dreamGEAR GRX-340 Advanced Wired Stereo Gaming Headset User Guide

dreamGEAR GRX-340 Advanced Wired Stereo Gaming Headset

USER GUIDE

GRX-340 for Xbox One™

www.dreamgear.com

Please read and follow this user guide thoroughly before using the GRX-340.

Includes

GRX-340 Gaming Headset, Xbox 360® adapter cable, and user guide

Technical Specifications

Frequency response: 20 Hz – 20 kHz
Driver size: 40mm
Impedance: 32Ω±15%
Cable length: Approx 4 foot
Max power: 30mW
Input type: 3.5mm audio
Volume control: Yes

Control box functions

Volume dial

• To raise the volume, turn the volume dial towards the plus sign (+).
• To lower the volume, turn the volume dial towards the minus sign (-).

Microphone switch

• To use the microphone, slide the MIC switch towards “ON”.
• To mute the microphone, slide the MIC switch towards “OFF”.

How to connect your GRX-340 to your Xbox One™ controller with 3.5mm jack

1. Turn down the volume on the GRX-340 to the lowest level.
2. Place the headset on your head and adjust the headband until the headset fits comfortably. Adjust the microphone to fit properly.
3. Insert the 3.5mm plug of the GRX-340 into the bottom of the Xbox One™ controller with 3.5mm jack.
4. Slowly raise the volume to a comfortable level.
5. Refer to the user guide of your Xbox One™ on how to set up the headset to work with online play.

How to connect your GRX-340 to your Xbox One™ controller using the

Microsoft® Stereo Headset Adapter (not included)

1. Insert your Microsoft® Stereo Headset Adapter into the bottom your Xbox One™ controller.

NOTE : Please refer to the user guide of your Microsoft® Stereo Headset Adapter for connection instructions.

2. Turn down the volume on the GRX-340 to the lowest level.
3. Place the headset on your head and adjust the headband until the headset fits comfortably. Adjust the microphone to fit properly.
4. Insert the 3.5mm plug of the GRX-340 into the bottom of the Microsoft® Stereo Headset Adapter.
5. Slowly raise the volume to a comfortable level.

6. Refer to the user guide of your Xbox One™ on how to set up the headset to work with online play.

How to connect your GRX-340 to your DUALSHOCK® 4 controller

1. Turn down the volume on the GRX-340 to the lowest level.
2. Place the headset on your head and adjust the headband until the headset fits comfortably. Adjust the microphone to fit properly.
3. Insert the 3.5mm plug of the GRX-340 into the bottom of the DUALSHOCK® 4 controller.
4. Slowly raise the volume to a comfortable level.
5. Refer to the user guide of your PS4™ on how to set up the headset to work with online play.

How to connect your GRX-340 to your Xbox 360®

1. Turn down the volume on the GRX-340 to the lowest level.
2. Place the headset on your head and adjust the headband until the headset fits comfortably. Adjust the microphone to fit properly.
3. Insert the 2.5mm end of the included Xbox 360® adapter cable into the boom of your Xbox 360® controller.
4. Insert the 3.5mm plug of the GRX-340 into the other end of the Xbox 360® adapter cable.
5. Slowly raise the volume to a comfortable level.
6. Refer to the user guide of your Xbox 360® on how to set up the headset to work with online play.

How to connect your GRX-340 to your Wii U™ GamePad

1. Turn down the volume on the GRX-340 to the lowest level.
2. Place the headset on your head and adjust the headband
https://manual-hub.com/ until the headset fits comfortably. Adjust the microphone to fit properly.
3. Insert the 3.5mm plug of the GRX-340 into the top of the Wii U™ GamePad.
4. Slowly raise the volume to a comfortable level.
5. Refer to the user guide of your Wii U™ on how to set up the headset to work with online play.

How to connect your GRX-340 to your PS Vita® or Nintendo® handheld device

1. Turn down the volume on the GRX-340 to the lowest level.
2. Place the headset on your head and adjust the headband until the headset fits comfortably. Adjust the microphone to fit properly.
3. Insert the 3.5mm plug of the GRX-340 into your handheld device.
4. Slowly raise the volume to a comfortable level.
5. Refer to the user guide of your handheld on how to set up the headset to work with online play.

How to connect your GRX-340 to a smartphone or tablet

1. Turn down your audio device to the lowest level.
2. Place the headset on your head and adjust the headband until the headset fits comfortably. Adjust the microphone to fit properly.
3. Insert the 3.5mm plug of the GRX-340 into your smartphone or tablet.
4. Raise the audio to a comfortable volume on your device and then adjust the volume on the GRX-340 using the volume dial.

NOTES:

• The volume dial only controls the volume of the headset. Console and device volume should be adjusted separately.
•  Make sure that the GRX-340 is worn properly at all times. Do not place the headset around the back of your head; it must be worn over the top of your head. Make sure you allow the microphone to be positioned as close to your mouth as possible for best voice results.
• When the microphone is switched to “OFF”, other players cannot hear your conversation, but you will still be able to hear them speaking.

Folding your GRX-340 Gaming Headset

Important safety precautions

• Do not listen at a high volume level. Extended high volume levels can lead to permanent hearing loss.
• Start with seing the volume level at the lowest volume and adjust until you reach a comfortable volume level.
• Do not use while sleeping, as accidents may occur.
• If you experience any ringing in your ears, try lowering the volume. If the ringing persists, visit your physician.
• Tampering with the product can result in damage to your product, void of warranty, and could cause injuries.

Warranty information

All dreamGEAR/i.Sound products come with a limited warranty and have been subjected to a thorough series of tests to ensure the highest level of dependability and compatibility. It is unlikely that you will experience any problem, but if a defect should become apparent during the use of this product, dreamGEAR warrants to the original consumer purchaser that this product will be free from defects in material and workmanship for a period of 120 days from the date of your original purchase. If a defect covered by this warranty occurs, dreamGEAR, at its option, will repair or replace the product purchased at no charge or refund the original purchase price. If a replacement is necessary and your product is no longer available, a comparable product may be substituted at the sole discretion of dreamGEAR.

This warranty does not cover normal wear and tear, abusive use or misuse, modification, tampering or by any other cause not related to either materials or workmanship. This warranty does not apply to products used for any industrial, professional or commercial purposes.

Service information

For service on any defective product under the 120-day warranty policy, please contact Consumer Support to obtain a Return Authorization Number. dreamGEAR reserves the right to require the return of the defective product and proof of purchase. NOTE: dreamGEAR will not process any defective claims without a Return Authorization Number.

Consumer support hotline
877-999-DREAM (3732) (U.S. and Canada only)
or 310-222-1045 (International)
Consumer support email
support@dreamgear.com
Websites
www.dreamgear.com | www.isound.com

Save a tree, register online
dreamGEAR/i.Sound is making the eco-friendly choice to have all products registered online. This saves the printing of physical paper registration cards. All the information you need to register your recent dreamGEAR/i.Sound purchase is  available at: www.dreamgear.com/product- registration

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>