AURZEN ‎F503 3D Dolby Audio User Manual

AURZEN ‎F503 3D Dolby Audio

INTRODUCTION

BRAND STORY
AURZEN, inspired by Aurora, aims to creates an audiovisual experience with a limitless of Zen. We find a balance between the equipment and the environment for the extremely immersive cinema experience at home and outdoors instead of compromising. “One life, enjoy now live” is the heart of AURZEN, encouraging you to enjoy movies and entertainment together with your beloved any time, rather than waiting for the right moment to go out to a movie theater or cinema.
Enlightened by the concept that sound travels faster than light, the launch of AURZEN Boom03- the Sound Master Private Cinema. Through an all-in-one 30 surround sound chamber and its new WebOS intelligent content system, it provides a stunning cinema experience that emphasizes sound quality. It boasts visible sound and amplified vision.

We’re thrilled to have you here and value every opinion from you. Feel free to reach us at support@aurzen.com.

Dear Valued Customer,

• Thank you for choosing our projector. We appreciate your trust in our brand and our commitment to delivering high-quality products.
• We understand that setting up and operating a new device can sometimes be challenging, which is why we want you to know that we ore here to support you. If you have any questions or concerns about your new projector, please do not hesitate to contact us at support@aurzen.com. Our customer service team is always ready to assist you and provide you with any support you may need.
• We hope that the new projector brings you unlimited enjoyment and entertainment. If you have any feedback or suggestions on how we can improve our products or services, we wou Id love to hear from you, too.
• Thank you again for choosing our product.

TROUBLESHOOTING GUIDE

1. Can I directly use Netflix on the projector?
   Yes, you can. The projector comes with pre-installed and officially-licensed Netflix/You Tube/prime video apps. You have the convenience of watching your favorite videos directly on the projector without any hassle.

2. Does the projector support auto focus?
   Yes, it does. After you power on the projector, it will automatically adjust the image focus. In addition to that, when the projector detects shaking/rapid movement, it will be triggered to automatically perform auto focus adjustment or keystone correction.
   

3. Why doesn’t the remote control work?
   

4. ***** Please make sure you have installed two AAA batteries in the remote control.

5. • Avoid mixing new batteries with old ones in the remote control as this can result in insufficient power supply and operational issues.
6. • When performing Bluetooth pairing, please follow the instructions provided. If you skip the Bluetooth pairing step, ensure that you point the remote control at the IR sensors on the projector when using.
7. • If you encounter persistent issues, please don’t hesitate to contact us for a replacement. You can reach us by sending an email to support@aurzen.com.

8. What should I do if my projector has no audio?
   

9. • Please make sure sound is not muted.
10. • Please try to turn up the volume by rotating the knob on the projector or pressing the volume+ button of remote control.

11. How do I switch to Bluetooth Speaker mode on Boom3?
    

12. Step 1 : Go to Homepage> My Apps > Bluetooth Music to make the projector ready for a Bluetooth connection.

13. Step 2 : Access your mobile device’s Bluetooth settings and activate Bluetooth, then search for AURZEN_PRJ in the available devices list and pair your mobile device with the projector.

IN THE BOX

PROJECTOR OVERVIEW

Projector

To optimize the sound quality, please remove the back cover before using the projector. When the projector is not in use, remember to !

Note
To ensure an optimal audio quality experience and prevent damage to the speakers, please DO NOT press four speakers and auxiliary.

Remote

* Power Button

• Pess once : Turn on the projector.
• * Mute: Silence the projector’s audio.
• Input Source : Press to access the input source page and select your preferred input source.
• • Focus: Press and hold these two buttons to make precise focus adjustment
• * Left/Right/Up/Down: Navigate menus or adjust the selected content
• * OK: Confirm selection.
• • Back : Go back to the previous menu.
• • Home : Return to the homepage.
• • Settings /Menu: Press to access the setting page or open the menu.
• * Volume+/-: I ncrease/decrease the projector’s volume.
• • Shortcut to NETFLIX : Press to launch the NETFLIX opp.
• • Shortcut to You Tube : Press to launch the You Tube opp.
• • Shortcut to prime video : Press to launch the prime video opp.

QUICK START

Projector Installation

Notes
Whichever installation option you select, please make sure:
To go to Homepage> Setting @) > Picture> Projection Mode to select the corresponding projection mode, so the images can be projected correctly.
Mounting Screw: 1/4″

Power On/Off

Remote Pairing and Setup Wizard

• The projector automatically adjusts image clarity and corrects image shape upon powering on.
• Afterword, follow the setup wizard to pair the remote with the projector, choose your preferred language, establish a WiFi connection, and access the homepage.

