Gazzyt GS37 Racing Simulator Stand Instruction Manual

Table of Contents

Gazzyt-GS37-Racing-Simulator-Stand-PRODCUT

Assembly Processes

To assemble the GS37 Racing Simulator Stand, follow the steps below:

Start by gathering all the components and accessories mentioned in the manual.
Begin by attaching the fixing plate to the main frame using the provided screws. Use the M8 screws and tighten them securely.
Next, insert the M8 shims (4 PCS) into the designated slots on the stand. These shims will help stabilize and adjust the height of the simulator.
Attach the remaining parts of the stand according to the diagrams provided in the manual. Use the appropriate screws and tighten them securely.
Once all parts are properly assembled, check for any loose connections or screws and tighten them if necessary.

The GS37 Racing Simulator Stand comes with several accessories:

M6 Screws (16 PCS): These screws are used to attach certain components.
M8 Screws (20 PCS) : These screws are used for attaching the fixing plate and other parts of the stand.
M8 Shims (4 PCS ): These shims are used to stabilize and adjust the height of the simulator.
Gazzyt 8.0 (1 PC): This is a specific component or accessory with the label “Gazzyt 8.0”.
M8 Screws (25 PCS) : These screws are used for various attachments and connections.
M8 Screws (5 PCS): These screws are used for specific attachments.
M8 Screws (15 PCS) : These screws are used for specific attachments.

Gazzyt-GS37-Racing-Simulator-Stand-FIG-1

Assemble the left and right retaining stand with 4 pieces of the bolt(M8×45 ) and 4 pieces of the shim (M8)
Assemble the base plate support stand with 2 pieces of the Handle Bolt (M8×15) 、 2 pieces of the bolt (M8×45) and 2 pieces of the shim (M8)
Assemble left and right adjusting stand with 2 pieces of the Handle Bolt (M8×15)
Assemble the steering wheel mounting stand with 4 pieces of the bolt (M8×45) 、4 pieces of the shim (M8) and 4 pieces of the nut (M8)
Assemble 4 picses of the anti-skid foot bolt (M8×20) to the frontpart stand
Assemble 4 picses of the anti-skid foot bolt (M8×20) to the afterpart stand
Assemble the seat mounting stand with 4 pieces of the bolt (M8×20) 、4 pieces of the shim (M8) and 4 pieces of the Square Nut (M8 ×25×25×5)
Assemble the seat adjustment stand with 4 pieces of the bolt (M8×20) 、4 pieces of the shim (M8) and 4 pieces of the nut (M8)
Assemble the gear mounting stand with 2 pieces of the bolt (M6×16)、 2 pieces of the shim (M6) and 1 pieces of the Handle Bolt (M8×15)
Assemble the elbow fixing stand and fixing plate on the left or right as your like to the Seat stand with 2 pieces of the bolt (M8×80) 、2 pieces of the shim (M8) and 2 pieces of the nut (M8)
Connect the frontpart stand and the afterpart stand with 4 pieces of the Handle Bolt (M8×15)

Gazzyt-GS37-Racing-Simulator-Stand-FIG-13

Q: How do I adjust the height of the simulator?
- A: The GS37 Racing Simulator Stand provides M8 shims that can be inserted into designated slots to adjust the height of the simulator. Insert or remove these shims as needed to achieve the desired height.
Q: What should I do if any parts are missing or damaged?
- A: If any parts are missing or damaged, please contact Gazzyt customer support for assistance. They will provide you with the necessary replacements or resolve the issue.
Q: Can I use this stand with any racing simulator?
- A: The GS37 Racing Simulator Stand is designed to be compatible with most racing simulators. However, it is recommended to check the dimensions and compatibility of your specific simulator with the stand before making a purchase.