waterpik WP-440 Water Flosser User Guide

June 17, 2024
Waterpik

waterpik WP-440 Water Flosser User Guide
waterpik WP-440 Water Flosser

Unit Prep

A. Turn power switch OFF, plug power cord into outlet, and insert the charging cord into the unit.

Charge Unit for 24 Hours Prior [ [ to First Use.

B. Press tip firmly into unit. To remove tip, push the tip eject button.

Caution : Do not press tip eject button while unit is running.

C. Unplug charging cord.
Lift the flip top on reservoir and fill with warm water. Refill as needed.
Unplug charging cord.

Water Floss

A. Start on low pressure and increase to your liking. With unit OFF, place tip in mouth. Turn power ON.
tip in mouth

B. Lean over sink. Close lips enough to prevent splashing.
Keep unit upright during use to ensure continuous water flow.
upright during

C. Aim water at the germline at a 90 degree angle. Follow the germline and pause briefly between teeth.
Aim water

TO AVOID MESS: KEEP TIP IN MOUTH WHILE UNIT IS ON.

Register your product and receive over $50 in savings.

waterpik.com/registration
Visit waterpik.com/howto450 to watch How To Video

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals