NIGHT OWL FWIP3-FL Floodlight Deterrence Wired Camera User Guide

NIGHT OWL FWIP3-FL Floodlight Deterrence Wired Camera

What’s Included

NOTE : You may need a drill, screwdriver and ladder to properly install/mount the camera.

Camera Details

If you are a first-time user, go ahead and download the Night Owl app. Quickly create an account and log in.
Already have an account? Simply log in.

Installation Location

Choose where you will be mounting the floodlight camera. The recommended installation height is 9 ft. for optimal performance and to minimize tampering.

Turn Power Off

Locate the breaker and shut the power off for the area where you will be connecting the camera.
IMPORTANT : If you do not know where the breaker is or how to shut off the power, consult a professional electrician.

WARNING : Risk of Electrical Shock

• Disconnect power at the fuse or circuit breaker before installation.
• Verify the supply voltage is correct. Connect the camera to a 100 VAC ~ 240 VAC 50/60 Hz power source.
• Properly ground the camera.
• Always follow code standards when installing wired connections.
• If you are outside of North America, installation and wiring must be performed by a licensed electrician.

CAUTION : Risk of Fire

• DO NOT install near a combustible or flammable surface.

NOTICE

• DO NOT connect this camera to a dimmer switch or timer.
• The floodlight camera must be installed on a wall and on a UL-listed junction box.

Camera Assembly Diagram

Install Mounting Bracket

Attach the metal mounting bracket to your junction box.

Floodlight Deterrence Wired Camera with 2-Way Audio – White WCM-FWIP3-FL

Wiring the Camera

If needed, use the provided hook to hang the camera from the mounting bracket. Simply remove the small rubber plug from the bottom of the camera and insert the hook. With the waterproof cushion in place, use the wire nuts to attach the wiring from the junction box to the camera. This typically involves the following:

• Black Wire (Hot)
• White Wire (Neutral)
• Yellow / Green Wire (Ground)

Use the ground screw to fix the ground wire to the metal bracket. IMPORTANT : Depending on your home’s age, these wires may be different colors. If you are unsure, please consult a professional electrician.

Mount your Camera

Place the camera on the mounting bracket and use the camera mount screw to secure it. Once secure, place the silicone cap over the screw to make it watertight.

IMPORTANT : If you used the hook to hang the camera during wiring, please place it back into the bottom of the camera at this time.

Restore Power to the Breaker

With the camera wired and mounted, you can now restore power at the breaker.

Add your Camera

To begin viewing your camera and adjust the floodlights, add it to the Night Owl app or to a compatible recorder.
For more detailed setup steps, scan the QR codes below.

Adjust your Camera

With the camera now paired, you can use live view to adjust the camera viewing angle and light angles. Loosen the adjustment knobs to get the perfect positioning for each. Once acquired, retighten the knobs and use the lock collars to lock them into place.

microSD Card

If using the camera as a standalone (no recorder), you will need to insert a microSD Card (up to 128GB) for video storage.

Status LED Guide

Additional Tips

• Check Connections: Ensure all the screws are tight, knobs are tight, lock collars are locked in place, and that the camera is securely mounted.
• Check Wi-Fi Strength: For optimal performance, make sure your camera is within good range of your Wi-Fi router or recorder.
• Maintenance: Periodically check and clean your camera lens for clear video quality.
• Electrical Safety: If at any point you feel unsure about the electrical aspects of installing this camera, Night Owl STRONGLY RECOMMENDS you consult with a professional electrician.

Need Help?
We are here for you
Our support site is filled with self-help material. From your support page, you can use the Live Chat feature or contact our Live Phone support.

1. Please visit Support.NightOwlSP.com
2. Enter FWIP3-FL into the Search bar

FCC RADIATION NORM

FCC
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC Compliance Statement These limits are designed to provide reasonable protection against frequency interference in residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed or used under the instructions, may cause harmful interference to radio communication. However, there is no guarantee that interference will not occur in television reception, which can be determined by turning the equipment off and on. The user is encouraged to try and correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

CAUTION!
The Federal Communications Commission warns the user that changes or modifications to the unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment should be installed and operated with a minimum distance of 8 inches between the radiator and your body.
QSG-FWIP3-FL 5-010324

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>