NOXARTE JX001-01 Reversible Low Profile Ceiling Fan Light Instruction Manual

NOXARTE JX001-01 Reversible Low Profile Ceiling Fan Light

Contact Information

Please contact us with following information:

1. Screen shot of your order page, including product picture, name and order ID number.
2. Problem details with pictures / short video if possbile.

Email: lightingcustomercare@gmail.com

Packing List

Part

|

Description

|

Quantity

---|---|---
A| Bracket| 1
B| Canopy| 1
C| Fan Assembly| 1
D| Remote Control| 1
E| Remote Holder| 1

Installation kit

• AA

• BB

• CC

• DD

• EE

• FF

Note:

Some extra hardware may be included. The quantity listed above is the number required for installation.

Safety Rules

1. Be sure the power to the wires you are working on is disconnected, either the fuse is removed or the circuit breaker is turned off. Turning the power off using the light switch is not sufficient to prevent electrical shock.
2. A qualified licensed electrician is required for the installation.
3. The outlet box and support structure must be securely mounted and capable of reliably /supporting a minimum of 50 pounds. Use only UL (cUL for Canadian Installation) listed mounting boxes marked “FOR FAN SUPPORT”.
4. The fan must be mounted with a minimum of 7 feet clearance from the trailing edge of the blades to the floor.
5. Do not operate reversing switch while fan blades are in motion (if applicable). Fan must be turned off and blades stopped before reversing blade direction.
6. Do not place any objects in the path of the blades.
7. To avoid personal injury or damage to the fan and other items, be cautious when working around or cleaning the fan.
8. Do not use water or detergents when cleaning the fan or fan blades. A dry dust cloth or lightly dampened soft cloth will be suitable for the cleaning.
9. After marking electrical connections, spliced conductors should be turned upward and pushed carefully up into outlet box. The wires should be spread apart with the grounded conductor on one side of the outlet box.
10. Electrical diagrams are reference only, different fan light may have different light shade and bulbs.
11. Use only our replacement parts. This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules.
    These limits are to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications.

Warning:

To reduce the risk of personal injury, use only the two steel screws and washers provided with the outlet box for mounting to the outlet box. Most outlet boxes commonly used for the support of lighting fixtures are not acceptable for fan support and need to be replaced, consult a qualified electrician if in doubt.

To reduce the risk of fire, electric shock or person injury, mount fan to outlet box marked “acceptable for fan support”.
To reduce the risk of personal injury, do not bend the blade brackets (also referred to as flanges) during assembly or after installation. Do not insert objects in the path of the blades.

Tools You Need

If mounting to a support structure, you will also need the optional tools.

What to Expect with Your Installation

Installation Step 1 (Mount the Bracket)

Loosen screws from the canopy (don’t take off), take out the bracket from the canopy.

With Outlet Box: Fix the bracket onto the outlet box with screws from the outlet box, fix the cross bar of the bracket onto to the ceiling with 4 wood screws (optional).

Without Outlet Box: Fix the cross bar onto the solid wood structure with 4 wood screws.

Option 1

OR

Option 2

Installation Step 2 (Connect the Wires)

1. Hang the fixture onto the bracket with “S” hook provided.
   

2. Connect wires from the fixture to the wires from outlet box with wire nuts,
   ground wire (green, green/yellow or bare copper) to ground wire, neutral wire
   (white or blue) to the neutral wire, hot wire (black or brown) to the hot wire.
   Wrap the connection with electrical tape.

3. Take away the “S” hook

Installation Step 3 (Fix the Canopy)

1. Fix the bracket screws onto the bracket but not tighten them.
2. Align the “L” slots from the canopy to the screws on the bracket, rotate the canopy to lock it onto the bracket.
3. Tighten the screws.

Installation Step 4 (Install the Remote Holder)

1. Insert 2 batteries before using:
   AAA 1.5V battery x 2pcs (not included)

2. Install the remote holder onto the wall with screws.

Remote Control Instructions

NOTE:

Please insert 2 batteries before using.
AAA 1.5V battery x 2pcs (not included

1. Turn off power.
2. Fan moves forwards or reversely.
3. Turn on the fan on 1/2/3/4/5/6 speed.
4. Turn on/off the light.
5. Adjust the brightness of the light.
6. Adjust the light color temperature.
7. Natural wind, fan speed will change automatically with this function.
8. Turn on/off the wind guide wheel to change the wind direction.
9. Turn on/off the fan.
10. Turn on/off the RGB light.
11. Change the RGB light color.
12. 1H/4H for timing the fan.
13. Change the RGB light mode.

REMOTE SIGNAL PAIRING: If the remote control looses signal of the fan, press and hold the button ① at the very beginning after it’s turned on from wall switch. After the light flashes 3 times, it’s done.

Tuya App Setup Step 1 (Download and Install the Tuya App)

Scan the QR code and install the APP in your phone, or search and install “Tuya” from Google Play, Apple App and other APP stores.
Make sure your phone is connected to the internet and bluetooth enabled.

Tuya App Setup Step 2 (Enter Pairing Mode)

There are two ways to enter pairing mode:

using remote:

press and hold the button ⑨(Turn on/off the fan) for 5 seconds, when the light blinks or breathes, it indicates that the light has successfully entered pairing mode.

OR Using wall switch:

Turn the wall switch ON and OFF 3 times continuously, when the light blinks or breathes, it indicates that the light has successfully entered pairing mode.

Tuya App Setup Step 3 (Setup Your Fan with Tuya App)

Do not choose a 5G Hz WIFI network at your cellphone!

This will result in the connection failure to Alexa or other smart devices. Please select a 2.4G Hz nWIFI network.

The step may vary due to app update. Follow the app instruction to complete the setup.

