DISTRIBUTEL 230928 Wi-Fi 6 Pod Set User Guide
- June 17, 2024
- DISTRIBUTEL
Table of Contents
230928 Wi-Fi 6 Pod Set
User Guide
230928 Wi-Fi 6 Pod Set
Wi-Fi 6 Pod Set Up Guide
for Fibre Internet
Boost your Wi-Fi signal and coverage with additional pods
For best results we recommend a Wi-Fi pod on every floor; caIl us today to add
additional pods.
Follow these easy steps to set up your additional Wi-Fi pod(s):
- Place the additional Wi-Fi pod where you want it and plug it into a power outlet.
- When the light on the bottom of the Wi-Fi pod is solid green, your additional pod is now connected to your Wi-Fi network.
This can take up to 5 minutes.
Connecting Wired Devices
Each Wi-Fi 6 pod is equipped with three ethernet ports Your modem will take
one port on your main Wi-Fi pod. The second port or additional pods can be
used to connect a nearby device.
Setting Up Your Fibre Internet Service and Wi-Fi Network
If you are an existing Distributel Digital Home Phone or TV subscriber, please refer to helpcentre.distributel.ca after you have completed your Wi-Fi set up for additional instructions.
Step 1 – Fibre installation
A technician will bring the fibre terminal (ONT) as shown below and complete your fibre installation inside your home, this will take approximately 2-4 hours.
Before leaving they will test the fibre connection and leave the fibre terminal powered on.
Step 2 – Connect and power devices
Connect the ETHERNET cable from the fibre terminal to the Wi-Fi pod.
Plug the power supply for your Wi-Fi pod into a power outlet. The light on the bottom of the Wi-Fi pod should proceed from yellow to blue, then remain steady on green. This can take about 5 minutes.  Warning: Moving the fibre terminal may result in electrical hazard and internet service disruption.
If the light is red, restart the fibre terminal by pressing the On/Off button and unplug the Wi-Fi pod power adapters.
Wait 30 seconds, then press the fibre terminal On/Off button. Wait another 30 seconds, and plug in the Wi-Fi pod.
Step 3 – Connect to Wi-Fi
Go to Wi-Fi settings on a device you would like to connect, and search for available Wi-Fi networks.
Select the Wi-Fi Network (SSID) and enter the password that matches those found on the bottom of your Wi-Fi pod.
Customize Your Wi-Fi Name and Wi-Fi Password
Download the TP-Link Deco app from the Google Play or Apple App Store.
You will also find other features such as: parental controls, anti-virus and how to create a separate network for guests.
That’s it, you should now be ready to enjoy your Distributel Wi-Fi!
For general support for your Internet, or for
additional self-help
resources visit helpcentre.distributel.ca
or contact our Technical
Support team at 1-877-810-2877.
230808 Distributel Wi-Fi 6 Pod Set
Up Guide for Fibre Internet E
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>