DISTRIBUTEL Deco X50 Wi-Fi 6 Pod Set User Guide

June 13, 2024
DISTRIBUTEL

DISTRIBUTEL Deco X50 Wi-Fi 6 Pod Set

Setting Up Your Fibre Internet Service and Wi-Fi Network

If you are an existing Distributel Digital Home Phone or TV subscriber, please refer to helpcentre.distributel.ca after you have completed your Wi-Fi set up for additional instructions.

Step 1 – Fibre installation

A technician will complete your fiber installation inside your home, this will take approximately 2-4 hours.
The technician will test the fibre terminal/ONT, and leave it connected to the fibre internet cable and powered on.

Warning: Moving the fibre terminal may result in electrical hazard and internet service disruption.

Step 2 – Connect and power devices

Connect the ETHERNET cable from the fibre terminal to the Wi-Fi pod.
Plug the power supply for your Wi-Fipod into a power outlet.
The light on the bottom of the Wi-Fi pod should proceed from yellow to blue, then remain steady on green. This can take about 5 minutes.
Fibre installation

If the light is red, restart the fibre terminal by pressing the On/Off button and unplug the Wi-Fi pod power adaptors.
Wait 30 seconds, then press the fibre terminal On/Off button.
Wait another 30 seconds, and plug in the Wi-Fi pod.

Step 3 – Connect to Wi-Fi

Go to Wi-Fi settings on a device you would like to connect, and search for available Wi-Fi networks.
Select the Wi-Fi Network (SSID) and enter the password that matches those found on the bottom of your Wi-Fi pod.

Customize Your Wi-Fi Name and Wi-Fi Password

Download the TP-Link Deco app from the Google Play or Apple App Store.
You will also find other features such as: parental controls, anti-virus and how to create a separate network for guests.

That’s it, you should now be ready to enjoy your Distribute Wi-Fi!

Boost your Wi-Fi signal and coverage with additional pods

For best results we recommend a Wi-Fi pod on every floor; call us today to add additional pods.

Follow these easy steps to set up your additional Wi-Fi pod(s):

  1. Place the additional Wi-Fi pod where you want it and plug it into a power outlet.
  2. When the light on the bottom of the Wi-Fi pod is solid green, your additional pod is now connected to your Wi-Fi network. This can take up to 5 minutes.
    Boost your Wi-Fi signal and coverage with additional
pods

Connecting Wired Devices

Each Wi-Fi 6 pod is equipped with three ethernet ports

Your modem will take one port on your main Wi-Fi pod. The second port or additional pods can be used to connect a nearby device.

For example:

  1. Home Phone Analog
    Telephone Adapter (ATA)

  2. TV Set Top Box

  3. Gaming Console

  4. Computer
    Connecting Wired Devices

For general support for your Internet, or for additional self-help resources visit helpcentre.distributel.ca or contact our Technical Support team at 1-877-810-2877.

DISTRIBUTEL Logo

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals