waterpik WP-950 Complete Care 7.0 Water Flosser User Guide
- June 17, 2024
- Waterpik
Table of Contents
waterpik WP-950 Complete Care 7.0 Water Flosser
Review full instruction book prior to first use
FIRST USE
-
Fill reservoir with warm water and replace it firmly on the base.
-
Insert tip firmly until it clicks into place.
-
Turn pressure to high, point tip into sink, turn power and water switches on until water flows.
START WATER FLOSSING
Turn power and water on.
Start on low pressure and increase to your liking.
TO AVOID MESS:
PLACE THE TIP IN YOUR MOUTH BEFORE TURNING UNIT ON
LEAN OVER SINK
Close lips enough to prevent splashing, while still allowing water to flow from mouth into the sink.
TECHNIQUE
Aim water just above the gumline at a 90 degree angle.
Follow the gumline and pause briefly between teeth.
HOW TO VIDEO
Visit
waterpik.com/VID950
Register your product and receive over $30 in savings.
waterpik.com/registration
Model WP-950/952
This device is compatible with voltages of 120 VAC, 60Hz.
© 2017 Water Pik, Inc.
1.800.525.2774 (USA) 1.888.226.3042 (Canada)
