a significantly lower voltage. Once voltages become balanced, simultaneous charging commences.
- Power Overload Recovery: Should the device activate automatic protection due to exceeding maximum power draw, simply disconnect it or perform a restart to restore normal functionality.
- D-Tap Output Dependency: The D-Tap output relies on the connected battery for power. With no battery present, the D-Tap port will remain inactive.
- Controlled Power Distribution: 4 power switches control different functions such as the Main power for charging batteries, powering on the LED Light, enabling power on the USB & DC Outputs, and a switch to activate the AC Inverter. You can enable and disable each part of the CAME-TV Power Station as required.
Aftersales Service
- While we trust you will never have the need, if you do, our service is both friendly and hassle-free.
- Email: Americas : americas@came-tv.com
- Outside Americas: europe@came-tv.com
Documents / Resources
|
CAME-TV CAME-TV Dual Battery Charger and Power Inverter and Power
Strip
[pdf] User Manual
CAME-TV Dual Battery Charger and Power Inverter and Power Strip, CAME-TV, Dual
Battery Charger and Power Inverter and Power Strip, Power Inverter and Power
Strip, Power Strip
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>