Shenzhenhuazhifazhankejiyouxiangongsi MWC-B Magic Wireless Charger User Manual
- June 6, 2024
- Shenzhenhuazhifazhankejiyouxiangongsi
Table of Contents
Magic Wireless Charger
User Manual
Instructions
- This product supports fast charging. Connect the USB cable to the input port of DC5V-9V power supply.
- Wireless charging range is located in the center of the magic wireless charger, please leave the mobile phone in the center of the item.When the product is connected to the power supply, the red indicator lights up
- When the mobile phone with wireless charging function is placed in the center of the product, the product senses the wireless reception, the surface pattern of the product starts to emit light in a certain order. When the mobile phone charges up to about 95%,it stops lighting, and when the mobile phone is released from the magic wireless charger, the lighting also stops.
- As shown in Figure 4, it is a light button. You can turn off the light button so that magic wireless charger will not light up, but mobile phone keeps charging.
- It must be used with adapters above 2.0,otherwise the charging time will exceed 2 hours.
WARNING AND SAFETY PRECAUTIONS
- The surface of this product is glassware and built-in boost pack. It should not be heavily pressed or smashed to avoid electric shock and injury.
- The shell is made of Aluminium alloy and can not be twisted and blank holder to avoid scratch.
- Do not get wet to avoid short circuit and electric shock.
After-sale Service
Our company offer 12 months warranty on this product. Please feel free to contact us if you have any dissatisfaction with the item. The order number is treated as a guarantee.
Specification
- Power: 5-15W, maximum support 15W
- Size: 182x12mm Diameter
- Net weight: 260g ± 10g
1
|
DC5V-9V power port
---|---
2|
Charging area
3
| Lighting
4|
Light switch
FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. This
equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference recei ved, including interference that may cause undesired operation.
RF Exposure Statement
To maintain compliance with FCC’s RF Exposure guidelines, This equipment
should be installed and operated with minimum distance of 20cm the radiator
your body. This device and its antenna(s) must not be co-located or operation
in conjunction with any other antenna or transmitter.