waterpik WP-861 Water Flosser Sonic Electric Toothbrus User Guide
- June 17, 2024
- Waterpik
Table of Contents
waterpik WP-861 Water Flosser Sonic Electric Toothbrus
QUICK START GUIDE
Review full instruction book prior to first use
-
FIRST USE
- Fill reservoir with warm water and replace it firmly on the base.
- Insert tip firmly until it clicks into place.
- Turn pressure to high, point tip into sink, turn power and water switches on until water flows. Then turn off.
-
START WATER FLOSSING
TO AVOID MESS: PLACE THE TIP IN YOUR MOUTH BEFORE TURNING UNIT ON
Turn power and water on.
Start on low pressure and increase to your liking. -
LEAN OVER SINK
Close lips enough to prevent splashing, while still allowing water to flow from mouth into the sink. -
TECHNIQUE
Aim water at the gumline at a 90° angle. Follow the gumline and pause briefly between teeth. -
HOW TO VIDEO
Visit waterpik.com/vid860
Register your product and receive over $50 in savings.waterpik.com/registration
Model WP-860/861/862/871/872/881/882
This device is only compatible with voltages of 120 VAC, 60Hz
© 2017 Water Pik, Inc.
1.800.525.2774 (USA)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>