waterpik WF-05 Whitening Professional Water Flosser User Guide
- June 17, 2024
- Waterpik
Table of Contents
waterpik WF-05 Whitening Professional Water Flosser
Register your product and receive over $50 in savings.
waterpik.com/registration
Visit waterpik.com/WF05 to watch How To Video
Unit Prep
First-time use only
- A. Press the button to open the flip top.1 Insert tip through the top, align notches on the tip and handle (dots on the tip and flip top will align), and press firmly to click tip into place.2 Close flip top.3
- B. Fill the reservoir with warm water and replace it firmly on the base
- C. Turn pressure to high, point tip into the sink, and turn the power and water switches ON until water flows. Turn power and water OFF
Water Floss
- A. Load tablet into handle. Start on low pressure and increase to your liking
- B. With the water switch in OFF position, place the tip in the mouth. Turn the power ON.
- C. Lean over the sink. Turn the water switch to ON position.
- D. Aim water at the gumline at a 90-degree angle. Follow the gumline and pause briefly between teeth
TO AVOID MESS: KEEP TIP IN MOUTH WHILE UNIT IS ON
This device is only compatible with voltages of 120 VAC, 60
©2017 Water Pik, Inc.
Model WF-05
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>