Gazzyt GS20 Racing Simulator Stand Instruction Manual
- June 17, 2024
- Gazzyt
Table of Contents
Gazzyt GS20 Racing Simulator Stand
Specifications
- Product Name: GS20 Racing Simulator Stand
- Manufacturer: Gazzyt
- Material: M8, M6, Shim
- Weight: 6.0 kg
- Dimensions: 45 cm x 80 cm x 15 cm
Product Usage Instructions
Assembly Processes:
To assemble the GS20 Racing Simulator Stand, please follow these steps:
- Start by identifying the different components of the stand, including fixing plates, shims, and nuts.
- Place the fixing plates in the designated locations on the stand.
- Insert the shims (M8) into the provided slots on the stand. There are a total of 4 shims.
- Secure the shims in place using the nuts (M8). There are also 4 nuts provided.
Accessories Explanation:
The GS20 Racing Simulator Stand comes with the following accessories:
- Shim: M8 (4 PCS)
- Nut: M8 (4 PCS)
Frequently Asked Questions (FAQ)
-
What is the weight of the GS20 Racing Simulator Stand?
The GS20 Racing Simulator Stand weighs approximately 6.0 kg. -
What are the dimensions of the stand?
The dimensions of the GS20 Racing Simulator Stand are 45 cm x 80 cm x 15 cm. -
How many shims and nuts are included with the stand?
The stand comes with 4 shims (M8) and 4 nuts (M8).
accessories explanation
Assembly Processes
- Assemble the left and right adjusting plates with 4 pieces of the bolt(M8×20 ) and 4 pieces of the shim (M8)
- Assemble the pedal support with 4 pieces of the bolt (M8×20) and 4 pieces of the shim (M8)
- Assemble left and right adjusting stand with 4 pieces of the bolt (M8×45) 、4 pieces of the shim (M8) and 4 pieces of the nut (M8)
- Assemble the lower fixing stand with 6 pieces of the bolt (M8×45) and 6 pieces of the shim (M8)
-
Assemble the upper connection bracket with 2 pieces of the Handle Bolt (M8×15)
-
Assemble the steering wheel mounting bracket with 3 pieces of the bolt (M8×20) 、 3 pieces of the shim (M8) and 3 pieces of the nut (M8)
- Assemble the seat mounting stand with 4 pieces of the bolt (M8×20) 、4 pieces of the shim (M8) and 4 pieces of the Square Nut (M8 ×25×25×5)
- Assemble the seat adjustment stand with 4 pieces of the bolt (M8×20) 、4 pieces of the shim (M8) and 4 pieces of the nut (M8)
- Assemble the gear mounting stand with 2 pieces of the bolt (M6×16)、 2 pieces of the shim (M6) and 1 pieces of the Handle Bolt (M8×15)
- Assemble the elbow fixing stand and fixing plate on the left or right as your like to the Seat stand with 2 pieces of the bolt (M8×80) 、2 pieces of the shim (M8) and 2 pieces of the nut (M8)
- Connect the frontpart stand and the afterpart stand with 4 pieces of the Handle Bolt (M8×15)
ASSEMBLY INSTRUCTION
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>