waterpik WF-04 Water Flosser White Chrome User Guide
- June 17, 2024
- Waterpik
Table of Contents
waterpik WF-04 Water Flosser White Chrome
Instruction for use
Step 1
Unit Prep
A. Connect power cord to power supply and to base unit. Plug into electrical outlet.
B. Assemble unit as shown.
C. Fill reservoir with warm water and place it firmly on the base. Slide pressure to high, point tip into sink, turn power ON until water flows. Turn power OFF.
Step 2
A. Slide to lowest pressure setting.
B. Place tip in mouth and close lips enough to prevent splashing. Turn power ON allowing water to flow from mouth into the sink. Increase pressure to your liking.
C. Aim water at the gumline at a 90 degree angle. Follow the gumline and pause briefly between teeth.
This device is compatible with voltages of 100 – 240 VAC, 50/60 Hz
©2018 Water Pik, Inc.
Customer Support
For a how-to video, product registration, and additional support visit waterpik.com/WelcomeWF
