Zhenghaixin ZHX-PB24 Power Bank Instruction Manual
- June 17, 2024
- Zhenghaixin
Table of Contents
Zhenghaixin ZHX-PB24 Power Bank
Product Description
Product Parameters
- Name: Power Bank
- Model: ZHX-PB24
- Battery type: Polymer carp battery
- Battery capacity: 10000mAh/3.85V/38.5Wh
- Rated capacity: 6000mAh(SV-2A)
- Type-C port input: SV-3A; 9V-2A
- Type-C port output: support (PPS) 5~5.9V-3A, 5~ 11V-2A, support (PD3.0/PD2.0) SV-3A, 9V-2.22A, 12V-l.5A
- USB A port output: 4.SV-SA (SCP); SV-4.SA(SCP); SV-3A:9V-2A:12V-l.5A
- Wireless charging output: 5W/7.5W/10W/15W Max
- Total output: SV-3A
- Product size: 111X69.5Xl 9mm
- Product weight: approx. 200 g
Instructions For Use
- Please check whether your mobile phone is suitable for the fast charging protocol before use, and the charging equipment must meet the fast charging protocol standards to enjoy the fast charging function of this product.
- This product is suitable for iP series 20W fast charging protocol, and also suitable for 18W or 22.SW fast charging protocol charging.
- Use the charger to charge this product: insert the TYPE-C charging cable interface into the TYPE-C interface, turn on the power, and the product enters the charging state.
Packing List
- Power bank xl
- User Manual xl
- Charging cable xl
Safety Guidance
- This product uses lithium-ion batteries, overcharge or over discharge will affect the service life of the product, please charge and disconnect the power supply after charging and fully charging in time.
- Do not disassemble or put this product into the fire without authorization, otherwise it will cause fire or explosion.
- Do not use this product in high temperature, humidity or corrosive liquid for a long time to avoid leakage due to circuit damage.
- If stored for a long time, please keep the electricity of the product at about 80% and store it in a dry and ventilated place.
- Please use this product properly, any extrusion, drop, impact may cause damage and use effect to the product.
- Please keep this product out of reach of children.
FCC Statement
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
FCC Radiation Exposure statement
The device has been evaluate to meel general RF exposure requirement.
The device can be used in probable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>