BELLEZE 014-HG-41893 68 Wood TV Stand with 36 Electric Fireplace User Manual

: June 17, 2024
: BELLEZE

Table of Contents

PACKAGE CONTENTS
Assembly Instructions
FURNITURE CARE AND MAINTENANCE
WARRANTY
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BELLEZE 014-HG-41893 68 Wood TV Stand with 36 Electric Fireplace User Manual

Estimated time for assembly:
100 mins

Weight limitations are as follows:

Assemble the furniture on an empty carton, carpet, or rug to prevent scratches or damage.

For safety, please keep pets and children away from the assembly area.

Ensure the product is fully assembled before use. If you are missing any hardware or products, do not use it until you have restored the missing parts.

This furniture requires 2 people for assembly.

Read this instruction manual prior to assembly to familiarize yourself with the various steps.

Lay out all components and hardware separately on a flat surface and make sure that no parts are missing or damaged before assembly. Do not destroy or discard any packaging until you are certain that you have all the necessary parts for assembly.

Hand tight all hardwares and careful not to over tighten to avoid damaging the product.

CAUTION

There are small components used in the construction of this product. Loose items should be kept away from pets and children to avoid a choking hazard.

Keep all plastic bags and packaging film away from pets and children to avoid suffocation.

PACKAGE CONTENTS

CODE	DESCRIPTION	QTY
1	Top Panel	1
2	Bottom Panel	1
3	Side Panel	2
Left Medial Panel	1
5	Right Medial Panel	1
6	Center Panel	1
7	Side Storage Shelf Panel	2
8	Side Bath Panel	2
9	Center Back Panel	i
10	Center Surround Panel	i
11	Left Surround Panel	1
12	Right Surround Panel	1
13	Lett Cabinet Door	1
14	Reint Cabinet Door	1
15	Support Crossbar	1
16	Metal Crossbar	1
17	Front Leg	1
18	Side Leg Crossbar	1
10	Center Leg Crossbar	1
20	Center Leg	1
21	Back Leg	1
22	Wood Trip	1

Required tools for assembly (Not included)

Assembly Instructions

Attach cam bolts to the bottom panel (2), medial panels (4, 5), and center panel (6).
Insert wood dowels to the side panels (3), medial panels (4, 5), center panel (6), and support crossbar (15).
Assemble surround panels (10, 11, 12) to the medial panels (4, 5) and center
Assemble the support crossbar (15) to the center panel (6).
Assemble the right medial panel (5) to the center panel (6).
Assemble the left medial panel (4) to the other side of the center panel (6).
Assemble the medial panels (4, 5) to the bottom panel (2)
Assemble the metal crossbar (16) between the medial panels.
Assemble side panels (3) onto the bottom panel (2).
Slide back panels (8, 9) to the back of the stand.
Attach cam bolts to the underside of the top panel (1).
Assemble the top panel (1) on top of the stand.
Assemble leg crossbars (18, 19) to the front leg (17).
Note: Leave bolts 80% tightened.
Assemble back leg (21) to the other side of the leg crossbars.
Note: Leave bolts 80% tightened.
Assemble the center leg (20) under the leg frame.
Assemble the legs under the bottom panel.
Note: Tighten all the bolts.
Secure the back panels in place.
Insert shelf pegs into the stand and put in the side storage shelf panels (7).
Attach door hinges to the cabinet doors (13, 14).
Attach door handle to the cabinet doors.
Attach cabinet doors to the stand.
When the clearance of the door is uneven,
Adjust the cabinet door according to the figure,

lf you still have trouble while adjusting the door. please contact us
Up and down adjustment by loosening the screws on the mounting plate.

In and out adjustment by loosening the screws on the hinge arm.

Side to side adjustment using the front adjustment screw on the hinge.

Assemble your fireplace to the stand.
*For the exact instruction, please refer to the user’s manual provided with the fireplace.
Set the unit from the front of the fireplace mantel and center it in the opening, check the alignment and attack the unit to the mantel by inserting screws through the drilled holes on the mantel.
Place decorative crystals / rocks into your fireplace.
*For the exact instruction, please refer to the user’s manual provided with the freplace.
Snap the fire place front panel onto the fireplace.
Attach anti-tipping straps to the back of the stand.
Affix the stand to a wall.

Furniture must permanently fixed to the wall stud with included anti-tipping device to prevent the furniture from tipping over.

  * Mark the drill position on the wall with a pencil.
  * Drill a small hole on the marked position.
  * Insert a wall anchor into the drilled hole.
  * Fixed the anti-tipping strap to the wall with provided screws.

Attach the wood strlp on top of the TV stand.

NOTE: Put the TV behind the wood strip to prevent it from falling off.

YOU’RE FINISHED!

Warning

Serious or fatal crushing injuries may occur if the furniture tip-over. Furniture must permanently affixed to the wall with included anti-tipping device in order to prevent the furniture from tipping over.

Different wall materials requires different types of wall anchors or screws. Use a suitable wall anchors or screws for your specific wall in order to secure the stability and load bearing capacity of the furniture. If you are uncertain about which type of device to use, please contact us or your local hardware store.

Warning

Only place items on top of the product if they meet the recommended size and weight limits.

Climbing on, stepping on, or placing overweighted objects on the product may cause property damage and/or injuries.

Items placed onto this product must be resting on a support surface without hanging over the edges.

WARNING

For use with televisions weighing 70lbs (31.8kg) or less. Use with heavier televisions may result in instability, causing tip over resulting in death or serious injury.

Death or serious injury may occur when children climb on audio and/or video equipment furniture. A remote control or toys placed on the furnishing may encourage a child to climb on the furnishing and as a result the furnishing may tip over on to the child.

Relocating audio and/or video equipment to furniture not specifically designed to support audio and/or video equipment may result in death or serious injury due to the furnishing collapsing or over turning onto a child.

NOTICE

The recommended maximum width of the television is 75 inches. Do not exceed the maximum load capacity.
This product is designed for flat panel TVs only

FURNITURE CARE AND MAINTENANCE

Thank you for your purchase. We want your item to last as long as possible.
To ensure the product gives you years of longevity, please follow the recommendations in this care and maintenance guide.

MAINTENANCE

Tighten all bolts and screws again within the first 2 weeks of assembly.
Check the tightness of all bolts every 2 months and tighten them if necessary.

CLEANING

Clean the surface of the MDF (medium – density fiberboard) with a lightly dampened cloth.
A small amount of mild soap can be used if necessary.
Dry the surface immediately after cleaning.

DO NOT use bleach or alcohol to clean the surface.

DO NOT apply wood treatment on parts made with MDF.

MDF will swell and distort when exposed to water damage. Make sure to dry the furniture immediately after cleaning.

WARNING

The manufacturer and seller are not responsible for any and all liability relating to personal injury, property damage or losses, whether direct, indirect, or incidental, resulting from the incorrect attachment, improper use, inadequate maintenance, unapproved modification or neglect of this product.

© All copyright of this document belongs to BELLEZE.
This document may not be printed, translated, reproduced, or distributed in whole or in part without written permission from BELLEZE.