Steps for Remote Pairing

1. Hold the remote close to the projector.
2. Simultaneously press and hold the Volume+ and Volume – buttons for approximately 10 seconds.
3. Once the LED indicator on the remote flashes quickly, the pairing is successful.

Notes

• • Please ensure to instoll 2 pieces of AAA batteries in the remote first.
• • If you skip the pairing steps, you con go to the homepage and select lj to enter the pairing page again.

Images Adjustment

1. Auto Focus
   When the projector is powered on, it will automatically adjust the image quality.

2. Electric/Manual Focus
   You can also press and hold the focus buttons on the remote to sharpen the image focus until the blurry image becomes clear.

• Auto Keystone Correction
  When the projector is powered on, it will automatically correct the keystone distortion.

• Manual Keystone Correction
  Press the button @ on the remote, then select Manual Keystone Correction to manually correct the image shape by four points.

Tip

• When the projector detects shaking/rapid movement, it will be triggered to automatically perform auto focus adjustment or keystone : ‘ correction. If you find the image is not sufficiently clear or the image is not perfectly square, please use the focus buttons on the remote control to manually focus or utilize the four-point keystone correction to manually correct the image shape.
• Go to@) Setting> Picture> Image Zoom to reduce or enlarge the image size between 50% and 100%.

Play Contents from Officially Licensed Apps like Netflix, Prime Video and You Tube
Go to the Homepage and select your preferred platform via the shortcuts on the remote, then log in to your account to play the corresponding contents.

PROJECTOR CONNECTION AND INPUT SOURCE

Connect your device to the projector correctly, then select the right input source.

USB Connection
To play files stored on a USB disk, insert the disk into the projector and select the USB icon located on the upper right corner of the homepage. Alternatively, you can navigate to Homepage> My Apps > Resource Manager to locate and play the desired file directly.

• Photo Format Supported JPG/PNG/BMP/GIF/JPEG
• Audio Format Supported OGG/AAC/MP3/FLAC/WAV
• Video Format Supported MKV/MP4/FLV/MOV/M2TS/AVI/TS/MPG/3GP/MPEG1

HDMI Connection
To connect a device with an HDMI output port to the projector, use the provided HDMI cable to connect it to the projector’s HDMI input port. Then, press the button @ on the remote and select HDMI 1 or HDMI 2 as the input source.

Nate
HDMI®, the HDMI® logo, and High-Definition Multimedia Interface ore trademarks or registered trademarks of HDMI Licensing LLC.

Wired Speaker and Headphones Connection
This option is not required to select any input source.

Nate
Dolby, Dolby Audio, and the double-D symbol ore trademarks of Dolby Laboratories Licensing Corporation.

WIFI CONNECTION
You can connect your projector to your router’s WiFi by accessing the setup wizard or clicking on the WiFi icon 9 on the homepage.

SCREEN MIRRORING

For Android System
To activate this function, please make sure your Android device supports Multi-screen/Smart View/Wireless Display. Names vary on different Android devices.

1. Step 1
   Go to the WiFi setting of your Android device to switch on the option of WiFi
   Note It is not necessary to have a successful WiFi connection, but it is important to ensure that the WiFi is turned on in your Android device.

2. Step 2
   Go to Hom page> My Apps > Screen Cast Assistant or go to Setting ® > General & Privacy> Miracast Screen the enter the interface below.
   

3. Step 3
   Activate the Multi-screen/Smart View/Wireless Display function on your Android device and search for the projector.

4. Step 4
   Choose AURZEN_PRJ from the list, and once the connection is successful, the content on your Android device will be mirrored onto the projection screen or wall.

DLNA

1. Step 1
   Connect the projector and your mobile device to the same router’s WiFi.

2. Step 2
   Go to Homepage> My Apps > Screen Cast Assistant and then select DLNA to access the following page.

3. Step 3
   Launch a video player App on your mobile device and select a video to play.

4. Step 4
   Tapto search for the projector and select AURZEN_PRJ to connect. The contents on your device will be cast to the wall/screen .

Note
When you cast a video from your mobile device, the video will only be displayed on the projected screen and you can still use your mobile device without interrupting the video or showing any of your other content.

For iOS System

1. Step 1
   Connect the projector and your mobile device to the same router’s WiFi or directly connect your mobile device to the projector’s AP hotspot.
   Tip
   When you are using the projector’s AP hotspot, the content will be mirrored using cellular data.

