Curtron PP-C-120-4890 Polar-Pro Flexible Swinging Door for Walk-In Coolers & Freezers, 48″ wide x 90″ high Owner’s Manual

June 4, 2024
Curtron

Curtron PP-C-120-4890 Polar-Pro Flexible Swinging Door for Walk-In Coolers

& Freezers, 48″ wide x 90″ high Owner’s Manual

Curtron PP-C-120-4890 Polar-Pro Flexible Swinging Door for Walk-In Coolers &
Freezers

“Our Input for Your Success”

FIG 1 Feature

Thank you for choosing a Curtron quality product.

CHECK YOUR ORDER

The thickness of your door jamb will determine which mounting method to use. While standing inside the cooler or freezer, measure from the back of the closed door to the inside wall surface. (See drawings below.)

FIG 2 CHECK YOUR ORDER

FINAL ADJUSTMENTS

SEALING

FIG 3 FINAL ADJUSTMENTS

NOTES:

IN-JAMB MOUNTING

CAUTION: Make sure that the door jamb is strong enough to support the weight and force of the door. If questionable, check with cooler/freezer manufacturer.

FIG 4 IN-JAMB MOUNTING

FIG 5 IN-JAMB MOUNTING

WALL / IN-JAMB MOUNTING

This methods is primarily used for non-cooler/freezer doors

CAUTION: Make sure that the door jamb is strong enough to support the weight and force of the door. If questionable, check with cooler/freezer manufacturer

Do not disassemble the PVC panel from the bracket or remove the hinge pin from the mounting plate.

**NOTE: There is a Left and Right Door Panel unless otherwise specified. However, when using this mounting method, the panels are reversed from Method

1.**

FIG 6 WALL  IN-JAMB MOUNTING

FIG 7 WALL  IN-JAMB MOUNTING

CENTERING

If the panels are not aligning at the center overlap, a simple adjustment can be made.

FIG 8 CENTERING

TENSION

If the door panels are not returning to a completely sealed position, increased tension might be needed.

FIG 9 TENSION

To tighten or loosen the cam spring tension, first loosen the lock nut at the bottom of the mounting bracket. Using an allen wrench, move the tension screw clockwise to tighten or counterclockwise to loosen. Once the proper tension is determined, tighten the lock nut.

INSIDE SURFACE MOUNTING

CAUTION: Make sure that the door jamb is strong enough to support the weight and force of the door. If questionable, check with cooler/ freezer manufacturer.

Do not disassemble the PVC panel from the bracket or remove the hinge pin from the mounting plate.

NOTE: There is a Left and Right Door Panel, unless otherwise specified.

FIG 10 INSIDE SURFACE MOUNTING

FIG 11 INSIDE SURFACE MOUNTING

Read More About This Manual & Download PDF:

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Curtron User Manuals

Related Manuals