KInGSLim B08FT8LVSS D4 Pro Dash Cam User Manual

KInGSLim B08FT8LVSS D4 Pro Dash Cam

Product Information

Specifications

• D4 Dual Dash Cam: 1
• Waterproof Rear Camera: 1
• GPS Bracket: 1
• 7m Rear Camera Extension Cable: 1
• Car Charger with 3.5m Power Cable: 1
• Static Sticker: 2
• Screws: 2
• Double-sided Adhesive Tape for Rear Camera: 4
• Tape for GPS: 2
• Car Crowbar: 1
• Cable Clips: 5
• Quick Start Guide: 1

FAQ

• Q: What type of memory card should I use with the D4 Dash Cam?
  • A: It is recommended to use a Class 10 or above memory card with a capacity of up to 256GB.
• Q: How do I connect the rear camera to the dash cam?
  • A: Connect the rear camera with the extension cable to the designated port on the dash cam.
• Q: How do I install the rear camera for reversing function?
  • A: Install the rear camera near the license plate and connect the red trigger wire of the rear camera extension cable to the positive lead of the vehicle reversing lamp.
• Q: How do I format the memory card?
  • A: Tap the setting icon, select “Format memory card,” and confirm the action. Wait for the formatting process to finish.

WHAT’S IN THE BOX

CAMERA OVERVIEW

INSTALLATION

1. Insert the memory card.

   • Warm Tips: A Class 10 or above memory card is highly recommended for the D4 dash cam (memory card is not included). D4 dash cam supports an up to 256GB memory card. Please format your card in the camera before using this dash cam.
   • Do not remove or insert the memory card when the dash cam is turned on. This may damage the memory card.

2. Insert the bracket into the bracket slot.

3. Install the D4 dash cam on the windshield.

4. Clean the windshield with a dry cloth.

5. Take off the film of the static sticker, apply the static sticker to the windshield and make sure there is no air inside.

6. Peel off the film on one side of the double-sided adhesive tape and apply the adhesive tape to the D4 dash cam.

7. Peel off the other film on the adhesive tape, press the D4 dash cam to secure it on the static sticker. (If you want to remove the dash cam, please take off the static sticker.)
   Note: You can stick the dash cam on the windshield without the static sticker.

8. Adjust the viewing angle accordingly.

9. Connect the USB power cable into the USB power port of D4 Dash Cam, then plug the car charger into the cigarette lighter of your car.

10. Connect the rear camera with the extension cable into D4 Dash Cam to check whether the rear camera works well.

11. Install the Rear Camera.

    • Position 1: Install the rear camera on the rear windshield. The installation is easier.
    • Position 2: Install the rear camera near the license plate. Position 2 is highly recommended. The rear image is crisp and clear for both rear viewing and reversing guide.

To use the reversing function, please install the rear camera in position 2, then connect the red trigger wire of the rear camera extension cable to the positive lead of the vehicle reversing lamp.

Note

1. Pay attention to the connector position when connecting the rear camera with the extension cable, please refer to the below details.
2. Please clean the position to ensure the adhesive quality before installing the rear camera.
3. Please clean the rear windshield regularly to ensure the image quality if you choose the position 1.
4. If you choose the position 2, you can install the rear camera with the included adhesive stickers or screws.

Use the crowbar to hide the cables.

FORMATTING THE MEMORY CARD AND VIDEO RECORDING

FORMATTING THE MEMORY CARD

Please format your memory card in the camera before using this dash cam and use a high-speed memory card of Class 10 or higher.

1. Tap the setting icon to enter the Settings page.
2. Select “Format memory card”, then tap the “Confirm” icon. Wait a few seconds to finish the formatting and the system will exit automatically.

STARTING VIDEO RECORDING

1. After finishing formatting, connect a car charger and start the car engine, the device will automatically turn on and begin recording.
2. Loop recording is already enabled on the D4 dash cam, the default setting is 3 mins.
3. G-sensor is already enabled on the D4 dash cam, the default setting is low. If an impact or sudden braking is detected, it will automatically start recording and save footage to either the “Front Urgent Album” or “Back Urgent Album” folder.

ICON INTRODUCTION

The main interface

1. Recording indicator
2. Video time
3. Date/Time
4. GPS
5. Microphone indicator
6. Wifi indicator
7. Power status
8. Settings
9. Album
10. Emergency recording/Wifi
11. Audio Record (Mute/Unmute)
12. Stop/Start recording

SETUP MENU

Resolution

You can choose front camera resolution.

• Options: 4K25/2K30
• Default Setting: 4K25

The rear camera resolution is 1080P.

Video Encode

H.265 can minimize the footage size, meaning you can store more video files in the memory card. H.264 has better compatibility.

• Options: H.264/H.265
• Default Setting: H.264

Screen Dormant

The screen will be turned off automatically after the time you set.
After turning off, the screen will reduce power consumption. The camera still works while the display screen is turned off. Just click the screen and it will turn on.

• Options: Off/1MIN/3MINS
• Default Setting: 1MIN

Antiflicker Mode

Choose the right frequency to avoid flickering. This should be based on your local AC parameters.

• Options: 60Hz/50Hz
• Default Setting: 60Hz

Sensitivity

When the sensitivity mode is turned on, if an impact or sudden braking is detected, it will automatically start recording and save content. The videos will be locked and never be overwritten by new files. The higher the sensitivity level, the easier it is to trigger the emergency recording.