Tuya App Setup Step 3 (Setup Your Fan with Tuya App)

Do not choose a 5G Hz WIFI network at your cellphone!

This will result in the connection failure to Alexa or other smart devices. Please select a 2.4G Hz WIFI network.

The step may vary due to app update. Follow the app instruction to complete the setup.

1. Tap ‘Add Device’ on home page
   

2. Find ‘ceiling fan (BLE+WiFi)’ to add if the device doesn’t prompt out automatically
   

3. Follow Tuya app setup step 2 in Pg. 10 to enter pairing mode
   

4. Tap ‘Blink Quickly’. If you have linking problems with your light in slow flash or breathing mode, please select the ‘Blink Quickly’ and try to connect again.

5. Select 2.4GHz Wi-Fi network and enter password.
   

6. Setup completed.
   

Tuya App Control Instructions

Light control page

RGB monochromatic light control page

RGB light mode control page

Fan control page

RGB lights will change rhythmically in response to the incoming sound.

Settings page including fan timer and other functions

Alexa Voice Control Setup

Please download the ALEXA app and sign in to your account before proceeding with the following steps

1. After pairing you device with Tuya app. Open Tuya app and tap ‘Me’
   

2. Tap ‘Alexa’
   

3. Sign in with amazon
   

4. Tap ‘LINK’ and follow  the instruction
   

5. When the page jumps back, link completed
   

6. Open Alexa app in devices page tap ‘All Devices’
   

7. You can also control the fan and light function with Alexa App.

NOTE:

1. When using Alexa App to control, the fan and light function are in different control pages.
2. Please enter the Fan and Light Control Page separately and set distinct device names for the fan and light functions. Doing so will prevent Alexa from misunderstanding voice commands, ensuring clear differentiation between turning on the ‘Fan’ or ‘Light’.

8. Open the fan control page, tap to change light device name

9. You can control fan device with it’s new name. For example: ‘Alexa, turn on the bedroom fan’

10. Open the light control page, tap to change light device name

11. You can control light device with it’s new name. For example: ‘Alexa, turn on the bedroom light’

Alexa Voice Control Command

Alexa，turn on  
Light Brightness| Alexa，brighten Light divice name >
Alexa，dim Alexa，make
Alexa，set to <1-100> percent
Light Color
Temperature| Alexa，make warmer
Alexa，make cooler
Alexa，make warm white/white/ cool white
RGB Light Power| Alexa，turn on
Alexa，turn off
RGB Light
Brightness| Alexa，brighten
Alexa，dim
RGB Light Color| Alexa，change
Fan Power| Alexa，turn on
Alexa，turn off
Fans hake| Alexa，turn on 
Alexa，turn off
Fan Speed| Alexa，set an speed to <1-6>
Alexa，set to maximum
Alexa， set to minimum
Alexa，turn up
Wind Direction| Alexa，set  to reverse
Alexa，set to forward
Wind Mode| Alexa，set to nature
Alexa，set  to fresh

Google Home Control Setup

Please download the Google Home app and sign in to your account before proceeding with the following steps

1. After pairing you device with Tuya app. Open Tuya app and tap ‘Me’
   

2. Tap ‘Google Assistant’
   

3. Tap ‘Link with Google Assistant’
   

4. Waiting for the page to jump back, tap ‘Agree and link’
   

5. After completing the link, open the Google Home app
   

6. Light/RGB/fan/fans hake will appear in 4 separate devices in an automated popup window waiting for you to set them up
   

7. Select the light device and follow the instructions on the page to complete the setup
   

8. Follow the same steps to complete the fan device setup
   

9. Four devices will appear on the main page
   

10. Open the light device control page and tap to rename your light device
    

11. Rename the fan device in the same way
    

Google Home Control Command

Hey Google, turn off
Light Brightness| Hey Google, brighten
Hey Google, dim
Hey Google, set to <1-100> percent
Light Color
Temperature| Hey Google, set warm white
Hey Google, set white
Hey Google, set cool white
RGB Light Power| Hey Google, turn on
Hey Google, turn off
RGB Light Power| Hey Google, change to
RGB Light
Brightness| Hey Google, brighten
Hey Google, dim
Hey Google, set to <1-100> percent
Fan Power| Hey Google, turn on
Hey Google, turn off < fan device name>
Fan Speed| Hey Google, set speed to <1-100> percent
Hey Google, set speed to maximum
Hey Google, set speed to minimum
Hey Google, increase speed
Hey Google, decrease speed

Trouble Shooting

1. Fan doesn’t work
   • Make sure the fixture is connected to an ON/OFF wall switch, not dimmer switch.
   • Check the remote control battery (not included in this package).
   • Check the circuit breaker to ensure the power is on.
   • Turn off power from the circuit breaker, then loosen the canopy and check all the connections according to the wiring diagram.
2. Lights Do Not Light Up / Flicker / Noisy Operation
   • Make sure the fixture is connected to an ON/OFF wall switch, not dimmer switch.
   • Check your power and switch to make sure it’s power on.
3.  Noisy Operation
   • Re-tighten all screws on bracket.
   • Check to see if any of the blades are cracked. If so, replace the blades.
4.  Remote does not work
   • Make sure the battery is installed correctly.
   • Pair the remote control again (See page 9).
   • Install 2 new batteries.

Clean And Care

To clean, wipe the fixture with soft cloth. Spray from chemical cleaners can discolor the finish of the fixture. Do not use scouring pads, powders, steel wool or abrasive paper to clean this fixture.

Ordering Parts

Keep this manual for future reference, and in case replacement parts are needed.

Available parts can be ordered from place of purchase. Use exact wording from diagrams when ordering parts.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>