insinkerator SS100-28 1 HP Commercial Garbage Disposer Instruction Manual

insinkerator SS100-28 1 HP Commercial Garbage Disposer

Product Information

Specifications

• Voltage/Phase Availability:
  • Model SS100-28: 115/208/230V, 1Ph
  • Model SSC100-1: 115/208/230V, 1Ph
  • Model SS100-35: 100/200/230V, 50/60Hz, 1Ph
  • Model SS100-47: 208/230/460V, 60Hz, 3Ph
  • Model SSC100-3: 208/230/460V, 60Hz, 3Ph
  • Model SS100-50: 208-230/460/3, 3Ph
  • Model SS200-27: 115/208/230V, 1Ph
  • Model SS200-31: 115/208/230V, 1Ph
  • Model SSC200-1: 115/208/230V, 1Ph
  • Model SS200-35: 208/230/460V, 60Hz, 3Ph
  • Model SS200-36: 208/230/460V, 60Hz, 3Ph
  • Model SS200-39: 380/50-60Hz, 3Ph
  • Model SSC200-3: 208/230/460V, 60Hz, 3Ph
  • Model SS300-21: 115/208/230V, 3Ph

FAQ

• Q: Can children use this appliance?
  • A: This appliance is not intended for use by persons (including children) with reduced physical sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
• Q: What should I do if the disposer gets jammed?
  • A: If the disposer stops suddenly, it may be due to overloading or a foreign object (metal) causing a jam. Turn the control to the off position and follow these steps:
  1. Insert a dejamming wrench (not supplied) slot down through the sink opening.
  2. Place the slot over the raised bars found on top of the rotating shredder.

For more information and support, please visit www.insinkerator.com/foodservice.

OPERATING INSTRUCTIONS

4 EASY STEPS TO ASSURE PROPER, CAREFREE OPERATION & LONG LIFE

Read and understand all the instructions before using the disposer. See important safety information on the reverse side.

This is the safety alert symbol. it is used to alert you to potential physical injury hazards.
Obey all safety messages that follow this symbol to avoid possible injury or death.

1. IMPORTANT: Do not feed food waste into disposer until unit is started and water is running.

   • PUSH THE START BUTTON on the control box to put the disposer in operation. Before you start feeding food waste into the disposer, make sure that a steady stream of water is flowing into the disposer.

2. FEED FOOD WASTE into the disposer in a steady, continuous flow.

   • Recommended cold water requirements:
     H.P. STANDARD

   • 1: 5 GPM

   • 2: 7 GPM

   • 3, 5: 8 GPM

   • 10: 10 GPM

   • Water Volume Adjustment: For all models the top of the swirling water should occasionally crest to the body water inlet.

3. LET WATER RUN for approximately three (3) minutes to clear the disposer of all ground waste.

   • Do not stop disposer with food waste in it.

4. PUSH THE STOP BUTTON on the control box to stop the disposer’s operation.

   • To prevent accidents, make sure the disposer is shut off before you leave it.
   • Do not put your hands into the disposer while it is in operation.

VOLTAGE/PHASE AVAILABILITY

IMPORTANT SAFETY INSTRUCTIONS

• This appliance is not intended for use by persons (including children) with reduced physical sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
• DO NOT operate without factory-recommended safety guards.
• DO NOT put your hands into the disposer while it is in operation.
• Switch off or unplug the appliance before attempting to free a jammed rotor with an implement.
• DO NOT put any of the following items into the disposer: clam or oyster shells, drain cleaner, glass, china, plastic wrap, large bones, metal objects, explosive materials, extremely hot water, grease, oil, or syrup.
• DO NOT overload disposer with excess amounts of food waste and water. The unit will consume food waste faster when you feed it steadily.
• DO NOT touch the water valve after the correct flow of water is achieved by adjusting plumbing valves. Grinding efficiency will be decreased if the water swirl is more than 1/2 way up the disposer body.
• DO NOT stop disposer with food waste in it; let it run for approximately three (3) minutes to clear itself of all ground waste. This will help maintain a clean and odor-free unit and avoid drainline stoppage.

RELEASING DISPOSER JAM

If the disposer stops suddenly it may be due to overloading or a foreign object (metal) has caused a jam condition.

Turn control to off position and complete following steps:

1. Insert dejamming wrench (not supplied) slot down through sink opening. Place slot over raised bars found on top of rotating shredder.
2. Twist dejamming wrench back and forth to free jam. Rotating shredder should revolve freely when jam is released.
3. Remove all foreign materials.
4. Allow disposer to cool for 3-5 minutes after it stops running. Press red reset button to reset overload protector. Never strike reset button with objects.
5. If disposer remains inoperative after following these steps, contact nearest InSinkErator Factory Authorized Service Center.

Contact

• Call: 1-800-845-8345 to find Service Center nearest you.
• 1250 International Drive
• Mount Pleasant, WI 53177
• TEL: 800.845.8345
• www.insinkerator.com/foodservice

References

• FoodService Equipment (Commercial) | InSinkErator US

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>