NIGHT OWL Indoor Pan and Tilt Camera User Guide

June 1, 2024
NIGHT OWL

NIGHT OWL Indoor Pan and Tilt Camera

NIGHT-OWL-Indoor-Pan-and-Tilt-Camera- PRODUCT

Specifications

  • Indoor Pan and Tilt Camera
  • Microphone
  • Status LED
  • Lens
  • microSD Card Slot (supports up to 128GB)
  • Speaker
  • Power Adapter
  • Mounting Hardware

What’s Included
The package includes an Indoor Pan and Tilt Camera, USB Cable, Power Adapter, and Mounting Hardware. Note that for mounting the camera, you will require a screwdriver or drill (not included).

Camera Details
The camera features a Microphone, Status LED, Lens, microSD Card Slot, Speaker, Power button, and Reset button. It can be wall-mounted using the provided hardware.

Download the Night Owl App
If you are a new user, download the Night Owl app, create an account, and log in. Existing users can simply log in to the app.

Plug It In:
Connect the camera to a power source using the provided USB cable and power adapter. During initial setup, ensure the camera is within 1 to 3 feet of your router or recorder.

What’s Included

NOTE: If mounting the camera, you will need a screwdriver or drill (not included).

Camera Details

Download the Night Owl App

If you are a first-time user, go ahead and download the Night Owl app. Quickly create an account and log in.
Already have an account? Simply log in.

Plug It In

Use the provided USB cable and power adapter to plug your camera into an outlet.

NOTE: For initial setup/pairing, have your camera within 1 to 3 feet of your router or recorder.

Add your Camera

To begin viewing your camera, add it to the Night Owl app or to a compatible recorder.
For more detailed setup steps, scan the QR codes below.

MicroSD Card

If using the camera as a standalone (no recorder), you will need to insert a microSD Card (up to 128GB) for video storage.

NOTE: With the camera powered on and connected to the Night Owl app, you can use the pan and tilt controls in the app to tilt the camera up to reveal the microSD Card insert. microSD Card sold separately.

Status LED Guide

Solid Red Camera Powering ON
Fast Blinking Blue Ready to Pair
Slow Blinking Blue Pairing / Reconnecting
Solid Blue Camera ON and Paired
Fast Blinking Red & Blue Firmware Upgrade

Install the Camera

Your camera can be set up 2 different ways:

  • Place the camera on a shelf or other flat surface.
  • Use the provided mounting hardware to mount the camera to your wall or ceiling.

Need Help?

We are here for you
Our support site is filled with self-help material. From your support page you can use the Live Chat feature or contact our Live Phone support.

  1. Please visit Support.NightOwlSP.com
  2. Enter FWIP3 into the Search bar

FCC RADIATION NORM

FCC
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. this device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

FCC Compliance Statement
These limits are designed to provide reasonable protection against frequency interference in residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed or used in accordance with the instructions, may cause harmful interference to radio communication. However, there is no guarantee that interference will not occur in television reception, which can be determined by turning the equipment off and on. The user is encouraged to try and correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and the receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

CAUTION!
The Federal Communications Commission warns the user that changes or modifications to the unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment should be installed and operated with a minimum distance of 8 inches between the radiator and your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

NIGHT OWL User Manuals

Related Manuals