waterpik WP-676 Aquarius Professional Water Flosser User Guide
- June 17, 2024
- Waterpik
Table of Contents
Waterpik WP-676 Aquarius Professional Water Flosser
Register your product and receive over $50 in savings. waterpik.com/registration Visit waterpik.com/HowTo660 to watch How To Video
Unit Prep
- A. Fill the reservoir with warm water and replace it firmly on the base
- B. Insert tip until it clicks into place.
- C. Turn pressure to high, point the tip into the sink, and turn the power and water switches ON until water flows. Turn switches OFF.
Water Floss
- A. Start on low pressure and increase to your liking. Turn the power ON.
- B. Turn the water ON. Close lips enough to prevent splashing, while still allowing water to flow from the mouth into the sink.
- C. Aim water at the gumline at a 990-degree angle. Follow the gumline and pause briefly between teeth.
TO AVOID MESS: KEEP TIP IN MOUTH WHILE UNIT IS ON.
This device is only compatible with voltages of 120 VAC, 60
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>