dji Phantom 4 Pro Plus Quadcopter User Guide

: June 17, 2024
: DJi

Table of Contents

dji Phantom 4 Pro Plus Quadcopter
Product Information
Product Overview
Using Phantom 4 Pro+
- Flight
Specifications
Documents / Resources

dji Phantom 4 Pro Plus Quadcopter

dji-Phantom-4-Pro-Plus-Quadcopter-product

Product Information

Specifications

Transmission range: Up to 4.3 mi (7 km)*
Remote controller features physical buttons and dials for exposure, camera tilt, photo capture, and video recording
DJI LIGHTBRIDGE™ provides a live HD view from the Phantom camera on the remote controller’s display
Dual frequency support for stable HD video downlink
Internal battery for long battery life

FAQ

Q: How far can the Phantom 4 Pro+ remote controller transmit?
- A: The Phantom 4 Pro+ remote controller has a transmission range of up to 4.3 mi (7 km)*.
Q: What is DJI LIGHTBRIDGE™?
- A: DJI LIGHTBRIDGE™ is a technology that provides a live HD view from the Phantom camera directly on the remote controller’s display.
Q: How long does the remote controller’s battery last?
- A: The remote controller has an internal battery that ensures a long battery life.
Q: How do I control the camera’s tilt?
- A: Use the gimbal dial on the remote controller to control the camera’s tilt.

Product Overview

Phantom 4 Pro+

The DJI PHANTOMTM 4 Pro+ is a smart prosumer flying camera capable of shooting 4K video at 60fps and at up to100mbps, and capturing 20 megapixel stills. 4 directions of obstacle avoidance allow it to intelligently avoid obstacles during flight. Using upgraded TapFlyTM and ActiveTrackTM through the DJI GOTM 4 app, you can fly anywhere visible on your screen or track a moving subject smoothly and easily with a simple tap. The brand new camera uses a 1-inch CMOS sensor offering unprecedented clarity, lower noise, and better quality images.

Gimbal and Camera
Downward Vision System*
Micro USB Port
Camera/Linking Status Indicator and Link Button
Camera Micro SD Card Slot
Forward Vision System
Infrared Sensing System*
Front LEDs
Motors
Propellers
Aircraft Status Indicators
Antennas
Rear Vision System
Intelligent Flight Battery
Power Button
Battery Level Indicators

The Vision and Infrared Sensing Systems are affected by surrounding conditions. Read the Disclaimer and Safety Guidelines and watch the tutorials in the DJI GO 4 app or on the official DJI website to learn more. http://www.dji.com/phantom-4-pro

Remote Controller

The powerful remote controller of the Phantom 4 Pro+ has a transmission range extending up to 4.3 mi (7 km)*. It features physical buttons and dials to control exposure, camera tilt, photo capture and video recording. Built into the remote controller is DJI LIGHTBRIDGETM, providing a live HD view from the Phantom camera directly on the display. Dual frequency support makes the HD video downlink more stable. An internal battery ensures a long battery life and ease of use.

Power Button
Return-to-Home (RTH) Button
Control Sticks
Speaker
Status LED
Battery Level LEDs
Power Port
Display Screen
Sleep/Wake Button
Microphone
Antennas
Handle Bar
Gimbal Dial
Camera Settings Dial
Record Button
Flight Mode Switch
Shutter Button
Intelligent Flight Pause Button
C1 and C2 Buttons (customizable)
Micro USB Port
HDMI Port
Micro-SD Card Slot
USB Port

The default flight control is known as Mode 2. The left stick controls the aircraft’s altitude and heading, while the right stick controls its forward, backward, left and right movements. The gimbal dial controls the camera’s tilt.

- The remote controller is able to reach its maximum transmission distance (FCC) in a wide open area with no Electro-Magnetic Interference, and at an altitude of about 400 feet (120 meters).

Using Phantom 4 Pro+

Watch the Tutorial Videos

Watch the tutorial videos at www.dji.com or in the DJI GO 4 app.

Check the Battery Levels

dji-Phantom-4-Pro-Plus-Quadcopter-fig-6

Press once to check the battery level. Press once, then again and hold to turn on/off.

Charge the Batteries

Warnning: When charging is complete, the battery level indicators will automatically turn off.

Prepare the Remote Controller

dji-Phantom-4-Pro-Plus-Quadcopter-fig-8

Prepare for Takeoff

dji-Phantom-4-Pro-Plus-Quadcopter-fig-9

First-time activation requires your DJI account and internet connection.

Black propeller rings go on motors with black dots.
Press the propeller down onto the mounting plate and rotate in the lock direction until secure.
Silver propeller rings go on motors without black dots.

Warning

Check that the propellers are secure before each flight.

Flight

Ready to Go (GPS)

Before taking off, make sure the Aircraft Status Bar in the DJI GO 4 app indicates ‘Ready to Go (GPS)’ or ‘Ready to Go (Vision)’ if flying indoors.

In the DJI GO 4 App:

Auto Takeoff
- The aircraft will take off and hover at an altitude of 4 feet (1.2 meters).
Return-to-Home (RTH)
- Bring the aircraft back to the Home Point. Tap again to stop the procedure.
TapFly
- Tap on your screen to fly your Phantom in that direction, avoiding obstacles as it flies.
Auto Landing
- The aircraft will land vertically and stop its motors.
Normal
- You are in control of the Phantom, with satellite and Return-to-Home support.
ActiveTrack
- Mark an object on your screen to track it as it moves.

Warning

Watch the tutorial in the DJI GO 4 app or on the official DJI website to learn more.
Always set an appropriate RTH altitude before takeoff. When the aircraft is returning to the Home Point, you should guide it with the control sticks. Refer to the Disclaimer and Safety Guidelines for more details.

Manual Takeoff

Warning

Rotating propellers can be dangerous. Do not start the motors when there are people nearby.
Always keep your hands on the remote controller so long as the motor is still spinning.
Stop motor mid-flight: Pull the left stick to the bottom inside corner while simultaneously pressing the RTH button. Only stop motors mid-flight in emergency situations when doing so can reduce the risk of damage or injury. Refer to the user manual for details.

Manual Landing

Left stick down (slowly) until you touch the ground
Hold a few seconds to stop the motors

Info

It’s important to understand basic flight guidelines, for the safety of both you and those around you.
Don’t forget to read the Disclaimer and Safety Guidelines.

