DRAPER 74307 Digital Angle Finder Instruction Manual

DRAPER 74307 Digital Angle Finder

DIGITAL ANGLE FINDER

74307 INSTRUCTION MANUAL
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY TO ENSURE THE SAFE AND EFFECTIVE USE OF THIS PRODUCT.

Technical Specifications

• Power Supply: 2 AAA batteries (not included)
• Working Temperature: -10°C to 50°C
• Working Humidity: 20% to 90%

Product Usage Instructions

1. Step 1: Powering On the Angle Finder
   To power on the digital angle finder, press and hold the power button located on the side of the device. The LCD display will light up, indicating that the device is ready for use.

2. Step 2: Measuring an Angle
   To measure an angle, follow these steps:

3. Place the angle finder on the surface or object you want to measure.

4. Make sure the reference surface of the angle finder is aligned with the reference surface of the object.

5. Adjust the angle finder until the LCD display shows a stable reading.

6. The displayed value represents the measured angle.

7. Step 3: Switching Units
   The angle finder allows you to switch between different units of measurement. To change the unit, press the unit button located next to the LCD display. The available units may include degrees (°), radians (rad), or gradients (gon). Select the desired unit by cycling through the options until the correct unit is displayed on the screen.

8. Step 4: Powering Off the Angle Finder
   To power off the digital angle finder, press and hold the power button until the LCD display turns off. Make sure to turn off the device after use to conserve battery life.

Frequently Asked Questions (FAQ)

• Q: Can I use this angle finder for both inside and outside angles?
  A: Yes, this angle finder can be used to measure both inside and outside angles.

• Q: What is the maximum angle measurement range of this product?
  A: The working range of this angle finder is from 0° to 180°.

• Q: How do I zero or reset the angle finder?
  A: To zero or reset the angle finder, press and hold the zero button located on the side of the device. This will reset the current angle measurement to zero.

DIGITAL ANGLE FINDER
74307 INSTRUCTION MANUAL

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY TO ENSURE THE SAFE AND EFFECTIVE USE OF THIS PRODUCT.

Technical Specifications

Technical Specifications

Accuracy| 0.15°
Resolution| 0.05°
Working Range| 0° – 360°
Power Supply| CR2032 3V lithium battery
Working temperature| 32°F to 122°F (0°C to 50°C)
Working humidity| <85%

INSTRUCTION OF BUTTON AND LCD

LOCKING POSITION RELATING WITH MEASURING RANGE

Making different measuring range by locking at four different locking holes

INSTRUCTION OF ANALOGUE QUADRANT FOR MOVING BLADE

ABS SETTING

Under ABS moden, long press ZERO/ABS button for 5 seconds to set the zero position of the moving blade

Under “ABS” mode:

1. automatic record the original ZERO position after power off
2. display always reads upright

APPLICATION OF HIGH QUALITY LEVEL VIAL

Notices

• Clean the angle finder with mild liquid soap and a damp cloth, never immerse in water.
• Always use 3v Lithium battery
• Don’t mark the bar with an electric engraver and scratch it.

Note: The measuring range could reach 360° after screw off the locking knob

Helpline: +44 (0) 23 8049 4344 Sales Desk: +44 (0) 23 8049 4333 General Enquiries: +44 (0) 23 8026 6355 drapertools.com email: sales@drapertools.com
Draper Tools Limited, Hursley Road, Chandler’s Ford, Eastleigh, Hampshire. SO53 1YF UK

References

• Draper Tools Official Website | Hand Tools, Power Tools and Accessories
• Manual-Hub.com – Free PDF manuals!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>