DISTRIBUTEL CBN8000 Modem And Deco Wi-Fi 6 Pod User Guide
- June 13, 2024
- DISTRIBUTEL
Table of Contents
CBN8000 Modem and Deco Wi-Fi 6 Pod
Set Up Guide
CBN8000 Modem And Deco Wi-Fi 6 Pod
For general support for your Internet, or for additional self-help resources
visit helpcentre.distributel.ca or contact
our Technical Support team at
1-877-810-2877.
Setting Up Your High Speed Internet Service and Wi-Fi Network
Begin your Wi-Fi set up after your technician visit is complete or after your
installation window has passed.
Step 1 – Connect modem to cable outlet
Connect one end of the coaxial cable to the cable port on your modem and other
end to a nearby cable outlet. Step 2 – Connect and power devices
Connect one end of the ethernet cable to LAN port 1 of yourmodem and the other
end to any port on your Wi-Fi pod.
Plug the power supply for your modem and Wi-Fi pod into a power outlet.
The light on the bottom of the Wi-Fi pod should proceed from yellow to blue,
then remain steady on green. This can take about 5 minutes.
If the light is red, reboot the modem and Wi-Fi pod by unplugging the power
adaptors.
Wait 30 seconds, then plug back in the modem. Wait another 30 seconds, and
plug in the Wi-Fi pod.
Step 3 – Connect to Wi-Fi
Go to Wi-Fi settings on a device you would like to connect, and search for
available Wi-Fi networks.
Select the Wi-Fi Network (SSID) and enter the password that matches those
found on the bottom of your Wi-Fi pod.
Customize Your Wi-Fi Name and Wi-Fi Password
Download the TP-Link Deco app from the Google Play or Apple App Store.
You will also find other features such as:
parental controls, anti-virus and how to create a separate network for guests.
That’s it, you should now be ready to enjoy your Distributel Wi-Fi!
Boost your Wi-Fi signal and coverage with additional pods
For best results we recommend a Wi-Fi pod on every floor; caIl us today to add
additional pods.
Follow these easy steps to set up your additional Wi-Fi pod(s):
- Place the additional Wi-Fi pod where you want it and plug it into a power outlet.
- When the light on the bottom of the Wi-Fi pod is solid green, your additional pod is now connected to your Wi-Fi network. This can take up to 5 minutes.
Connecting Wired Devices
Each Wi-Fi 6 pod is equipped with three ethernet ports
Your modem will take one port on your main Wi-Fi pod. The second port or
additional pods can be used to connect a nearby device.
For example:
- Home Phone Analog Telephone Adapter (ATA)
- TV Set Top Box
- Gaming Console
- Computer
230808 Distributel CBN8000 Modem and Deco Wi-Fi 6 Pod Set Up Guide E
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>