Specifications

Aircraft
- Weight (Battery & Propellers Included): 1388 g
- Max Ascent Speed: S-mode: 6 m/s; P-mode: 5 m/s
- Max Descent Speed: S-mode: 4 m/s; P-mode: 3 m/s
- Max Speed: 45 mph (72 kph) (S-mode); 36mph (58 kph) (A-mode); 31 mph (50 kph) (P-mode)
- Max Service Ceiling Above Sea Level: 19685 ft (6000 m)
- Max Flight Time: Approx. 30 minutes
- Operating Temperature: 32° to 104° F ( 0° to 40° C)
- Satellite Positioning Systems: GPS/GLONASS
- Hover Accuracy Range: Vertical: ±0.1 m (With Vision Positioning); ±0.5 m (With GPS Positioning)
- Horizontal: ±0.3 m (With Vision Positioning); ±1.5 m (With GPS Positioning)
Gimbal
- Controllable Range: Pitch: -90° to +30°
Vision System
- Velocity Range: ≤31 mph (50 kph) at 6.6 ft (2 m) above ground
- Altitude Range: 0 – 33 ft (0 – 10 m)
- Operating Range: 0 – 33 ft (0 – 10 m)
- Obstacle Sensory Range: 2 – 98 ft (0.7 – 30 m)
- Operating Environment: Surfaces with clear patterns and adequate lighting (> 15 lux)
Infrared Sensing System
- Obstacle Sensory Range: 0.6 – 23 ft (0.2 – 7 m)
- Operating Environment: Surface with diffuse reflection material, and reflectivity > 8% (such as wall, trees, humans, etc.)
Camera
- Sensor: 1’’ CMOS; Effective pixels: 20M
- Lens: FOV (Field of View) 84°, 8.8 mm (35 mm format equivalent: 24 mm), f/2.8 – f/11, auto focus at 1 m – ∞
- ISO Range: Video: 100 – 3200 (Auto); 100 – 6400 (Manual); Photo: 100 – 3200 (Auto); 100 – 12800 (Manual)
- Mechanical Shutter: 8 – 1/2000 s
- Electronic Shutter: 8 – 1/8000 s
- Max Image Size: 3:2 Aspect Ratio: 5472×3648; 4:3 Aspect Ratio: 4864×3648; 16:9 Aspect Ratio: 5472×3078
- Still Photography Modes: Single Shot
- Burst Shooting: 3/5/7/10/14 frames
- Auto Exposure Bracketing (AEB): 3/5 bracketed frames at 0.7EV Bias
- Interval: 2/3/5/7/10/15/30/60 s
- Video Recording Modes: H.265
- C4K: 4096×2160 24/25/30p
- 4K: 3840×2160 24/25/30p
- 2.7K: 2720×1530 24/25/30/48/50/60p
- FHD: 1920×1080 24/25/30/48/50/60/120p
- HD: 1280×720 24/25/30/48/50/60/120p
- H.264
- C4K: 4096×2160 24/25/30/48/50/60p
- 4K: 3840×2160 24/25/30/48/50/60p
- 2.7K: 2720×1530 24/25/30/48/50/60p
- FHD: 1920×1080 24/25/30/48/50/60/120p
- HD: 1280×720 24/25/30/48/50/60/120p
- Video Storage Bitrate: 100 Mbps
- Supported File Systems: FAT32 (≤ 32 GB); exFAT (> 32 GB)
- Photo: JPEG, RAW (DNG), JPEG + RAW
- Video: MP4/MOV (AVC/H.264; HEVC/H.265)
- Supported SD Cards: Micro SD, Max Capacity: 128 GB. Class 10 or UHS-1 rating required
- Operating Temperature: 32° to 104° F (0° to 40° C)
Remote Controller
- Operating Frequency: 2.400 – 2.483 GHz and 5.725 – 5.825 GHz
- Max Transmission Distance: FCC: 4.3 mi (7 km); CE: 2.2 mi (3.5 km); SRRC: 3.1 mi (5 km) (Unobstructed, free of interference)
- Operating Temperature: 32° – 104° F (0° – 40° C)
- Battery: 6000 mAh LiPo 2S
- Transmitter Power (EIRP): 2.4 GHz: 26 dBm (FCC); 17 dBm (CE); 20 dBm (SRRC）
- 5.8 GHz: 28 dBm (FCC); 14 dBm (CE); 20 dBm (SRRC）
- Operating Voltage: 1.2 A @ 7.4 V
- Built-in Display Device: 5.5 inch screen, 1920×1080, 1000 cd/m2
- Android system, 4G RAM＋16G ROM
Charger
- Voltage: 17.4 V
- Rated Power: 100 W
Intelligent Flight Battery (PH4-5870mAh-15.2V)
- Capacity: 5870 mAh
- Voltage: 15.2 V
- Battery Type: LiPo 4S
- Energy: 89.2 Wh
- Net Weight: 468 g
- Charging Temperature Range: 41° to 104° F (5° to 40° C)
- Max Charging Power: 100 W

Download the user manual for more information: http://www.dji.com/phantom-4-pro

※ This Quick Start Guide is subject to change without prior notice.

DJI incorporates HDMITM technology.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
PHANTOMTM and DJITM are trademarks of DJI.

Designed by DJI. Printed in China.

www.dji.com

SCAN