• Options: Off/Low/Middle/High
• Default Setting: Low

Parking

The camera will be turned on automatically and start the 20s recording and lock if there is an impact to the car during parking. The higher level you select, the easier it is to trigger the recording.

• Options: Off/Low/Middle/High
• Default Setting: Off

Note

• In parking mode, the screen will not display and the working indicator will be flickering while recording is in progress.
• When the dash cam is on, the message box is shown on screen.

Date Format

Set the format you prefer.

• Options: YY-MM-DD/DD-MM-YY/MM-DD-YY
• Default Setting: YY-MM-DD

Audio

Sound will be recorded simultaneously with the video.

• Options: On/Off
• Default Setting: On

Volume

Adjust the volume in the playback video.

• Options: Mute/Low/Middle/High
• Default Setting: Middle

Loop Recording

The files will be saved every 3 MIN if you choose the 3 MIN option. When the memory card is full, the new files will cover the old one if loop recording is on. If it is off, the camera will not record anymore when the card is full. You will then need to format the memory card or change to a new one.

• Options: Off/1Min/3Min/5Min
• Default Setting: 3Min

Set Time

• Set the date and time manually.

Note: If you want to set the time manually, please turn off the time zone setting.

Time Zone Setting

• Choose the time zone manually. The device will then display the time of the selected time zone.
• Default Setting: OFF

Language

• Options: English/简体中文/Français/日本語/Español/Deutsch/Italiano
• Default Setting: English

Format memory

• Format the memory card.

Note

1. All data will be deleted. Before formatting your memory card, please remember to back up your important data on your other devices.
2. When the memory card is inserted for the first time, please format it in the camera to ensure that the memory card is compatible with the camera.

GPS Info

• Check information related to your driving such as signal, speed, longitude, and latitude, etc.

Reset System

• The dash cam will be restored to factory settings.

About

• Check the version of the camera.

Album

• You can check your videos and photos. If you want to download content, please use the “Kingslim” app, or back up data on your computer.

GESTURES

Taking a Photo

• In the video recording mode, slide from left to right to take photos.

Switching Recording Display Modes

• Click the right side of the screen to switch recording display modes.

DOWNLOAD THE APP AND GPS PLAYER

• Download the “Kingslim” app on the App Store or Google Play.
• Download the GPS player: www.kingslim.net/player

USING THE “KINGSLIM” APP

CONNECT TO THE APP

1. Stop video recording on the dash cam.
2. Tap the Wifi icon on the dash cam.
3. Go to your smartphone’s Wifi settings and connect to the Wifi name that’s shown on the dash cam. Enter the password and confirm the Wifi network.
4. Open the “Kingslim” app, tap “Add Recorder”, wait a few seconds to enter the preview interface.
5. Tap the video or photo icon to control the dash cam, either recording videos or shooting photos.
6. Tap the switch icon to switch to the front or rear camera display.

DOWNLOAD OR DELETE VIDEOS AND PHOTOS

1. Tap the icon to stop the recording.
2. Tap the icon to check the videos or photos.
3. Tap “Select” and choose videos or photos that you want.
4. Tap the download or delete icon to download or delete.

Note: To exit the Wifi feature, please press the power button on the dash cam.

CHANGE RECORDING SETTINGS

• You can change recording settings in the app.

SPECIFICATIONS

• Front Camera: f/1.8, 170° FOV
• Rear Camera: f/2.0, 150° FOV
• Video: 4K+1080P@25fps/2.5k+1080P@30fps
• Screen: 3-inch IPS touchscreen
• Video Coding: H.264/H.265
• Input: 5V DC
• Working Temperature: -20°C~60°C (-4°F~140°F)

If your dashcam does not appear to be working properly, please follow these troubleshooting steps:

1. The dash cam can’t record.
   • Check whether your memory card has enough space. Please back up any important data to other devices first, and then format the memory card.
   • Check if the loop recording in the settings menu is set to OFF. Set “Loop Record” to 3 MINS.
2. When recording, it stops automatically.
   • At the time of recording, a large amount of high-definition video data is processed.
   • Please use a high-speed memory card of Class 10 or higher.
3. A “File Error” prompt appears when playing back pictures and videos.
   • Please use a genuine memory card. Please format the memory card.
4. The image is misty.
   • Ensure there are no fingerprints or other marks on the camera lens. Use a soft and dry cloth to clean the lens. Clean the front windshield.
5. Crashing
   • If your device crashes, use a sharp object to press the reset button to restart the device.
6. No sound on the video.
   • Ensure the audio recording mode is on.
7. The camera keeps turning on and off automatically.
   • Please charge the camera with the included car charger. Do not charge the battery via the USB data cable with other adapters.

CAUTION

1. Please place your device in a secure place and prevent the lens from scratches or dirt.
2. Do not expose the device to rain, moisture, or water under any circumstance.
3. Avoid leaving the device in direct sunlight for extended periods of time.
4. Do not dismantle or expose the internal battery.

CONTACT US

• For any inquiries about KingSlim products, please feel free to contact us. We will respond within 24 hours.
• Email: [email protected]
• Tel: 888-811-1140 (US)
• Official website: www.kingslim.net

SCAN

Documents / Resources

| KInGSLim B08FT8LVSS D4 Pro Dash Cam [pdf] User Manual
B08FT8LVSS D4 Pro Dash Cam, B08FT8LVSS, D4 Pro Dash Cam, Pro Dash Cam, Dash Cam, Cam
---|---

References

• Kingslim-Dash Camera

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>