OVERMAX 5.1 Pro Multipic Projector User Manual
- June 17, 2024
- OVERMAX
Table of Contents
OVERMAX 5.1 Pro Multipic Projector
Multipic 5.1 Pro
Specifications
| Language | Manual |
|---|---|
| PL | Instrukcja obsługi |
| EN | User Manual |
| DE | Bedienungsanleitung |
| IT | Manuale d’uso |
| FR | Manuel de l’Utilisateur |
| ES | Manual de usuario |
| NL | NL manual |
| UA | UA manual |
| LT | LT manual |
| HR | HR manual |
| HU | HU manual |
Product Information
Before starting to use the projector, please read and follow the instructions provided in this user manual. Incorrect handling of the device may result in electric shock and increase the risk of fire. Follow the instructions below during the use and maintenance of the projector:
- Avoid exposing the projector to water or moisture, as it may cause electrical shock or fire.
- Avoid bending the power cable; damage to the power cable may result in electric shock or fire.
- Clean the projector using a soft cloth to prevent scratching.
- To ensure stable heat dissipation, adjust the height of the projector using the base adjustment knob located at the bottom.
Product Usage Instructions
Description of Projector Parts (Figure 1)
- Base adjustment knob
- Infrared receiver
- Lens
- Power cable socket
- Wired network port
- Rear infrared receiver
- 3.5mm audio output
- HDMI port 1
- USB ports
- AV input
- HDMI port 2
- Remote control
- Fan
- Dust filter cover
- Dust filter
Panel (Figure 3)
- Direction buttons
- Power button
- Back button
Remote Control (Figure 4)
- Power on/off button
- Direction buttons
- Play/Stop buttons
- Menu button
- Volume up button
- Volume down button
- Mute button
- Confirmation button
- Exit button
- Image focus increase button
- Image focus decrease button
Installation
Standard Settings: Refer to the table below to adjust the image size and
projector distance.
| Size | Distance (m) |
|---|---|
| 50″ | 1.70 |
| 70″ | 2.38 |
| 100″ | 3.30 |
| 120″ | 3.97 |
Note : If the distance between the projector and the screen is smaller than the minimum distance or significantly larger, the image may appear blurry.
Methods of Projector Installation
Contact a professional installer to mount the projector on the ceiling. Correct positions for projector installation (Figure 6):
- Ceiling mount for front projection.
- Elevated placement for front projection.
- Ceiling mount for rear projection.
- Elevated placement for rear projection.
Warning: Improperly mounting the projector on the ceiling or any other surface may cause irreparable damage to the projector.
Device Operation
To turn on the projector, press the power button on the panel or the power
on/off button on the remote control. The projector is ready for operation when
the indicator light turns blue. Connect the desired device using the
appropriate input located on the rear of the projector.
Additional Features
For additional features, refer to the user manual for instructions on:
- Using applications
- System update
- Restoring factory settings
FAQ
Q: Where can I find the user manual in my language?
A: The user manual is available in multiple languages. Please refer to the
specifications section above to find the manual in your preferred language.
Q: How do I clean the projector?
A: Use a soft cloth to clean the projector and avoid using any abrasive
materials that may scratch the surface.
Q: What should I do if the image appears blurry?
A: Ensure that the distance between the projector and the screen is within
the recommended range mentioned in the installation section. Adjust the focus
using the remote control or the focus buttons on the panel.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>