GIGABYTE GP-P650G 650W Certified Active PFC Power Supply Instruction Manual
- June 17, 2024
- Gigabyte
Table of Contents
GIGABYTE GP-P650G 650W Certified Active PFC Power Supply
Power supply manual
installation
-
Unscrew and open the side panel of the chassis
-
Install the power supply as below
-
Connect Motherboard (20+4 Pin) and CPU {4+4 Pin) connectors to your motherboard
-
Connect other connectors, like PCI-E (6+2pin), SATA and Molex from power supply to your system components and make sure that an of them are well connected
-
Close the chassis and reattach the case screws
-
Plug in the power cord of the power supply and switch on the power
Cautions and Warnings
-
Please unplug or switch off the power supply when installing it
Please make sure that the power source is consistent and stable before switching on the power supply -
Do not plug or unplug the power cord when the power supply is on. It will cause serious damage to your components
-
Do not use the power supply in a high humidity or high-temperature environment
-
High voltage exists in the power supply and only and authorized service technician can open the power supply
-
All warranties and guarantees will be voided in the event of failure to comply with any of the warnings and cautions covered in this manual.
-
If the power supply is not working properly, please contact our Product Service Center.
Troubleshooting
If your computer does not work normally after installing the power supply, please follow the troubleshooting guide as listed below:
- Please make sure the AC power is connected correctly
- Please make sure the Motherboard 20+4pin and CPU 8 pin connectors are connected correctly to the motherboard
- If the power supply still does not work normally, please contact our service center immediately
Warranty
Gigabyte provides hardware limited warranty for the power supply on the date
of purchase and guarantees this device to be free of defects in material and
workmanship. Please keep your receipt with safety.
This product is designed only for computer and using this device in any other
purposes will void the warranty. If you are not familiar with power supply
installation, please ask for professional technical assistance.
The warranty is applied to damages caused through normal usage and it wil be
void if the device was damaged because of abuse, alteration, misuse,
negligence, incorrect voltage supply, air/water pollution, accidents and
natural disasters.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>