DYNEX DX-VS201A S Video Audio Video Selector Switch User Guide
- June 17, 2024
- Dynex
Table of Contents
DYNEX DX-VS201A S Video Audio Video Selector Switch
Your S-Video Audio/Video Selector Switch lets you connect four video devices (such as a cable box, satellite receiver, DVD player, VCR, or game system) to a TV or home theater receiver that has only one S-Video jack or composite (RCA-type) video jack. Your selector switch acts as a signal splitter to send composite and S-Video signals and analog stereo audio to two destinations, such as a TV and VCR or two TVs.
Package contents
- S-Video Audio/Video Selector Switch
- Quick Setup Guide
Setting up your selector switch
- INPUT 1 and INPUT 4 can be used for composite video devices only.
- INPUT 2 and INPUT 3 can be used for either S-Video or composite video devices.
The jacks on your selector switch are color-coded. Most video and audio cables are also color-coded. Plug connectors into jacks with matching colors.
Note : Cables are not included.
To connect a video device to your selector switch:
-
Plug an S-Video cable into the S-VIDEO jack on INPUT 2 or INPUT 3 on your selector switch. Plug the other end of the cable into the S-VIDEO OUT jack on the S-Video device.
OR
Plug the yellow (video) connector on an AV cable into the VIDEO jack on INPUT 1, INPUT 2, INPUT3, or INPUT 4 on your selector switch. Plug the yellow connector on the other end of the AV cable into the VIDEO OUT jack on the composite video device. -
Plug an analog (RCA) audio cable into the R (red) and L (white) audio jacks next to the S-VIDEO jack on your selector switch. Plug the other ends of the cable into the R and L AUDIO OUT jacks on the S-Video device.
OR
Plug the red and white connectors on the AV cable into the R (red) and L (white) audio jacks next to the VIDEO jack on your selector switch. Plug the other ends of the cable into the R and L AUDIO OUT jacks on the composite video device.
To connect a TV or home theater receiver to your selector switch:
-
Plug an S-Video cable into the S-VIDEO jack on OUTPUT 1 or OUTPUT 2 on the back of your selector switch. Plug the other end of the cable into the S-VIDEO IN jack on the TV or home theater receiver.
OR
Plug the yellow (video) connector on an AV cable into the VIDEO jack on OUTPUT 1 or OUTPUT 2 on the back of your selector switch. Plug the yellow connector on the other end of the cable into the VIDEO IN jack on the TV or home theater receiver. -
Plug an analog (RCA) audio cable into the R (red) and L (white) audio jacks next to the S-VIDEO jack on the back of your selector switch. Plug the other ends of the cable into the R and L AUDIO OUT jacks on the S-Video device.
OR
Plug the red and white connectors on the AV cable into the R (red) and L (white) audio jacks next to the VIDEO jack on your selector switch. Plug the other ends of the cable into the R and L AUDIO OUT jacks on the composite video device.
To play from the connected device:
- On the TV or home theater receiver, select the video input source for the video jack you connected your selector switch to. For information about selecting a video input source, see the documentation that came with the TV or home theater receiver.
- Press the input selector selector button on the front of your selector switch that corresponds to the jacks the device you want to use is connected to. AV 1 corresponds to INPUT 1, AV 2 corresponds to INPUT 2, AV 3 corresponds to INPUT 3, and AV 4 corresponds to INPUT 4.
One-year limited warranty
For a complete warranty, visit www.dynexproducts.com.
Contact Dynex:
For customer service call
1-800-305-2204
www.dynexproducts.com
© 2011 BBY Solutions, Inc. All Rights Reserved. DYNEX is a trademark of BBY
Solutions, Inc. Registered in some countries. All other products and brand
names are trademarks of their respective owners.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>