2. Step 2
   Go to Hom page> My Apps > Screen Cast Assistant and then select MagicCast to access the following page. Next, select Go to download to download and install the MagicCast App.

3. Step 3
   Launch the Magic Cast App and remain on the following page.

4. Step 4
   Go to the Control Center of your iOS device, then tap Screen Mirroring/Air Playing to search for the projector.

5. Step 5
   Choose AURZEN_PRJ from the list, and once the connection is successful, the content on your iOS device will be mirrored onto the projection screen or wall.
   

Connect to An External Bluetooth Speaker
In addition to using the wired 3.5mm audio output port, you can also connect Bluetooth speakers or Bluetooth Headphones to this projector via a Bluetooth connection.

1. Step 1
   Turn on your Bluetooth device and make it ready for a Bluetooth connection.

2. Step 2
   Go to Homepage> Setting> Bluetooth to scan available Bluetooth devices, then select your Bluetooth device and pair it with the projector.

3. Step 3
   Access your mobile device’s Bluetooth settings and activate Bluetooth. Search for AURZEN_PRJ in the available devices list to pair your mobile device with the projector.

IMPORTANT
Compared with the wired connection to a speaker, a Bluetooth connection spends more time processing digital audio data, converting said data to an audio signal, and streaming the signal. There may be a delay or slight lag on audio due to signal interference.

• As a result, the sound on the speaker may not be in sync with the image on the projector, especially when you are using wireless screen mirroring with WiFi and Bluetooth connection at the same time.
• If you are experiencing this situation, please check the following options to improve audio quality:
• • Instead of using wireless screen mirroring and Bluetooth connection at the same time, we recommend using an H DM I connection via the provided HDMI cable and Bluetooth connection simultaneously. If you still want to use wireless screen mirroring, it is recommended to output the audio via a wired speaker.
• • Move your Bluetooth device closer to the projector.
• • Keep the projector and your Bluetooth speaker away from other Bluetooth devices to avoid interference.
• • You may be able to adjust the latency(Lip Sync) on your device which is playing the video. The way to adjust the latency varies with different devices; please consult with the device manufacturer

SETTING

• Network & Internet
  Connect the projector to a working WiFi network.

• Bluetooth
  Connect the projector to an external Bluetooth speaker.

lnput/HDMI

1. Choose the default input source once the projector is powered on.
2. Adjust the image aspect ratio when using the HDtv11 input source. and more.

Picture

1. Correct the Keystone and adjust the focus manually or automatically.
2. Image Size: tv1odify the image size between 50% and 100%.
3. Projection Mode: Select the appropriate projection mode to ensure accurate image projection.

Display & Sound

1. Adjust the image color preferences such as color temperature, contrast, etc, and set sound preferences such as vivid, movie, etc based on the content being projected.
2. Choose the correct sound output based on the connected device.
3. Enable or disable key tones, etc.

PROJECTION DISTANCE AND SIZE

• • The recommended projection distance varies with different projection contents. Please adjust the distance between the wall/screen and the projector as needed.
• • Ambient darkness will improve the clarity of the projected images.

E-MANUAL
To access the on line user manual for future reference, follow these steps:

1. Step 1: Go to the homepage.
2. Step 2: Navigate to My Apps.
3. Step 3: Click on the E-manual option.

EXPLANATION OF APPS|

1.  You can’t download the apps on the APP STORE platform, but you can log into your account to watch the contents directly.

2. You can download the apps in the App Assistant and log into your account to watch the contents directly.

3. Once you’re on the My Apps page, you can press and hold the OK button, then use the buttons (Q) to move the opp and set up you favorite appsr

SPECIFICATIONS

576i/576P/720i/720P/1080i/1080P/4K
Aspect Ratio| 4:3/16:9/Auto| Focus| Auto and Electric/lVlanual
Keystone Correction| Auto and 4D Keystone Correction| Installation Options| Front/Rear/Ceiling
Power Supply| AC 100-240V, 50/60Hz| Unit Dimension| 89×8.3×6.1inches(225x210x156mm)
Unit Net Weight| 5.51b(2.5kg)| Photo Format Supported| JPG/PNG/BIVIP/GIF/JPEG

FCC Statement

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Pules. Operation is subject to the following two conditions

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

NOTE:

• This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Pules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.
  • This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
  • This equipment should be installed and operated with minimum distance 20cm between the radiator& your body.

This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

ISEDC Warning
This device complies with Industry Canada licence-exempt PSS standard(s). Operation is subject to the following two conditions

1. this device may not cause interference, and
2.  this device must accept any interference, including interference that may cause undesired operation of the device.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>